new update/upgrade script, ready for testing

[sdetweil]

@bobwilliams

ok, lets try this

cd ~/MagicMirror
npm install --arch=armv71 electron@3.0.13 | tee -a ~/MagicMirror/installers/upgrade.log

[bobwilliams]

ok it started … in my opinion this is a long process

[sdetweil]

@bobwilliams yes, but only 5 minutes

[bobwilliams]

but no, it seems to have accelerated … at first he thought for a long time for some reason

[bobwilliams]

sent by mail
mistakes again

[sdetweil]

@bobwilliams yes, I see… working

[sdetweil]

@sdetweil weird…

ok, my fault… number 1 and l (lowercase letter L ) looks close to the same
lets try again

cd ~/MagicMirror
npm install --arch=armv7l electron@3.0.13 | tee -a ~/MagicMirror/installers/upgrade.log

notice the 7l the char after 7 is taller than the number
and with number 71 it is not taller

[bobwilliams]

Yes, I also did not pay attention

[sdetweil]

@bobwilliams you shouldn’t have to!.. there is arm6 L and B (lowercase) and arm7 L and B (lowercase)

there is no arm 7 1… and the darned download website agrees!!

but my upgrade script used number, instead of letter… (and there is no electron 3.013 for arm6 L), but there IS for arm7 L
and my 1st instructions to you used number instead of letter…

[bobwilliams]

pi@raspberrypi:~/MagicMirror $ npm install --arch=armv7l electron@3.0.13 | tee -a ~/MagicMirror/installers/upgrade.log

electron@3.0.13 postinstall /home/pi/MagicMirror/node_modules/electron
node install.js

Downloading tmp-13770-1-SHASUMS256.txt-3.0.13
[============================================>] 100.0% of 4.79 kB (4.79 kB/s)
npm WARN acorn-jsx@5.0.2 requires a peer of acorn@^6.0.0 || ^7.0.0 but none is installed. You must install peer dependencies yourself.
npm WARN grunt-stylelint@0.11.1 requires a peer of stylelint@^10.0.0 but none is installed. You must install peer dependencies yourself.

• electron@3.0.13
  added 5 packages from 6 contributors and audited 3475 packages in 652.83s
  found 28 vulnerabilities (1 low, 1 moderate, 26 high)
  run npm audit fix to fix them, or npm audit for details
  pi@raspberrypi:~/MagicMirror $

[sdetweil]

@bobwilliams woohoo!!!..

now try to start mirror

[bobwilliams]

this site can’t be reached
localhost refused to connect

[sdetweil]

@bobwilliams can I see your start script?

[bobwilliams]

Yes, where do I need to look for him? ))))

[sdetweil]

@bobwilliams how do you start mirror? pm2, or something else

if pm2, pm2 show 0, and there is a script path,

mine is /home/odroid/MagicMirror/installers/mm.sh

[sdetweil]

@sdetweil and if it is pm2, then show pm2 logs --lines=100
(will have to ctrl-c to get out)

[bobwilliams]

in mm.sh file
cd ~ / MagicMirror
DISPLAY =: 0 npm start

pi@raspberrypi:~ $ pm2 logs mm
[TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option)

did not quite understand how this is done

[sdetweil]

@bobwilliams ok… do

pm2 stop 0
then

cd ~/MagicMirror
npm start

you should get a bunch of messages

[bobwilliams]

pi@raspberrypi:~/MagicMirror $ npm start

magicmirror@2.9.0 start /home/pi/MagicMirror
sh run-start.sh

pi@raspberrypi:~/MagicMirror $

[sdetweil]

@bobwilliams ok, lets do the upgrade again , now that I fixed the parm…

bash -c  "$(curl -sL https://www.dropbox.com/s/lxzwyzohg61sppu/upgrade-script.sh?dl=0)" force

need force as u have 2.9.0 already, and we are gonna do it again