Read the statement by Michael Teeuw here.
Hello-Lucy using Adafruit Voice Bonnet
-
@sinbad339 can u try this
arecord -D default -q -r 16000 -c 1 -t wav -f S16_LE >test.wavthe replace default with
arecord -D hw:2,0 -q -r 16000 -c 1 -t wav -f S16_LE >test.wav -
@sdetweil
With MM running, if I issuearecord -D default -q -r 16000 -c 1 -t wav -f S16_LE >test.wavI get a good .wave file that I can play.
With MM still running, specifying the hw explicitly results in an error.arecord -D hw:2,0 -q -r 16000 -c 1 -t wav -f S16_LE >test2.wav arecord: main:830: audio open error: Device or resource busy pi@Magic:~/MagicMirror/config $ arecord -l **** List of CAPTURE Hardware Devices **** card 2: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 [bcm2835-i2s-wm8960-hifi wm8960-hifi-0] Subdevices: 0/1 Subdevice #0: subdevice #0 -
@sinbad339 said in Hello-Lucy using Adafruit Voice Bonnet:
With MM still running, specifying the hw explicitly results in an error.
ok, so MM is using that device
while mm is running do
ps -ef | grep arec
u should see the arecord process and the parms passed
from one of my apps that uses arecordarecord -D default -q -r 16000 -c 1 -t wav -f S16_LE -the trailing dash means stream content to stdout (which is captured by the upstream library)
-
-
@sdetweil
So the arecord -l lists card2 as my expected capture device (seeed-2mic-voicecard). I find it interesting that it enumverates as #2 with no #0 or #1.Anyway, I ran your ps command; not sure what this output means (as I’m sure you’re aware by now, I’m a Noob on Linux).
ps -ef | grep arec pi 1953 1927 0 11:04 pts/0 00:00:00 grep --color=auto arec -
@sinbad339 hm…
should have used arecord…
try
ps -ef | grep rec(there are only 2 apps… arecord or rec )
the output from ps
pi 1953 1927 0 11:04 pts/0 00:00:00 grep --color=auto arecuser that started process
the process id
the parent process id +
(i don’t know, 0)
the time the process was started
(i don’t know, pts/ )
how much cpu time has been used since started, in seconds
the string used to start the process, pgm name and then parms -
ps -ef | grep rec root 76 2 0 11:02 ? 00:00:00 [vchiq-recy/0] pi 2320 1927 0 11:24 pts/0 00:00:00 grep --color=auto recNot sure what vchiq-recy is…
But no arec or arecord. -
@sinbad339 said in Hello-Lucy using Adafruit Voice Bonnet:
But no arec or arecord.
well, that explains the error…
you did run the installation dependencies script, right?
cd Hello-Lucy/installers bash dependencies.sh -
@sdetweil
Yes, I did run it. Its been a while, and I remember warning about depreciated versions, but nothing that I thought could be an issue. OK to run it again? -
@sinbad339 said in Hello-Lucy using Adafruit Voice Bonnet:
OK to run it again?
i don’t think there is a need
add debug:true to the module config section
module: config: { debug:true, .... whatever else was there }and then
pm2 stop all cd ~/MagicMirror npm start >somefile.txtwhen error reported
alt-spacebar, n to minimize mm
ctrl-c to stop mm
and look at somefile.txt -
@sdetweil
WELL, now it seems to work. Running from command line w/ debug, I don’t get microphone with ERROR, and if I say “Hello Lucy”, it prompts for a command, then does it, and issues the “ding”. I’ve done this three times now, and its worked every time. Here’s the debug outout:> magicmirror@2.18.0 start /home/pi/MagicMirror > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js [05.01.2022 11:55.24.384] [LOG] Starting MagicMirror: v2.18.0 [05.01.2022 11:55.24.394] [LOG] Loading config ... [05.01.2022 11:55.24.404] [LOG] Loading module helpers ... [05.01.2022 11:55.26.860] [LOG] Initializing new module helper ... [05.01.2022 11:55.26.864] [LOG] Module helper loaded: Hello-Lucy [05.01.2022 11:55.26.866] [LOG] All module helpers loaded. [05.01.2022 11:55.27.040] [LOG] Starting server on port 8081 ... [05.01.2022 11:55.27.066] [LOG] Server started ... [05.01.2022 11:55.27.069] [LOG] Connecting socket for: Hello-Lucy [05.01.2022 11:55.27.071] [LOG] Starting module helper: Hello-Lucy [05.01.2022 11:55.27.073] [LOG] Sockets connected & modules started ... [05.01.2022 11:55.27.482] [LOG] Launching application. [05.01.2022 11:55.37.133] [LOG] Hello-Lucy has recognized: ALL IS THE [05.01.2022 11:56.16.829] [LOG] Hello-Lucy has recognized: NINE -
The difference is how MM is started. If I do it the manual way, the microphone works (with or without debug enabled). If MM does its normal autostart, using mm.sh that includes DISPLAY=:0 npm start, then the microphone doesn’t work.
-
@sinbad339 said in Hello-Lucy using Adafruit Voice Bonnet:
its normal autostart,
how is that done? pm2 or did u do some other setup
sounds like mm is not running as user but as root?
-
@sdetweil
I followed the instructions from https://www.magicmirrorcentral.com/complete-raspberry-pi-magic-mirror-tutorial/.
It includedtype in the following command: pm2 startup A different command will appear. Run that command also. Now create a shell script for startup. Open up the built-in text editor on the Pi by typing in: cd ~ nano mm.sh The lower line basically means, “open up a file called mm.sh in the nano text editor.” When the text editor has opened, add this to the mm.sh file: cd ~/MagicMirror DISPLAY=:0 npm start Make your shiny new script executable by typing in: chmod +x mm.sh Now start up Magic Mirror and make it start up on boot: pm2 start mm.sh pm2 save Now, reboot your Pi by typing in sudo reboot -
@sinbad339 hm… my install script does all that.
mm.sh already exists in the installers folder.
try my fixuppm2.sh from here
https://github.com/sdetweil/MagicMirror_scripts -
@sdetweil
Let me start by saying I really appreciate your help with this. You’ve given me a lot of your time, and clearly I couldn’t have made any progress without you. Thank you.Running your fixupppm2 script fixes the microphone on a restart, but then there is no speaker output. If I stop MM, then manually restart it with npm start, the mic and speaker work fine, as before the fixup.
-
@sinbad339 that makes no sense to me.
could u start it w pm2, and then ps -ef >somefile.txtand email me thevfile some file.txt
same userid as here at gmail.
I want to see if there is some permissions problem
oh, check the file contents to make sure no userid or password is exposed. shouldn’t be but u never know.
-
@sdetweil
Just sent it… -
Just sent two additional files; one where the speaker worked, and one where it didn’t. As I explained in the email, this is an intermittent issue and it doesn’t matter how MM is started.
-
@sinbad339 i replied
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login