The latest Install Guide (MM w/ Google Assistant)

numb3rs

Wow this is a great tutorial, and video. I am going to add this to my mirror. Can I ask where you got your USB mic and speaker combo from?

I especially liked how you showed the troubleshooting, and corrections in your video. So many people edit out the hurdles. Kudos to you my friend! A++

leej00

Thank you for the elaborate instructions, everything for me went well until I’ve noticed that the default modules (calendar, complements, news feed) seem to disappear after some time. Did you run into similar issues?

bachoo786

@leej00 hello mate

how did you configure the last part i.e.

STEP7. EDIT GOOGLE ASSISTANT MODULE CONFIG
Open the Magic Mirror configuration file with TextEditor and modify it with the contents of github

there is soo much information on github that needs to be added on to the config.js, which part of it did you add to your config.js? can you please share it?

I get the google icon on my mm but when I say “Ok Google” nothing happens"

Thanks.

numb3rs

A few things you can do:

Add your location inside the config.js under the module call. You can find this info inside the CONFIGURATION.md
i.e.
// — ESSENTIALS / modifying for your environment might be needed.

Use: https://www.mapdevelopers.com/geocode_tool.php

deviceLocation: {
  coordinates: { // set the latitude and longitude of the device to get localized information like weather or time. (ref. mygeoposition.com)
    latitude: 00.0, // -90.0 - +90.0
    longitude: -00.00, // -180.0 - +180.0
  },
},

With MMM-Hotword, using USB mic (plughw:1) you need to use the following:

//Hotword Module
{
    module: "MMM-Hotword",
    config: {
      record: {
        recordProgram : "arecord",  
        device        : "plughw:1",
      },
      autostart:true,
      onDetected: {
        notification: function (payload) {
          return "ASSISTANT_ACTIVATE"
        },
        payload: function (payload){
          return {
            profile: payload.hotword
          }
        }
      },
    },
  },
{
		module: "MMM-AssistantMk2",
		position: "bottom_bar",
		config: {
		record: {
        recordProgram : "arecord",  
        device        : "plughw:1",
      },

      notifications: {
        ASSISTANT_ACTIVATED: "HOTWORD_PAUSE",
        ASSISTANT_DEACTIVATED: "HOTWORD_RESUME",
      },
deviceLocation: {
      coordinates: { // set the latitude and longitude of the device to get localized information like weather or time. (ref. mygeoposition.com)
        latitude: 00.00, // -90.0 - +90.0
        longitude: -00.00, // -180.0 - +180.0
      },
    },
                
}
},

It works. Thank You! I am using the PS Eye as suggested in other forms. My audio out is still set to HDMI because im staging on my TV.

LPT: Add the following to the MK2 module config so the screens dont toggle so fast:

screenDuration: 5000, //this is milliseconds

numb3rs

@leej00
Testing this now to see if I get the same results.

@makepluscode
Can confirm all modules disappear besides the default weather module.

I have a YouTube playlist playing, and I can still hear the module playing through the speakers, but visually it is no longer there.

If I give it a keyword voice command it is listening for it will draw the modules again.

Another observation is every time I give it a voice command it starts my playlist from the top.

numb3rs

@bachoo786 say “smart mirror” or “snowboy”

You can also read more on the .umdl and how to obtain a custom .umdl here:
snowboy.kitt.ai

More particularly:
http://docs.kitt.ai/snowboy/#api-v1-train

Jmh474

This post is deleted!

Fabian

@makepluscode
Hello first of all thanks for the great tutorial!
Unfortunately I’m stuck with the last step (installation of the microphone)
When I enter the command “vi ~/.asoundrc” I get the following message:
0_1552146497267_IMG_1216(2).JPG

I ask for help
Greeting Fabian

Sahil

@Fabian
Type sudo nano. asoundrc in command prompt
Then paste your code there.
To save that code press ctrl+X, then Y and then enter.
You are good to go

dxfan227

So In Your Opinion is MMM Hotword and MMM-assistankmk2 the best combo for google assistant?

