MMM-HomeKit | Control your MagicMirror with Apple HomeKit

[a0ies]

This post is deleted!

[amaralia]

@Caimin Bonjour a toi

Would it be possible for you to give me a hand,

I have homebridge on one raspberry and magic mirror on another.

i am using hdmi on the magic mirror.

I can’t understand why I have this error on the image

Yours

j’ai cette configuration

{
    "platform": "cmdSwitch2",
    "name": "Ecran Mirroir",
    "switches": [
        {
            "name": "magicmirror",
            "on_cmd": "curl -s 'http://192.168.1.2:8080/remote?action=MONITORON'",
            "off_cmd": "curl -s 'http://192.168.1.2:8080/remote?action=MONITOROFF'",
            "state_cmd": "sshpass -p 'Armagedon13' ssh -oStrictHostKeyChecking=no pi@192.168.1.2 vcgencmd display_power | grep -q 'HDMI DMT && echo '1'",
            "polling": true,
            "interval": 10,
            "manufacturer": "Raspberry Pi Foundation",
            "model": "Raspberry Pi 3 Model B"
        }
    ]
}

[sdetweil]

@amaralia said in MMM-HomeKit | Control your MagicMirror with Apple HomeKit:

grep -q 'HDMI DMT && echo ‘1’

seems u are missing a single quote (before the && )

[banbutcher]

Just installed homekit and its great… i can now have the mirror switch off when i say goodnight using shortcuts, i also have it set to turn off when im not there and switch on when i get home!

next step is to get it to switch on my playstation on voice! :)

[fragler]

Hello,
I am trying to setup a Mirror and make it work with homekit. I’m very unexperienced with coding and basically everything here :)
I followed the instructions and get the following error.
I would appreciate your help a lot!
Thank you in advance:

[11.12.2020, 17:48:04] Loading 2 platforms…
[11.12.2020, 17:48:04] [Config] Initializing config platform…
[11.12.2020, 17:48:04] [Config] Running in Service Mode
[11.12.2020, 17:48:04] [Raspberry Pi] Initializing cmdSwitch2 platform…
[11.12.2020, 17:48:04] Error: Cannot add a bridged Accessory with the same UUID as another bridged Accessory: 74adc578-9ce9-42de-bbbb-5e3d84a287a1
at Bridge.Accessory._this.addBridgedAccessory (/usr/lib/node_modules/homebridge/node_modules/hap-nodejs/src/lib/Accessory.ts:416:15)
at /usr/lib/node_modules/homebridge/src/server.ts:310:19
at Array.filter ()
at Server.restoreCachedPlatformAccessories (/usr/lib/node_modules/homebridge/src/server.ts:270:69)
at Server.start (/usr/lib/node_modules/homebridge/src/server.ts:158:10)
at cli (/usr/lib/node_modules/homebridge/src/cli.ts:80:10)
at Object. (/usr/lib/node_modules/homebridge/bin/homebridge:17:22)
at Module._compile (internal/modules/cjs/loader.js:1063:30)
at Object.Module._extensions…js (internal/modules/cjs/loader.js:1092:10)
at Module.load (internal/modules/cjs/loader.js:928:32)

[sdetweil]

@fragler said in MMM-HomeKit | Control your MagicMirror with Apple HomeKit:

: Cannot add a bridged Accessory with the same UUID as another bridged Accessory

[BKeyport]

@fragler
FYI, this non-module is a piece of abandonware.

Looks like you’ve got two devices using the same ID.

Do you have homebridge on your network already?

https://homebridge.io/ is the underlying software, and has moved past what this module had supported. I personally went to a smart plug instead. There’s too many problems with this module to set it up. Took me a solid 3 weeks of debugging to get this to work part of the time.

[fragler]

@BKeyport Yes I have homebridge online and running. But there is no other device I’m using with homebridge.

Okay if this module does not work well, then that’s another story.
The problem with the smart plug is that when I turn off the monitor (i.e. kill power) and turn power on again, I need to turn the monitor on with a button as well. So if I were to use a smart plug I could turn on power for the monitor but would still have to press a button :/
That’s why I thought this would be a great solution with this module…
But thank you all so much for your quick replies!!

[BKeyport]

OK, then I think the Homebridge already has the accessory partially or fully defined. Something’s happening that duplicating your install somewhere.

[MajorC]

@bkeyport is there a way to show my EVE Weather station data via HomeKit or HomeBridge on the MagicMirror?

[BKeyport]

@majorc I stopped using this, It’s not really a “MagicMirror” module. It’s a basic concept.

I don’t know much about homebridge. You could look at https://homebridge.io/

[janth]

Hello :) I have been using th cmdSwitcht2 plugin for the past 3 years. Last weekend I updated homebridge for the (to me) new UI-X and MM and Raspberry Pi OS… I thought it’d take me an hour or so.

I can’t get the on-command to work. I tried different commands like 'vcgencmd display_power 1* and the one that is suggested here. vcgencmd display_power 1 does not work. /opt/vc/bin/tvservice -p; sudo /bin/chvt 6; sudo /bin/chvt 7 works from user pi, but homebridge runs from a different user also called homebridge.

When turning the switch on, it logs the following: "Failed to turn on Spiegelmonitor

[24.9.2021, 09:59:26] [cmdSwitch2] sudo: Kein TTY vorhanden und kein »askpass«-Programm angegeben

When running tvservice --preferred && sudo chvt 6 && sudo chvt 7 from the console in Homebridge UI X, it says

chvt: ioctl VT_ACTIVATE: Die Operation ist nicht erlaubt

I tried to give homebridge the same rights in /etc/sudoers and checked /dev/fb0 rights but I don’t fully understand everything I did there. Has anyone had the same issue before?

[Jag_k]

Hello guys! Some days ago, I created a plugin for Homebridge to connect MagicMirror!

Now this plugin can:

• Change brightness of mirror
• Enable/disable monitor

In future, I want add switchers to on/off modules on mirror, CPU/GPU usage, rebooting mirror (hardware and software), CPU temperature and more

Please, give feed-back about this plugin

[BKeyport]

@jag_k 404 on the link.