Update MMM

mattx38

@sdetweil How can I acknowledge the update anyway (it will overwrite the two files) ?

sdetweil

@mattx38 it will not overwrite

U have to do the two commands I said before

mattx38

@mattx38 erase package-lock.json

Did u modify package.json?

And git checkout package.json to restore it if u are ok w that

Ok, I erased the package-lock.json file.
What command should I use to check package.json ?
I’m a beginner…

sdetweil

@mattx38 do

cd ~/MagicMirror
git checkout package.json

Stoffbeuteluwe

@sdetweil Perfect Sam thanks…

mattx38

@sdetweil said in Update MMM:

@mattx38 do

cd ~/MagicMirror
git checkout package.json

I did it but the command did not return any information.

sdetweil

@Stoffbeuteluwe you guys should really use my upgrade script

see here https://github.com/sdetweil/MagicMirror_scripts

mattx38

I did the “npm install”.
I fixed 2 moderate vulnerabilities and it still remains 8 low severity vulnerabilities.

I don’t get if this can have consequences or not.

sdetweil

@mattx38 don’t worry about the audit stuff… does it run?

mattx38

No, the mirror stays black with the mouse arrow in the left upper corner.
I did a reboot and a “pm2 restart mm”, but nothing works…

sdetweil

@mattx38
pm2 stop mm
cd ~/magicMirror
npm start dev
alt-spacebar, n to minimize MM,… any messages on the terminal window?
select the MM window to reopen, select the console, and scroll up to see if any errors…
there is a fatal one somewhere

mattx38

Yes there is an error in red :

[2020-04-01 22:06:21.797] [ERROR] WARNING! Could not load config file. Starting with default configuration. Error found: Error: The module ‘/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/build/Release/epoll.node’
was compiled against a different Node.js version using
NODE_MODULE_VERSION 64. This version of Node.js requires
NODE_MODULE_VERSION 73. Please try re-compiling or re-installing
the module (for instance, using npm rebuild or npm install).

and other errors still with PIR module, but the errors are written in white

EDIT : I try a “npm rebuild” ?

sdetweil

@mattx38 pir is a pain in the rear… I would disable it in config.js for now

add

disabled:true,

after module:“MMM-PIR-Sensor”,

mattx38

Done.

I did again a “npm start dev” and I have new errors written in red :

[2020-04-01 22:14:46.668] [ERROR] WARNING! Could not load config file. Starting with default configuration. Error found: Error: Cannot find module ‘/home/pi/MagicMirror/modules/MMM-Hotword/snowboy/lib/node/binding/Release/electron-v6.1-linux-arm/snowboy.node’
Require stack:

/home/pi/MagicMirror/modules/MMM-Hotword/snowboy/lib/node/index.js
/home/pi/MagicMirror/modules/MMM-Hotword/node_helper.js
/home/pi/MagicMirror/js/app.js
/home/pi/MagicMirror/js/electron.js
/home/pi/MagicMirror/node_modules/electron/dist/resources/default_app.asar/main.js

sdetweil

@mattx38 yep, snowboy is broke too… disable MMM-Hotword

mattx38

This update broke a lot of things… What a pain !

sdetweil

@mattx38 for hotword, from the hotword doc, try
in the MMm_Hotword folder

git clone https://github.com/Kitt-AI/snowboy.git
cd snowboy
rm -rf .git
cp -r resources/models ..
npm install -y nan node-pre-gyp
./node_modules/node-pre-gyp/bin/node-pre-gyp clean configure build
npm install -y
npm install -y electron-rebuild
./node_modules/.bin/electron-rebuild

its because electron changed versions… some modules are compiled at certain node and electron versions
if u change the versions (how would u know), then these modules break… Hotword and PIR are two such modules…

mattx38

Now it is the Jarvis Assitant :

[2020-04-01 22:22:29.776] [ERROR] WARNING! Could not load config file. Starting with default configuration. Error found: Error: Failed to load gRPC binary module because it was not installed for the current system
Expected directory: electron-v6.1-linux-arm-glibc
Found: [electron-v3.1-linux-arm-glibc, node-v64-linux-arm-glibc]
This problem can often be fixed by running “npm rebuild” on the current system
Original error: Cannot find module ‘/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/grpc/src/node/extension_binary/electron-v6.1-linux-arm-glibc/grpc_node.node’
Require stack:

/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/grpc/src/grpc_extension.js
/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/grpc/src/client_interceptors.js
/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/grpc/src/client.js
/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/grpc/index.js
/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/google-assistant/components/assistant.js
/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/google-assistant/index.js
/home/pi/MagicMirror/modules/MMM-AssistantMk2/components/assistant.js
/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_helper.js
/home/pi/MagicMirror/js/app.js
/home/pi/MagicMirror/js/electron.js
/home/pi/MagicMirror/node_modules/electron/dist/resources/default_app.asar/main.js

sdetweil

@mattx38 said in Update MMM:

MMM-AssistantMk2

yep assistant… same problem as hotword… incompatible binary versions

assistant doc

Then, you need to rebuild grpc module for electron of MagicMirror.

npm install --save-dev electron-rebuild
./node_modules/.bin/electron-rebuild

sdetweil

for pir-sensor try

cd ~/MagicMirror
npm install electron-rebuild
node_modules/.bin/electron-rebuild