Hello-Lucy Module Microphone not working

[Linas123]

@Mykle1

{
disabled: false,
module: "Hello-Lucy",
position: "top_center",
config: {
    keyword: 'HELLO LUCY',              // keyword to activate listening for a command/sentence
    timeout: 15,                        // timeout listening for a command/sentence
    standByMethod: 'DPMS',              // 'DPMS' = anything else than RPi or 'PI'
    microphone: "2,0",                  // run "arecord -l" card # and device # mine is "0,0"
    sounds: ["1.mp3", "11.mp3"],        // welcome sound at startup. Add several for a random greetings
    confirmationSound: "ding.mp3",      // name and extension of sound file
    startHideAll: false,                 // All modules start as hidden EXCEPT PAGE ONE
    // *** Page One is your default startup page *** This overrides startHideAll: true,
    pageOneModules: ["Hello-Lucy", ],                     // default modules to show on page one/startup
    pageTwoModules: ["Hello-Lucy",], // modules to show on page two
    pageThreeModules: ["Hello-Lucy",],                 // modules to show on page three
    pageFourModules: ["Hello-Lucy", ],                  // modules to show on page four
    pageFiveModules: ["Hello-Lucy", ],               // modules to show on page five
    pageSixModules: ["Hello-Lucy", ],                      // modules to show on page six
    pageSevenModules: ["Hello-Lucy", ],                   // modules to show on page seven
    pageEightModules: ["Hello-Lucy", ],                   // modules to show on page eight
    pageNineModules: ["Hello-Lucy", ],                   // modules to show on page nine
    pageTenModules: ["Hello-Lucy", ]             // modules to show on page ten
    }
},

I don’t know what else I can do.

[Mykle1]

@Linas123

You tried to run it? What was the result?

If you run arecord test.wav in a terminal window does it record a sound file?

[Mykle1]

@Linas123

Your config entry is fine. I just tried it with my microphone setting and it works fine

[Linas123]

Yes I tried it to run, but lucy say only “Hello Michael, what would you like to see” and on the top of the Mirror is a crossed-out green flashing microphone and “Command Please:”.

[Mykle1]

@Linas123

OK, the module is loading. That’s good.

If you run arecord test.wav in a terminal window does it record a sound file?

[Linas123]

@Mykle1 said in Hello-Lucy Module Microphone not working:

arecord test.wav

No it doesn’t work , there is yet the error “arecord: main:828:…”. I just noticed that my USB micro is now suddenly displayed as card 1. I change yet my /.asoundrc file again. Do I have to download the module again?

Thank you for you fast replays.

[Mykle1]

@Linas123

arecord test.wav MUST work for Lucy to work.

If you can get that to work then run arecord -l again to get your card and device numbers,

Then enter those in the microphone config entry and run MM again

[Mykle1]

@Mykle1

You do NOT have to download the module again

[Linas123]

@Mykle1

It’s still the same as earlier. At the top is still the crossed-out green flashing microphone.

[Mykle1]

@Linas123

Did you get arecord test.wav to record a sound file?

I just noticed that my USB micro is now suddenly displayed as card 1.

I’m confused. Is it still reporting card 1?

Did you make the changes to your config microphone option?

How long are you waiting before quitting MM when you see thecrossed-out green flashing microphone?