Auto Black Screen (save mode of monitor?) after a few minutes

[PeterPang]

Auto Black Screen (save mode of monitor?) after a few minutes , already change to
#xserver-command=X -s 0 -dpms ,
but still BLACK again & again

[Seat:*]
#type=local
#pam-service=lightdm
#pam-autologin-service=lightdm-autologin
#pam-greeter-service=lightdm-greeter
#xserver-backend=
#xserver-command=X -s 0 -dpms
#xmir-command=Xmir
#xserver-config=
#xserver-layout=
#xserver-allow-tcp=false

[wishmaster270]

@peterpang Hi,
sdetweil wrote a script which can be used to disable the screensaver. You may look at GitHub.

[PeterPang]

@wishmaster270 said in Auto Black Screen (save mode of monitor?) after a few minutes:

disable the screensaver

Firstly , thanks for your reply soon , but thaere’s not about screensaver , its seem a monitor auto sleep/save mode , just black screen no screensaver.

[wishmaster270]

@peterpang Hi, Raspberry OS has an built in feature called screen blanking. Maybe that is the problem. You can disable it by adding a “consoleblank=0” to the line in “/boot/cmdline.txt” and reboot the pi.
But i did not have this problem in my recent installations.

[PeterPang]

@wishmaster270
Thanks again , try later ^^

[PeterPang]

@wishmaster270
I open the File Manager , then open the " boot " folder , then click into the " cmdline.txt , see there’s a text :
" console=serial0,115200 console=tty1 root=PARTUUID=7e583fb6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles "
add “consoleblank=0” here ? add in the first place or where else ?
sorry , I’m just a very very Beginner , the first time in writing progamme

[wishmaster270]

@peterpang Hi, that’s the right file. Simply add it at the end before the closing "

[PeterPang]

@wishmaster270
I try to add " consoleblank=0 " to the cmdline.txt ,
but
failed to save the document Permission denied
=,="
What I can do ?=.="
Please help

[PeterPang]

https://github.com/sdetweil/MagicMirror_scripts

additional scripts that may be useful
the install has two sections of additional support I have provided those separately too, in case u need to run one separately, or changed your mind after install

turn off screen saver and setup pm2 to autostart MM on boot…
screensaveroff.sh, cut/paste this line into the terminal window on your device

bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/screensaveroff.sh)”

fixuppm2.sh, cut/paste this line into the terminal window on your device

bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/fixuppm2.sh)”

[wishmaster270]

@peterpang Hi, you need to run the editor with root privileges “sudo vi …” or “sudo nano …”