MMM-Spotify

A Former User

@banbutcher
Try this. (But it could make unexpected result by your other modules. anyway worthy to try)

/* In your `css/custom.css` */
#SPOTIFY {
    position: absolute;
    right:0;
}

Or you can adjust by manual.

#SPOTIFY {
  left: 150px ; /* depends on your layout */
}

Lasmazze

@Sean Ok thank you for your answer. apart from that your modules work really well, continue like that!

SuperfrogMe

Hi !
Thirst, thanks to the devs for this module and the multi account function !

I have a problem with the module. After some songs, the module stay stuck on a song.
I have only some modules on my MM, and all others modules work fine.

We are 2 at home, with 2 premium account and 1 Spotify Connect receiver. We mainly use le Spotify Connect receiver.

The problem occurs with all the revceivers (Spotify connect or smartphones).

Do you have an idea of the problem ?

Annotation 2020-04-14 180026.png

[
  {
      "USERNAME": "First user",
      "CLIENT_ID" : "xxx",
      "CLIENT_SECRET" : "yyy",
      "AUTH_DOMAIN" : "http://localhost",
      "AUTH_PATH" : "/callback",
      "AUTH_PORT" : "8888",
      "SCOPE" : "user-read-private app-remote-control playlist-read-private streaming user-read-playback-state user-modify-playback-state",
      "TOKEN" : "./firstuser_token.json"
  },
  {
      "USERNAME": "Second user",
      "CLIENT_ID" : "zzz",
      "CLIENT_SECRET" : "www",
      "AUTH_DOMAIN" : "http://localhost",
      "AUTH_PATH" : "/callback",
      "AUTH_PORT" : "8888",
      "SCOPE" : "user-read-private app-remote-control playlist-read-private streaming user-read-playback-state user-modify-playback-state",
      "TOKEN" : "./seconduser_token.json"
  }
]

SuperfrogMe

I did a clean total reinstallation of my RPI3 under Raspbian Buster. Always the same problem, module blocked after a few minutes.

Can we think of a bug?
I will reinstall MMM-Spotify with only 1 account configured to see if the problem recurs.

ForrestFire2222

Hi!

I have been trouble shooting an install of MMM-Spotify for a few days now and I can’t seem to authorize/authenticate the token…

When executing Step 4 of the install Get Auth;

cd ~/MagicMirror/modules/MMM-Spotify node first_auth.js

My terminal hangs up and I need to CTRL-C to get out.

pi@raspberrypi:~/MagicMirror $ npm start dev

> magicmirror@2.11.0 start /home/pi/MagicMirror
> DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js "dev"

[2020-04-20 17:46:11.400] [LOG]    Starting MagicMirror: v2.11.0
[2020-04-20 17:46:11.413] [LOG]    Loading config ...
[2020-04-20 17:46:11.427] [LOG]    Loading module helpers ...
[2020-04-20 17:46:11.433] [LOG]    No helper found for module: alert.
[2020-04-20 17:46:11.538] [LOG]    Initializing new module helper ...
[2020-04-20 17:46:11.539] [LOG]    Module helper loaded: updatenotification
[2020-04-20 17:46:11.541] [LOG]    No helper found for module: clock.
[2020-04-20 17:46:12.258] [LOG]    Initializing new module helper ...
[2020-04-20 17:46:12.260] [LOG]    Module helper loaded: MMM-Spotify
[2020-04-20 17:46:12.262] [LOG]    All module helpers loaded.
[2020-04-20 17:46:12.503] [LOG]    Starting server on port 8080 ... 
[2020-04-20 17:46:12.531] [LOG]    Server started ...
[2020-04-20 17:46:12.533] [LOG]    Connecting socket for: updatenotification
[2020-04-20 17:46:12.535] [LOG]    Connecting socket for: MMM-Spotify
[2020-04-20 17:46:12.539] [LOG]    Sockets connected & modules started ...
[2020-04-20 17:46:12.700] [LOG]    Whoops! There was an uncaught exception...
[2020-04-20 17:46:12.701] [ERROR]  Error: listen EADDRINUSE: address already in use 127.0.0.1:8080
    at Server.setupListenHandle [as _listen2] (net.js:1226:14)
    at listenInCluster (net.js:1274:12)
    at GetAddrInfoReqWrap.doListen [as callback] (net.js:1413:7)
    at GetAddrInfoReqWrap.onlookup [as oncomplete] (dns.js:65:10) {
  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '127.0.0.1',
  port: 8080
}

