Read the statement by Michael Teeuw here.
Are you tired of editing config.js, or have trouble doing it, see my new module
-
@sdetweil I did have showQR set to true in the module config, but the QR code wasn’s showing up.
After changing the address in the mm config from localhost to 0.0.0.0 the QR code is now appearing on the magic mirror.
Now when I try to access the form from my pc I get “This device is not allowed to access your mirror.
Please check your config.js or config.js.sample to change this.”
and the terminal on the pi says “Access denied to IP address: 192.168.2.5”I tried to add it to the ipWhitelist, but I don’t think I have the proper format because it’s not working?
Module entry is:
modules: [ { module:"MMM-Config", position:"top_right", // the QR code (if requested) will appear here config:{ } }, { module: "alert", }, { module: "updatenotification", position: "top_bar" }, { module: "clock", position: "top_left" }, { module: "calendar", header: "US Holidays", position: "top_left", config: { calendars: [ { symbol: "calendar-check", url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics" } ] }etc
This is how I tried to whitelist my computers ip
ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1","192.168.2.5"], // Set [] to allow all IP addressesI appreciate your help very much!
-
@josh45631 said in Are you tired of editing config.js, or have trouble doing it, see my new module:
ipWhitelist: [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”,“192.168.2.5”],
this means ONLY apps on THIS machine (127.0.0.1 = localhost) are allowed to connect, EVEN if address: is NOT localhost
1st thing to do is disable whitelist , set to [] (means no ip filtering)
fix it after u get things workingalso u really want to add
showQR:true
in the MMM-Config
config section{ module:"MMM-Config", position:"top_right", // the QR code (if requested) will appear here config:{ showQR:true } }, -
@sdetweil Ok here’s where I am. I think I’ve made the proper changes in the config file.
Changed address to 0.0.0.0
Changed ipWhitelist to []
Added showQR: “true”* Magic Mirror Config Sample * * By Michael Teeuw https://michaelteeuw.nl * MIT Licensed. * * For more information on how you can configure this file * see https://docs.magicmirror.builders/getting-started/configuration.html#general * and https://docs.magicmirror.builders/modules/configuration.html */ let config = { address: "0.0.0.0", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "0.0.0.0", "::" to listen on any interface // Default, when address config is left out or empty, is "localhost" port: 8080, basePath: "/", // The URL path where MagicMirror is hosted. If you are using a Reverse proxy // you must set the sub path here. basePath must end with a / ipWhitelist: [], // Set [] to allow all IP addresses // or add a specific IPv4 of 192.168> // ["127.0.0.1", "::ffff:127.0.0.1",> // or IPv4 range of 192.168.3.0 --> > // ["127.0.0.1", "::ffff:127.0.0.1",> useHttps: false, // Support HTTPS or not, default "false" will use HTTP httpsPrivateKey: "", // HTTPS private key path, only require when useHttps is true httpsCertificate: "", // HTTPS Certificate path, only require when useHttps is true language: "en", locale: "en-US", logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging timeFormat: 24, units: "metric", // serverOnly: true/false/"local" , // local for armv6l processors, default // starts serveronly and then starts chrome browser // false, default for all NON-armv6l devices // true, force serveronly mode, because you want to.. no UI on this device modules: [ { module:"MMM-Config", position:"top_right", // the QR code (if requested) will appear here config:{ showQR: "true" } }, { module: "alert", }, { module: "updatenotification", position: "top_bar" }, { module: "clock", position: "top_left" }, { module: "calendar", header: "US Holidays", position: "top_left", config: { calendars: [ { symbol: "calendar-check", url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics" } ] } }, { module: "compliments", position: "lower_third" }, { module: "weather", position: "top_right", config: { weatherProvider: "openweathermap", type: "current", location: "Gallipolis", locationID: "", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city apiKey: "YOUR_OPENWEATHER_API_KEY" } }, { module: "weather", position: "top_right", header: "Weather Forecast", config: { weatherProvider: "openweathermap", type: "forecast", location: "New York", locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your ci> apiKey: "YOUR_OPENWEATHER_API_KEY" } }, { module: "newsfeed", position: "bottom_bar", config: { feeds: [ { title: "New York Times", url: "https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml" } ], showSourceTitle: true, showPublishDate: true, broadcastNewsFeeds: true, broadcastNewsUpdates: true } }, ] }; /*************** DO NOT EDIT THE LINE BELOW ***************/ if (typeof module !== "undefined") {module.exports = config;}The QR code is showing up in the top right of the magic mirror.
