MMM-AssistantMk2

teitlebot

@sean
ok. I tried searching for such problem but cant find anything either.
my MM is not up to date and im not using electron
maybe the problem will repeat by someone else.

Cr4z33

@teitlebot just out of curiosity what are you using then instead of Electron? :thinking_face:

citizendevpi

@Sean just wanted to thank you again for the module and making some of our magic mirror wishes come to life! great job

teitlebot

@cr4z33 I use node serveronly and open the browser. I had some electron error. Am I making any sense?

Cr4z33

@teitlebot oh OK.

reddyman

Thank you Sean/Eouia for all of your hard work, this is an absolutely amazing module!

I do have two small issues ever since two major updates ago (when commands were added). Sorry!

The first one is more significant. I can’t get the screen output to show unless the module is set to “top_right”. And when I do try to say something, it distorts the module above it (fig 3). A scroll bar also appears on the bottom of the screen output (fig 4). In addition, when I activate the voice command, all the modules on the top of the screen move down a few inches (1&2). They are all probably related to an issue with display size but I can’t figure out how to adjust it.

It sounds somewhat similar to @teitlebot’s second issue. Did anyone ever figure it out?

Fig 1: https://imgur.com/rNBMHEo
Fig 2: https://imgur.com/EyY3htC
Fig 3: https://imgur.com/0IC7pL9
Fig 4: https://imgur.com/txuHkce

My second issue is more minor. When I use the command HideAll, it works for several minutes, but then eventually the default current weather and weather forecast modules unhide themselves automatically. All other modules remain hidden, including newfeed. Any advice for this issue? Kinda stuck on where the issue is and how to address it.

A Former User

@reddyman
I can’t find exact reason, but It might seem CSS collision being happened with your other modules
add this into your css/custom.css

#ASSISTANT_SCREEN {
  width: 1000px;  // adjust for your screen resolution or your prefer values;
  height: 1000px;  // Here also.
}

For second issue; Are you using other module to control to hide and show modules? Maybe it makes to show specific module by force. There is no way to prevent force revealing by other module.

https://github.com/MichMich/MagicMirror/blob/master/modules/README.md#visibility-locking

A Former User

FIXED

In Italian language(or others), All results of Youtube Searching has no voice responses at all and that would interrupt YT playing; So I make a patch to ignore that error message. Now your YT won’t be interrupted.

A Former User

UPDATED

[2.1.2] - 2018.12.12

Fixed: Youtube playlist playing bug
Added:
- youtubePlayerVars
- youtubePlayQuality

citizendevpi

Updating c379637…3538008
error: Your local changes to the following files would be overwritten by merge:
MMM-AssistantMk2.js
Please commit your changes or stash them before you merge.
Aborting
how do i get past this?

A Former User

@citizendevpi
You may have modified the source by yourself.
Read the answer of https://stackoverflow.com/questions/14318234/how-do-i-ignore-an-error-on-git-pull-about-my-local-changes-would-be-overwritt
Or you just remove that file than retry.

citizendevpi

@sean thank you , yes i did set some preferences like my location and 8 sec response time which i reset after update thank you for your help(again)

A Former User

@citizendevpi
Oh, You don’t need to modify source itself. the everything you had to adjust for your environment should be done in config.js, not MMM-AssistantMk2.js. If you need more configuration options, tell me.

Arkitct

@Sean this is awesome module, thanks! I have been successful in getting it installed and working with Hotword - responds and provides answers including integrating with calendar, etc. (can make appointment).

But when I attempt to proceed with the instructions for “Register your Mirror as Google Assistant related device.” I am not sure what input to provide in the deviceInstance.json file for the YOUR_MODEL_ID. I have tried various permutations of what I think it is, but no luck.

The instructions indicate it comes from the Google Project Console. Is this the Google Cloud Platform? There is a Project Name and Project ID listed on the Cloud Platform; are one of these the YOUR_MODEL_ID?

Thanks!

A Former User

@arkitct
You’ve already made deviceModelId when you mad your credentials.json on first installation. (https://github.com/eouia/MMM-AssistantMk2/blob/master/INSTALL.md#get-auth-and-credentials-to-make-profile)
If you have forgotten your deviceModelId,
Go to Google Action console homepage(https://console.actions.google.com) Then find your project and the menu - Device Registration

Of course, there are other methods to get Model Id (If you have a plan to get deviceInstanceId also, you need to use CLI. - See https://developers.google.com/assistant/sdk/reference/device-registration/register-device-manual

A Former User

@arkitct
But… many features are restricted in this SDK, So I think you don’t need to register Mirror to your Google Home network. Even though your mirror registered on your phone looks very nice, but that’s all. :D

Jmh474

Sorry this is my first post, are there any guides for helping me install the MMM-assistantMK2 I’m a total beginner With the raspberry pi any help would be much appreciated

Cr4z33

@jmh474 Follow the link in the first post that bring you to GitHub.
Once there follow CAREFULLY the step-by-step installation & configuration.

Only then if there’s still anything not clear or not working ask here. ;)

Jmh474

@cr4z33 OK thanks mate

reddyman

For second issue; Are you using other module to control to hide and show modules? Maybe it makes to show specific module by force. There is no way to prevent force revealing by other module.

https://github.com/MichMich/MagicMirror/blob/master/modules/README.md#visibility-locking

No luck here, I ended up doing a fresh install with no other modules installed and it still happens. Can’t figure why it only applies to the default weather app, even if I move the position.

I can’t figure out why no one else has this issue. Oh well, I guess I can just not use the “hide all” command though. Thanks!