mm-pir-hide-all

Atheose

@phrazelle As someone who is having trouble with the MMM-PIR-Sensor module, this is a lifesaver! Going to give it a try today.

Thanks @phrazelle!

Nususu

Great addition to the PIR-Sensor module. I’ve got it working on my mirror, but the only issue is that when the sensor detects movement, the screen only stays active for about a second, then goes to sleep again. Is there a line in your code that I could modify so that when movement is detected, the mirror stays on for a set duration (maybe 4 minutes)? I’ve been looking at the code but I’m new to this so I don’t really know where to start.

lolobyte

@Nususu

I think this is not a software problem.

On your Sensor are two variable resistors.

One for the sensitivity and one for the delay time.

Take a screwdriver and adjust the delay time.

Nususu

@lolobyte thanks for your reply. I am actually not using a PIR sensor, but a microwave radar sensor as I wanted to put the sensor behind the glass. After looking into it, I found that I can install a resistor on the sensor to set delay to 30 seconds.

https://www.amazon.com/gp/aw/d/B01JA7K2EM/ref=mp_s_a_1_7?ie=UTF8&qid=1485446060&sr=8-7&pi=AC_SX236_SY340_QL65&keywords=microwave+sensor&dpPl=1&dpID=51f4ntKudYL&ref=plSrch

If I want more than 30 seconds, would placing a higher resistance resistor on it work?

lolobyte

@Nususu
Wow, nice.
Please send me all your information what you have because i want to build and test it by my mirror.

phrazelle

Agreed, I think altering the delay on the sensor would fix the issue.

That being said, the microwave radar sensor sounds awesome! I’d like to see it in action as well.

Oliver_Tooth

Hi,

I’m struggling to get this working, i’m just receiving a black screen that doesn’t want to exit. I’ve tested the PIR sensor with a simple python script and it works fine, i’m just having trouble getting it to integrate with the mirror. Any advice?

magicR

Hi,
I did some changes because of the fading-effect.
All Modules fades now In and Out correctly.
Here is my repo: https://github.com/s72817/MMM-PIR-Fade-HIDE

Greetings

coltography

@magicr how do I implement your repo to get the fade working? Do I add it in as another module or merge your files within the mm-pir-hide-all module? I can’t get it working

magicR

@coltography sorry for the late answer :/
You need the MMM-PIR-Sensor Module.
A config example:
{
module: “MMM-PIR-Sensor”,
config: {
sensorPin: 23,
powerSaving: false
}
},
{
module: “MMM-PIR-Fade-HIDE”,
position: “fullscreen_below”,
config: {
fadeInTime: 1000,
fadeOutTime: 3000,
}
},

cheers Richard

sdetweil

@coltography the hide() api, takes an optional amount of time

search ‘hide’ in the development doc
https://github.com/MichMich/MagicMirror/tree/master/modules

this.hide(speed, callback, options)

dvbit

@Nususu hi i have a microwave sensor too is the resistance mod needed? I do not want to reopen the mirror…

majik655

@magicR Wondering if you can help me…
I have implemented your module on my magic mirror with PIR sensor.

The issue I seem to have with ALL hiding modules is it seems the PIR is initiating BOTH hiding AND unhiding.

I just can not seem to figure out what is going on. I can adjust the delay and sensitivity if I need to on the sensor but I dont think I need to mess with that at this moment…

I really just want the mirror to be on… say for 20 minutes… then if no trigger … hide.
Then turn on when triggered and stay on for 20 minutes… rinse and repeat.

Can you help me ?

My config is below:

                {
                        module: 'MMM-PIR-Sensor',
                        config: {
                        sensorPin: '22',
                        powerSaving: false,
                        }
                },
                        {
                module: "mm-pir-hide-all",
                position: "fullscreen_below",
                config: {
                        fadeInTime: '1000',
                        fadeOutTime: '300000',
                        }
                },