new update/upgrade script, ready for testing

[sdetweil]

@bobwilliams fabulous!!

so the ‘problem’ was that there were modified files found…
you asked to save them, but the save command (stash) failed, because it needed some additional info
so the files weren’t merged, and then we reinstalled the currently downloaded version (2.8.0)
I didn’t detect that, i do now

so, when u have time, please retry the upgrade script.

 bash -c  "$(curl -sL https://www.dropbox.com/s/lxzwyzohg61sppu/upgrade-script.sh?dl=0)" apply

[bobwilliams]

thanks, I’ll try now

[bobwilliams]

a lot of mistakes and the mirror stopped showing

[sdetweil]

@bobwilliams can u send me the log ? same userid as here on gmail

[bobwilliams]

where to send? here does not let me write writes that spam

[sdetweil]

@bobwilliams my userid (sdetweil) at gmail (.com)

[bobwilliams]

@sdetweil sort of sent))))

[sdetweil]

@bobwilliams got it… looking…

[sdetweil]

@sdetweil can u show me the output of

uname -m

thanks
this appears to be a pi 0, correct?

[bobwilliams]

yes PI zero WH
pi@raspberrypi:~ $ uname -m
armv6l

[sdetweil]

@bobwilliams

ok, lets try this

cd ~/MagicMirror
npm install --arch=armv71 electron@3.0.13 | tee -a ~/MagicMirror/installers/upgrade.log

[bobwilliams]

ok it started … in my opinion this is a long process

[sdetweil]

@bobwilliams yes, but only 5 minutes

[bobwilliams]

but no, it seems to have accelerated … at first he thought for a long time for some reason

[bobwilliams]

sent by mail
mistakes again

[sdetweil]

@bobwilliams yes, I see… working

[sdetweil]

@sdetweil weird…

ok, my fault… number 1 and l (lowercase letter L ) looks close to the same
lets try again

cd ~/MagicMirror
npm install --arch=armv7l electron@3.0.13 | tee -a ~/MagicMirror/installers/upgrade.log

notice the 7l the char after 7 is taller than the number
and with number 71 it is not taller

[bobwilliams]

Yes, I also did not pay attention

[sdetweil]

@bobwilliams you shouldn’t have to!.. there is arm6 L and B (lowercase) and arm7 L and B (lowercase)

there is no arm 7 1… and the darned download website agrees!!

but my upgrade script used number, instead of letter… (and there is no electron 3.013 for arm6 L), but there IS for arm7 L
and my 1st instructions to you used number instead of letter…

[bobwilliams]

pi@raspberrypi:~/MagicMirror $ npm install --arch=armv7l electron@3.0.13 | tee -a ~/MagicMirror/installers/upgrade.log

electron@3.0.13 postinstall /home/pi/MagicMirror/node_modules/electron
node install.js

Downloading tmp-13770-1-SHASUMS256.txt-3.0.13
[============================================>] 100.0% of 4.79 kB (4.79 kB/s)
npm WARN acorn-jsx@5.0.2 requires a peer of acorn@^6.0.0 || ^7.0.0 but none is installed. You must install peer dependencies yourself.
npm WARN grunt-stylelint@0.11.1 requires a peer of stylelint@^10.0.0 but none is installed. You must install peer dependencies yourself.

• electron@3.0.13
  added 5 packages from 6 contributors and audited 3475 packages in 652.83s
  found 28 vulnerabilities (1 low, 1 moderate, 26 high)
  run npm audit fix to fix them, or npm audit for details
  pi@raspberrypi:~/MagicMirror $