Installing on a Pi Zero

[RushHour99]

@sdetweil Thanks! It is much more clear now. My screen size truncated the “apply” parameter at the end of the line. Now that I scroll horizontally I see the “apply”. Thanks again for the feedback.

[sdetweil]

@RushHour99 as folks have invested a lot of time in setting up their systems, only to have an update crash everything,
I wanted to provide a ‘test’ 1st, so people might be more comfortable with what might be impacted…
and NOT make changes if they don’t want to continue…

all my work suffers from problems in the base that is being applied, like some new translation file comments for years old modules this time…

[akz_g]

@sdetweil said in Installing on a Pi Zero:

@akz_g use my script. the old instructions don’t work anymore

see here
https://github.com/sdetweil/MagicMirror_scripts

Thanks for this @sdetweil I will try with a fresh image. Do I just run master/raspberry.sh… ?

Going to try it tonight! many thanks

[sdetweil]

@akz_g no… the script is not in the base anymore … run it directly from here

https://github.com/sdetweil/MagicMirror_scripts

it does everything, prep the system, download the code, install the dependencies, add support for pi 0,
add support for starting at boot, turn off screen saver

[akz_g]

@sdetweil Thanks again! will let you know how I get on :)

[akz_g]

@akz_g first message I got was

this appears not to be a Raspberry Pi 2, 3 or 4, do you want to continue installation (y/N)?

should I continue? don’t want to waste another hour if i’m doing it wrong.

[sdetweil]

@akz_g no, keep going

[akz_g]

@sdetweil Thanks so much! got it working and it was a very easy install in the end. My next step is to have a look at the config.js file and tailor it to UK etc… I guess this is the place I can add new modules also?

[sdetweil]

@akz_g yes, see the links in my signature for learning

[eracerhead]

@andyc7687 I know this is almost 2 years later, but this did not work on the pi zero w. I got to the point of on page 18 where it was supposed to say MagicMirror running. But it never did. It did say it was installed correctly, and to reboot, which I did, but it isn’t working.

$ pm2 show MagicMirror
[PM2][WARN] MagicMirror doesn’t exist

I don’t even know how to begin to troubleshoot this. (This was my second attempt at trying to install magic mirror.)