My 8080 port is already in use causing an error? I’ve followed the installation procedure and verified my callback in Spotify Dev is copy and pasted as http://localhost:8888/callback
My spotify.config.json;

[
  {
      "USERNAME": "myname",
      "CLIENT_ID" : "spot_id",
      "CLIENT_SECRET" : "spot_secret",
      "AUTH_DOMAIN" : "http://localhost",
      "AUTH_PATH" : "/callback",
      "AUTH_PORT" : "8888",
      "SCOPE" : "user-read-private app-remote-control playlist-read-private streaming user-read-playback-state user-modify-playback-state",
      "TOKEN" : "./myname_token.json"
  }
]

My MagicMirror config.js;

var config = {
        address: "localhost",           // Address to listen on, can be:
                              // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
                              // - another specific IPv4/6 to listen on a specific interface
                              // - "", "0.0.0.0", "::" to listen on any interface
                              // Default, when address config is left out, is "localhost"
        port: 8080,
        ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"],
                                                                // Set [] to allow all IP addresses
                                                               // or add a specific IPv4 of 192.168.1.5 :
                                                               // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
                                                               // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
                                                               // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

        language: "en",
        timeFormat: 24,
        units: "imperial",
        // serverOnly:  true/false/"local" ,
                             // local for armv6l processors, default 
                             //   starts serveronly and then starts chrome browser
                             // false, default for all  NON-armv6l devices
                             // true, force serveronly mode, because you want to.. no UI on this device

        modules: [
                {
                        module: "MMM-Spotify",
                        position: "lower_third",
                        config: {
                                style: "mini", // "default" or "mini" available
                                control: "hidden", //"default", "hidden" available
                                updateInterval: 2000,
                                onStart: null, // disable onStart feature with `null`
                                allowDevices: [], //If you want to limit devices to display info, use this.
                                // allowDevices: ["RASPOTIFY", "My iPhoneX", "My Home speaker"],
                                }
                },

Any help, thanks

A Former User

@ForrestFire2222
It’s not issue of module. You just executed MagicMirror twice.

ForrestFire2222

@Sean I really appreciate the reply.

Im new so maybe I didn’t convey my issue/logs correctly. As I mention above, when I try to execute Step 4, I get the error below…

pi@raspberrypi:~/MagicMirror/modules/MMM-Spotify $ node first_auth.js
[SPOTIFY_AUTH] creating server { USERNAME: 'MyName',
  CLIENT_ID: 'My_ID',
  CLIENT_SECRET: 'My_Secret',
  AUTH_DOMAIN: 'http://localhost',
  AUTH_PATH: '/callback',
  AUTH_PORT: '8888',
  SCOPE:
   'user-read-private app-remote-control playlist-read-private streaming user-read-playback-state user-modify-playback-state',
  TOKEN: './MyName_token.json' }
[SPOTIFY_AUTH] Opening URL.(https://accounts.spotify.com/authorize?response_type=code&client_id=My_ID&scope=user-read-private%20app-remote-control%20playlist-read-private%20streaming%20user-read-playback-state%20user-modify-playback-state&redirect_uri=http%3A%2F%2Flocalhost%3A8888%2Fcallback&state=1587478945270&show_dialog=true)

At this point the terminal just stalls out. Hope this clarifies the above, my configs are still above. Thanks again

A Former User

@ForrestFire2222
If browser couldn’t open the url automatically, copy the URL and paste it into your web browser.

ForrestFire2222

@Sean Thanks.

I’ve tried a couple things…

through ssh i tried the link on my laptop browser, and I got an error displayed on the page of “INVALID_CLIENT: Invalid client”.

And on my Mirror, through the command line i executed node first_auth.js and the browser opened up to login to Spotify (this is a good sign, haven’t got this far yet), however, when I enter my Spotify Acct info I get the same error as above, Invalid Client.

ForrestFire2222

I started from scratch, loading MMM-Spotify first to my mirror and it works with no issues… sorry I didn’t try that sooner. Thanks again!