When I try to navigate to
http://192.168.2.13:8080/modules/MM-Config/review
all I get is “Cannot GET /modules/MM-Config/review”If it helps, this is the terminal output at startup:
[27.11.2021 23:08.01.269] [LOG] Starting MagicMirror: v2.17.1 [27.11.2021 23:08.01.283] [LOG] Loading config ... [27.11.2021 23:08.01.296] [LOG] Loading module helpers ... [27.11.2021 23:08.01.954] [LOG] Initializing new module helper ... [27.11.2021 23:08.01.956] [LOG] Module helper loaded: MMM-Config [27.11.2021 23:08.01.959] [LOG] No helper found for module: alert. [27.11.2021 23:08.01.968] [LOG] Initializing new module helper ... [27.11.2021 23:08.01.969] [LOG] Module helper loaded: updatenotification [27.11.2021 23:08.01.971] [LOG] No helper found for module: clock. [27.11.2021 23:08.02.295] [LOG] Initializing new module helper ... [27.11.2021 23:08.02.296] [LOG] Module helper loaded: calendar [27.11.2021 23:08.02.298] [LOG] No helper found for module: compliments. [27.11.2021 23:08.02.301] [LOG] No helper found for module: weather. [27.11.2021 23:08.02.348] [LOG] Initializing new module helper ... [27.11.2021 23:08.02.349] [LOG] Module helper loaded: newsfeed [27.11.2021 23:08.02.350] [LOG] All module helpers loaded. [27.11.2021 23:08.02.521] [LOG] Starting server on port 8080 ... [27.11.2021 23:08.02.532] [WARN] You're using a full whitelist configuration to allow for all IPs [27.11.2021 23:08.02.545] [LOG] Server started ... [27.11.2021 23:08.02.547] [LOG] Connecting socket for: MMM-Config [27.11.2021 23:08.02.548] [LOG] Starting module helper: MMM-Config [27.11.2021 23:08.02.550] [LOG] Connecting socket for: updatenotification [27.11.2021 23:08.02.552] [LOG] Connecting socket for: calendar [27.11.2021 23:08.02.553] [LOG] Starting node helper for: calendar [27.11.2021 23:08.02.554] [LOG] Connecting socket for: newsfeed [27.11.2021 23:08.02.556] [LOG] Starting node helper for: newsfeed [27.11.2021 23:08.02.557] [LOG] Sockets connected & modules started ... [27.11.2021 23:08.02.932] [LOG] Launching application. [27.11.2021 23:08.06.686] [LOG] Create new calendarfetcher for url: http://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics - Interval: 300000 [27.11.2021 23:08.07.027] [LOG] Create new newsfetcher for url: https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml - Interval: 300000 [27.11.2021 23:08.07.039] [LOG] MMM-Config received a socket notification: CONFIG - Payload: [object Object] [27.11.2021 23:08.07.042] [LOG] command =/home/pi/MagicMirror/modules/MMM-Config/test_convert.sh override [27.11.2021 23:08.07.044] [LOG] Starting module helper:MMM-Config [27.11.2021 23:08.07.045] [LOG] execing /home/pi/MagicMirror/modules/MMM-Config/test_convert.sh override [27.11.2021 23:08.07.340] [INFO] Checking git for module: default [27.11.2021 23:08.07.378] [INFO] Checking git for module: MMM-Config [27.11.2021 23:08.07.579] [LOG] got port=8300 [27.11.2021 23:08.08.352] [INFO] Calendar-Fetcher: Broadcasting 1 events. [27.11.2021 23:08.09.037] [INFO] Newsfeed-Fetcher: Broadcasting 55 items. [27.11.2021 23:08.13.839] [LOG] stdout: completedI apologize if I’m being difficult. I was just getting very frustrated trying to manually configure modules, and when I stumbled across your module, I got excited! I feel like I’m overlooking something simple!:grimacing_face:
-
@josh45631 said in Are you tired of editing config.js, or have trouble doing it, see my new module:
showQR: “true”
This should be
showQR: truewithout the quotes. Not sure if it makes much of a difference.The URL I used and which worked for me was:
http://localhost:8080/modules/MMM-Config/config.html?port=8300@sdetweil Very cool module.
-
@josh45631 I had a typo which I corrected
http://192.168.2.13:8080/modules/MM-Config/reviewnotice the module name is MMM-Config
3 M’s
the content says the module is running
if you use your phone on the qr does the page show?
-
@mumblebaj don’t use the final url… use the review url as provided in the doc
as the module discovers a free port for communication between the form and the module. -
@sdetweil said in Are you tired of editing config.js, or have trouble doing it, see my new module:
notice the module name is MMM-Config
3 M’s:man_facepalming:
There it is. I knew it would come down to something simple! I still can’t get to the form page by scanning the QR code, but I’m ok with that for now because I can access it via browser!Thank you so much!
-
@josh45631 what are you using to scan the qr?
-
@sdetweil Which URL in the doc? From the screenshots? The review URL did not work for me. The one I posted above did. The QR code gave me a different URL which did not work for me but guess it is because of my install on my Windows laptop.
Check out my modules at: https://github.com/mumblebaj?tab=repositories
Check my blog-post: https://mumblebaj.xyz/ -
@sdetweil I found the URL bit in the doc.
http://machine_name:MM_Port/modules/MMM-Config/review
Did not work for me when I tried it though.