I see a few other modules like MMM-GoogleAssistant out there too

siddhartha

pcm.!default {
type asym
capture.pcm “mic”
playback.pcm “speaker”
}
pcm.mic {
type plug
slave {
pcm “hw:1,0”
}
}
pcm.speaker {
type plug
slave {
pcm “hw:0,1”
}
}

This is my asoundrc conf but i want to change conf like this

defaults.pcm.!card
defaults.ctl.!card

screencast and google assistant both want diffrent asoundrc so any suggetions ??

Thank you.

i am noob at this so sorry in advance for dumb question…

Thank you for your reply 🙂

otto

This post is deleted!

otto

@makepluscode
https://pastebin.com/cBFMG7ak

i got this… what sholde i do?

harrycool25

An amazing guide! Thanks a lot. Got the mirror and the google assistant module up an running well, with a few issues that I will address here.
So, overall, everything is VERRY LAGGY- from audio, video, animation and update rate. I was told to downgrade MM from 2.9.0 down to 2.1.0, but have no idea how. Any help please. And the google assistant, when asked about some specific things like direction or information on the web, it just shows the URL for like a split second, then stop. Anyway I can display this on my phone, like idk connect the module to my phone in any way?
Please help. I’ve been struggling with this for 4 weeks already and it’s starting to br a major annoyance :(

Ayos53

Excuse me but i have a problem in your tutoriel : step 5 point 1.
when you ask to go :

cd ~/MagicMirror/modules/MMM-Hotword/node_modules/snowboy

I havent folder node module. When i “npm install” in MMM-hotword i have :

npm notice created a lockfile as package-lock.json. You should commit this file.
npm WARN MMM-Hotword@2.0.1 No repository field.

sdetweil

@Ayos53 said in The latest Install Guide (MM w/ Google Assistant):

I havent folder node module.

its node_modules (note the trailing s)…

it will be there if you ran npm install in the MMM-Hotword folder as required by the install instructions (the install.sh script does this)

Ayos53

Sorry it’s me again.

I have a problem when i launch magicmiror, he crashed.
The log file :

0 info it worked if it ends with ok
1 warn npm npm does not support Node.js v10.15.2
2 warn npm You should probably upgrade to a newer version of node as we
3 warn npm can't make any promises that npm will work with this version.
4 warn npm Supported releases of Node.js are the latest release of 4, 6, 7, 8, 9.
5 warn npm You can find the latest version at https://nodejs.org/
6 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'start' ]
7 info using npm@5.8.0
8 info using node@v10.15.2
9 verbose run-script [ 'prestart', 'start', 'poststart' ]
10 info lifecycle magicmirror@2.9.0~prestart: magicmirror@2.9.0
11 info lifecycle magicmirror@2.9.0~start: magicmirror@2.9.0
12 verbose lifecycle magicmirror@2.9.0~start: unsafe-perm in lifecycle true
13 verbose lifecycle magicmirror@2.9.0~start: PATH: /usr/share/npm/node_modules/npm-lifecycle/node-gyp-bin:/home/pi/MagicMirror/node_modules/.bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
14 verbose lifecycle magicmirror@2.9.0~start: CWD: /home/pi/MagicMirror
15 silly lifecycle magicmirror@2.9.0~start: Args: [ '-c', 'sh run-start.sh' ]
16 info lifecycle magicmirror@2.9.0~start: Failed to exec start script
17 verbose stack Error: magicmirror@2.9.0 start: `sh run-start.sh`
17 verbose stack spawn ENOENT
17 verbose stack     at ChildProcess.<anonymous> (/usr/share/npm/node_modules/npm-lifecycle/lib/spawn.js:48:18)
17 verbose stack     at ChildProcess.emit (events.js:189:13)
17 verbose stack     at maybeClose (internal/child_process.js:970:16)
17 verbose stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
18 verbose pkgid magicmirror@2.9.0
19 verbose cwd /home/pi/MagicMirror
20 verbose Linux 4.19.75-v7l+
21 verbose argv "/usr/bin/node" "/usr/bin/npm" "start"
22 verbose node v10.15.2
23 verbose npm  v5.8.0
24 error file sh
25 error code ELIFECYCLE
26 error errno ENOENT
27 error syscall spawn
28 error magicmirror@2.9.0 start: `sh run-start.sh`
28 error spawn ENOENT
29 error Failed at the magicmirror@2.9.0 start script.
29 error This is probably not a problem with npm. There is likely additional logging output above.
30 verbose exit [ 1, true ]

