MMM-Strava Auth Fail

[lavolp3]

@lavolp3 If I remember correctly:
If you’re trying to auth from your mac’s browser using the pi as the mirror you should use the Pi’s IP address as callback URL. NOT “localhost”.
You need to use a valid address you can enter from your mac or laptop.

http://192.168.1.23:8080/MMM-Strava/auth

This one works if you also use http://192.168.1.23:8080 as callback URL for the authentication.

[huso15]

@lavolp3 Thank you for the reply.

I’m running MagicMirror on PI. I’m using SSH on Mac’s terminal to access PI. The Strava Auth I’m trying to run through Safari on my Mac by using PI’s IP: 192.168.1.23 - but, it doesn’t work. I’m still getting Failed to Open Page.

I’ve tried 192.168.1.23, localhost, and even 192.168.1.23:8080 as Authorization Local Callback Domain, but still nothing.

No idea how to proceed or what I’m doing wrong here.

[huso15]

Anyone that can help with this issue?

[mumblebaj]

@huso15 Hi. You need to add the config to the config.js and start MM. Then run http://192.168.1.23:8080/MMM-Strava/auth in a browser. This should then open the auth page to Strava. Hope this helps.

[MaXi-XCeL]

Your config.js should also allow listen on for 192.168.1.23. By default it is set to “localhost” only.

There is also a “ipWhitelist” which should reflect the ip address of your Mac and your PI.

Here’s my config.js relevant to listen on and ipWhitelist

var config = {
	address: "0.0.0.0", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1", "192.168.178.73", "192.168.178.76"], 	// Set [] to allow all IP addresses
					// or add a specific IPv4 of 192.168.1.5 :
					// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
					// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

And here’s my Strava module in “config.js”

	    {
				module: "MMM-Strava",
				position: "bottom_right",
				header: "Strava",
				config: {
					client_id: "12345",
					client_secret: "123456789012345678901234567890",
					mode: "chart",
					chartType: "bar",
					activities: ["run"],
					stats: ["count", "distance", "elapsed_time", "achievements"],
					period: "recent",
					units: "metric",
				}
		},

If you’ve downloaded the Strava module and add it to your config together with the listen on and ipWhitelist you should be able to successfully register and use the module.

Good luck!
David

[acdacd2]

@maxi-xcel hello,

I get this message “Cannot GET /MMM-Strava/auth” whith the page request.

Any idea ?

Thanks,

marc,

[acdacd2]

@acdacd2 solved

[BerkSmash1984]

@MaXi-XCeL Hello, I am getting client id not authorized, despite having my client ID and client secret correct (from Strava API page). I also have the whitelist setup correctly and can access my MM from my local browser (the MM itself is on a RPI4). I receive the link within the magic mirror and am redirected to the authorization page on Strava, but after clicking authorize and restarting MM, I am still getting the same client ID not authorized. Any help would be greatly appreciated. Thanks!