Read the statement by Michael Teeuw here.
Face Recognition with inferred light
-
@feuerball, I meant, add more IR lights for the camera to “see” better at night.
-
ay, that might be a point, so i will have a Terminator on my wall :D
-
A series of them along the top frame won’t look too bad. Or, depending on where/how the camera is, you might be able to add a ring of IR LEDs around it too.
-
this is the ir light.
First i placed the cam in the middle of it; the problem is, that the IR reflects @ the mirror, so the camera was blind.
A wall of IR lights might be a way to do it
-
Yeah, if that didn’t work around the camera, then you’ll need to add them to the frame (or in front of the mirror essentially.)
-
Maybe something like this embedded in the frame?
http://amzn.com/B019QTDDH2 -
Saw this too :)
I think i will create a new frame with a larger monitor and a real mirror glas anyway so i gonna try to get more IR-Light into this.
The only doubt i got is the power consumption… Tons of IR-Lights = Tons of W/h :D
-
Problem solved! 80-100 METERS of illumination!
-
:D a bit too strong for a 4x1.5m corridor :D
-
This might work though, if you’re using either an rPi camera, or something similar. If you’re going to put the camera in the frame, you’ll be drilling a hole. Why not two more for the IR lights as well. And at 3W each, that’s mighty bright. http://amzn.com/B00ZEFIU6C
