Can't clone from GitHub

[MMRPi1]

@bhepler Oh yeah sorry, I did that and it worked fine, I got a bit of html

[sdetweil]

@MMRPi1 no… the second answer

Might be issue with gnutls Package. we have to compile a git Package with openssl instead of gnutls. Follow the below steps,

[MMRPi1]

@sdetweil That one shows up first for me. In any case I tried and it still doesn’t work

[sdetweil]

@MMRPi1 u recompiled the git with openssl?? then it should give the gnutils error

sudo apt-get install -y build-essential fakeroot dpkg-dev
sudo apt-get -y build-dep git
sudo apt-get install -y libcurl4-openssl-dev

mkdir git-openssl
cd git-openssl
apt-get source git
cd git-*
sed -i -e 's/libcurl4-gnutls-dev/libcurl4-openssl-dev/g' 
./debian/control
sed -i -- '/TEST\s*=\s*test/d' ./debian/rules
sudo dpkg-buildpackage -rfakeroot -b
sudo dpkg -i git_2.7.4-0ubuntu1.6_arm64.deb

#CleanUp
cd ../../
sudo rm -rf git-openssl
You can follow This Bog or You can find simple script here to do that

[MMRPi1]

@sdetweil I tried that and got gnutls_handshake() failed: Close notify
But that’s the same error as before :/

[sdetweil]

@MMRPi1 then you are not running the openssl git…

u may have to run the pi admin tool for software and updates to enable source download… I had to

[MMRPi1]

@sdetweil How do you do that?

[bhepler]

“gnutls_handshake() failed: Close notify”… I’m sorry, I don’t understand this. Can you type out the exact error that you’re seeing? Including all the text after “failed”.

[MMRPi1]

@bhepler fatal: unable to access: gnutls_handshake() failed: Close notify

[sdetweil]

the build process above doesn’t work. too old

[sdetweil]

@bhepler but he can git clone from windows on the same local network.

almost like an install failure or an sd card starting to fail.

[bhepler]

@sdetweil - Yeah, this is all kinds of weird. He’s using what appears to be a consumer grade network router. He shouldn’t have to mess with proxy settings as he should just be behind the NAT functions. And even if he was, it should also affect his Windows installation.

Let’s try to reinstall git one more time, if you please:

sudo apt remove git --purge
sudo apt install git

[sdetweil]

@bhepler I don’t think its a git problem… I think its a library problem

[bhepler]

@sdetweil - Yeah, at this point it may be easier to just back up the config.jsfile and reflash the SD card.

[MMRPi1]

@bhepler Didn’t work

[MMRPi1]

@bhepler I’d very much prefer it doesn’t come to that. I’m on a Pi 1 and I had enough (too much) trouble setting up MM in the first place (since its not officially supported), I’m kinda paranoid it won’t work this time around

[sdetweil]

@MMRPi1 use my installer script

see here https://github.com/sdetweil/MagicMirror_scripts
read the readme for the command to issue

[MMRPi1]

@sdetweil that to update?

[bhepler]

@MMRPi1 - He has an installation script too. Use that one instead. It’s quite robust.

If you’re really paranoid about losing your data, you can make an image of your SD card before reflashing it. If anything goes wrong, you can just flash that image back onto the card.

The downside is that it’s going to take a fair amount of time to install Magic Mirror again. But I think at this point it’s going to be faster this way than to keep banging our heads against this TLS error.

[sdetweil]

@MMRPi1 no. install

my stuff does ONLY MagicMirror related work

so create a new sd card, get it all working, ssh, whatever

and check that git clone works (U can get this repo), just don’t use it after download

then ssh in and execute the MM install script command