MMM-GrafanaCharts and MMM-GrafanaGauges: Display you data with Charts and Gauges. Beautifully.

[planet4]

@teitlebot I am using Home Assistant as well but Grafana is not used as an add-in on Hassio. I have it on a separate docker container. However I gave up Grafana in the end. It was to much problems. Now I use MQTT to get all information I want from Home Assistant to my Mirror. Like this:

http://www.planet4.se/magic-mirror-info-via-mqtt/

[teitlebot]

@planet4 What other problems did grafana give you? I am also using the mmm hass component to pull in sensor date but maybe I will switch to mmm mqtt. I really wanted to show some nice graph though. Also how did you build the total solar energy sensor saving in hass? I build it in graphana following someones tutorial,

[andreasm80]

edit reposted to be in same thread…

Hi,
Have been using this module for a couple of years now without any problems. Yesterday I upgraded my Grafana server and discovered they had implemented a security change where you had to allow_embedded=true. After doing this change I was back on track again, except that I can only see my GrafanaGauges when I point my browser to my MagicMirror IP, it does not show up on the MM screen itself. I see it takes it places and all modules around aligns perfectly around it, but the content onscreen is blank/black. Have been troubleshooting everything from both Grafana side and MagicMirror side. It will not show up on the screen only when I point my browser to the MM, then I see the screen with all content as it should…
Now I am clueless… Not sure if this is module-specific or content from Grafana that does it. My next step to try som iFrame modules to show the same content…
Any ideas?

Regards

[andreasm80]

edit
Case closed.
With no errors what so ever from the MM side, everything seemed to work normal. Either MM or the modules I tried did not resolve FQDN names… ! (MM is configured with two local DNS servers) I think this should be reported in some of the logs on MM… Nothing.
I figured it out when I did a lsof on my Grafana server and there were no connection from the MM there… Only my own pc… LOL

Well, back in business again after some hours troubleshooting… Probably learnt a thing or two also along the way.

I tried with another module capable of showing iframes. Same problem there. It refuses to show the content on the MM monitor only on a browser from another computer. There everythings shows up as normal.
Even removed all other modules sharing the same position as this one.

I am stuck…

[iorifly]

Hello, thanks for your module!

I would use the bar graph? Both vertical and horizontal?
it’s possible ? If not, do I want to add this function? Thanks so much again for the module!

[iorifly]

Does anyone know if anything happened to dev? I haven’t seen anything from him on the internet since 2018.

Is this project dead?

[Biebermann]

@iorifly
The project seems to be dead :(

[Egnos]

Hello everyone,
I would like to set up a system that takes the data from the temperature/humidity sensors, the values ​​recorded in a database and with Grafana graphing the values ​​and then displaying everything on MM.
What other methods/modules are available to graph this information on MM?
From what I understand @SvenSommer modules don’t work anymore …

Thanks

[thgmirror]

@Egnos You can use RDDTOOL, I described it here: https://forum.magicmirror.builders/topic/16575/cpu-temperature-as-a-graph-with-rrdtool?_=1666781012238
But instead of creating an extra html, you can use the output directly with MMM-EasyPix:

//#################################################################################
		{
			disabled: false,
			module: "MMM-EasyPix",
			position: "top_center",
			config: {
				picName: "cputemp.gif",      
				maxWidth: "100%",            
//				sounds: ["1.mp3", "me2.mp3"],
				updateInterval: 600000,      
				animationSpeed: 1000,
			}	
		},
//#################################################################################