Where to buy good two way mirrors ?

[Try2Fly]

@Mark I do think that a real glass mirror is better than the plexiglas. But that costs more, and for me this is now only a test and see where the project goes. If I am satisfied with the way MM is working and still find it usefull/fun, I might consider buying a glass mirror and building a nicer frame…

[Mark]

@Try2Fly I tested with the adhesive film, and I am going to try the plexiglas 50x70 cm.
Let me know, if you have a cheap adres for the glass version.

[rockja]

@michelleoj Just went onto their site and the price quote for a 24" x 36" acrylic is $270. Am I missing something or have they jacked up their prices from when you bought yours?

[andy952]

@Mitchfarino Cutplasticsheeting is the company I used for my acrylic mirror.
It does the job, at a fraction of the cost! Yes it may scratch over time, but for £30 for a 22" I can’t really complain at that!

[Mitchfarino]

@andy952 awesome!

I’m going to go with them then, just wanted to make sure the two way worked well enough.

Thanks for your feedback!

[patm189]

Hi @andy952 , I’m looking at Cutplasticsheeting now. Do you mind sharing what type of Material and Thickness you used? It seems there are many different kinds. I’m not too handy with acrylic lingo and want to make sure I order the proper sheet. Thanks in advance!

[Petal0u]

Hi, i’m looking for a two Way mirror and i’ve not found any shop Which could ship in France.
Does anybody Know where i could order ?

[Alex]

@Petal0u

Hi,

I am also living in France and, for now, I did not find one. I asked to local shop but price was not very cheap. If you find one, I would be glad to hear about ! :)

Thanks

Alex

[Mitchfarino]

@evos how big is the acrylic?

I’ve seen on larger sizes the image reflected becomes distorted

[bibi]

@Bangee Hi! did you ordered your mirror from this company finally? do you recommand? with which specs did you ordered?

[Bangee]

I’ve ordered there different pices of mirrors. 12%, 4mm and 20%.

[bibi]

@Bangee thx for reply. which specs your recommand? i will call them tmrw :)

[bibi]

@bibi by the way i will use a 24" monitor. It would be very nice if you can advise me the size and best mirror specs to place my order :)

[Bangee]

https://forum.magicmirror.builders/topic/117/bangee-s-mirror/16

This one is also built with a 24" Monitor and a 12 %, 4mm Mirror.
I would recommend this one.

[bibi]

@Bangee Thx you very much! - your help is much appriciated !

[bibi]

@Bangee By the way your are from Swiss i guess? you speak french tho?

[Bangee]

@bibi I wish I could, I understand a still a lot, but I don’t use it anymore…
I’m from the german part of Switzerland, close to Zurich.

[Mitchfarino]

I’ve just received the attached document regarding this acrylic - http://www.cutplasticsheeting.co.uk/mirrored-sheeting/two-way-acrylic-mirror

[bibi]

@Bangee hello, I called the company glastrosch but they told me that they don’t take orders from private people… only companies orders are valid. Did you get your one via a company or??

[Bangee]

I’ve made a privat order with the contact form on the right side: Here ->