If someone have an idea ?

sdetweil

@Ayos53 said in The latest Install Guide (MM w/ Google Assistant):

/home/pi/MagicMirror

seems a file is missing, please do

ls /home/pi/MagicMirror/run-start.sh

you should see this result

pi@raspberrypi:~ $ ls /home/pi/MagicMirror/run-start.sh
/home/pi/MagicMirror/run-start.sh

it is part of the git clone distribution and never changed

Ayos53

@sdetweil
i do

ls /home/pi/MagicMirror/run-start.sh

and yes i have this result

pi@raspberrypi:~ $ ls /home/pi/MagicMirror/run-start.sh
/home/pi/MagicMirror/run-start.sh

but always crash after 1 seconde

i see this :

> magicmirror@2.9.0 start /home/pi/MagicMirror
> sh run-start.sh

Starting MagicMirror: v2.9.0
Loading config ...
Loading module helpers ...
No helper found for module: alert.
Initializing new module helper ...
Module helper loaded: updatenotification
No helper found for module: clock.
No helper found for module: currentweather.
No helper found for module: weatherforecast.
Initializing new module helper ...
Module helper loaded: newsfeed
Initializing new module helper ...
Module helper loaded: MMM-NetworkConnection
Initializing new module helper ...
Module helper loaded: MMM-Hotword
Initializing new module helper ...
Module helper loaded: MMM-AssistantMk2
All module helpers loaded.
Starting server on port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Connecting socket for: newsfeed
Starting module: newsfeed
Connecting socket for: MMM-NetworkConnection
MMM-NetworkConnection helper started ...
Connecting socket for: MMM-Hotword
[HOTWORD] MMM-Hotword starts
Connecting socket for: MMM-AssistantMk2
Sockets connected & modules started ...
Launching application.
Create new news fetcher for url: https://www.francetvinfo.fr/titres.rss - Interval: 300000
[AMK2] Recipe is loaded: hide_and_show_all_modules.js
[AMK2] Recipe is loaded: reboot.js
[AMK2] Recipe is loaded: screen_onoff.js
[AMK2] Recipe is loaded: shutdown.js
[HOTWORD] No model to load
[AMK2] Temporal storage directory is clearing.
[AMK2] assistant ready
/home/pi/MagicMirror/node_modules/electron/dist/electron js/electron.js: symbol lookup error: /home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/grpc/src/node/extension_binary/electron-v3.0-linux-arm-glibc/grpc_node.node: undefined symbol: __atomic_store_8
npm ERR! file sh
npm ERR! code ELIFECYCLE
npm ERR! errno ENOENT
npm ERR! syscall spawn
npm ERR! magicmirror@2.9.0 start: `sh run-start.sh`
npm ERR! spawn ENOENT
npm ERR! 
npm ERR! Failed at the magicmirror@2.9.0 start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2019-12-04T14_51_36_364Z-debug.log

sdetweil

@Ayos53 said in The latest Install Guide (MM w/ Google Assistant):

home/pi/MagicMirror/node_modules/electron/dist/electron js/electron.js: symbol lookup error: /home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/grpc/src/node/extension_binary/electron-v3.0-linux-arm-glibc/grpc_node.node: undefined symbol: __atomic_store_8

that is the error

this is a known problem, one of the services the module depends on has a bug,

@Sean will need to give the answer, as I don’t see a specific set of steps to resolve it

the ‘fix’ is to downgrade the grpc module to version 1.23 (from 1.24 u are on now)