ipwhitelist - a lot of issues... can't connect remotely ..

[Big11]

Some days now, i try to get my MM running on a Raspberry (Zero, B3A+) but without Access

two main issues occurs…

i can’t access remotly …

whatever i tried in “config.js”

this is what i tried

var config = {
address: “localhost”, // Address to listen on, can be:
// - “localhost”, “127.0.0.1”, “::1” to listen on loopback interface
// - another specific IPv4/6 to listen on a specific interface
// - “”, “0.0.0.0”, “::” to listen on any interface
// Default, when address config is left out, is “localhost”
port: 8080,
ipwhitelist: [],
//ipWhitelist: [“::fff:0.0.0.0/1”, “::fff:0.8.0.0/1”, “::fff:128.0.0.0/2”, “::fff:192.0.0.0/3”, “::fff:224.0.0.0/4”, “127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “192.168.2.54”],
//ipWhitelist: [“::ffff:192.168.2.1/120”, “127.0.0.1”, “::ffff:127.0.0.1”, “::1”], // Set [] to allow all IP addresses
// or add a specific IPv4 of 192.168.1.5 :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.1.5”],
// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.3.0/28”],

for Explanation my Home LAN is addressed with 192.168.2.x…

i have installed it with PM2

if i start it locally with

startx (cause “chromium-browser -Kiosk http://localhost:8080” gives an GTK-Error) and after that
DISPLAY=:0 chromium-browser -Kiosk http://localhost:8080" it starts but give me an Warn Message that Address “localhost” is already in use …

any Ideas…

The last entrys for “ipwhitelist” i found were form one year ago…

basicliy i want to start it jast locally on my Pi …

[Plati]

@big11 said in ipwhitelist - a lot of issues... can't connect remotely ..:

address: “localhost”,

Try change address: “localhost” to “0.0.0.0”

[bhepler]

And please use the Markdown features of the board when pasting code or logs.

[Big11]

@plati

got it … thank you…

but the ipwhitelist Parameter are not very handsome

so i did a

ipwhitelist: [],

and that works…

further i will look for the correct Syntax to grant Access for Special addresses outside my LAN…