MMM-Alexaonoff can’t find devices

[sdetweil]

@Stoffbeuteluwe u need to specify the network adapter interface name in the module config section…
see the module readme…

ifconfig 

will list all the network interfaces on your system, select the one with an assigned ip address
here is from my pi

eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500    // < --- no ip address here
        ether b8:27:eb:ee:23:81  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536   // < this is the loopback adapter (127.0.01/localhost)
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 5153998  bytes 99881551583 (93.0 GiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 5153998  bytes 99881551583 (93.0 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.2.35  netmask 255.255.255.0  broadcast 192.168.2.255   // < -- this is the one
        inet6 fe80::7983:5fdf:71b7:86  prefixlen 64  scopeid 0x20<link>
        ether b8:27:eb:bb:76:d4  txqueuelen 1000  (Ethernet)
        RX packets 70945054  bytes 520903477 (496.7 MiB)
        RX errors 0  dropped 233688  overruns 0  frame 0
        TX packets 35358956  bytes 3262063548 (3.0 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[Stoffbeuteluwe]

@sdetweil thanks sam i will try tonight

[Stoffbeuteluwe]

@sdetweil Hey Sam …congratulations you solved my biggest Problem on my mirror, now it works and all devices where found. Thanks thanks …you are the greatest :folded_hands: :slightly_smiling_face:

[sdetweil]

@Stoffbeuteluwe cool. Glad to hear it

[Stoffbeuteluwe]

@sdetweil hi Sam can I ask you again ? :grinning_face:
my echo stopped working so I had to reset and now my devices are gone…
this is the same problem again but this time… put my ip adress into the MMM AlexaOnOff node.js helper does not work

Requested network interface wlan0 not found!
21900
21901
21902
21903
21904
21905
21906
21907
21908
21909
21910
21911
21912
21913
21914
21915
21916
21917
21918
21919
21920
21921
21922
21923
21924
21925
21926
21927
21928
21929
21930
21931
21932
21933
21934
21935
21936
21937
21938
21939
21940
FauxMo service started. Listening on 127.0.0.1:21900-21940

[sdetweil]

@Stoffbeuteluwe said in MMM-Alexaonoff can’t find devices:

network interface wlan0 not found

so, the network adapter name is wrong now

sudo ifconfig
to find the network adapter , then fix the MM config

[Stoffbeuteluwe]

seems everything looks good but no devices can be found??

SONOS_UPDATE
21900
21901
21902
21903
21904
21905
21906
21907
21908
21909
21910
21911
21912
21913
21914
21915
21916
21917
21918
21919
21920
21921
21922
21923
21924
21925
21926
21927
21928
21929
21930
21931
21932
21933
21934
21935
21936
21937
21938
21939
21940
21941
FauxMo service started. Listening on 192.168.178.33:21900-21941

anybody an idea?

[sdetweil]

@Stoffbeuteluwe can u show the output of ifconfig?

[Stoffbeuteluwe]

This post is deleted!

[sdetweil]

@Stoffbeuteluwe your device is en1, with that ip address… (192.168.178.33)

[Stoffbeuteluwe]

@sdetweil thanks will try again

[Stoffbeuteluwe]

@sdetweil the if config with wlan0 and 192.168.2.35 that was from your pi…

i think the only one i have done the last time …ist put my IP address in node js helper from the module than it works
but for now it’s not working

[Stoffbeuteluwe]

@sdetweil I set the device to en1 than the network adapter is ok but no devices

[sdetweil]

This post is deleted!

[Stoffbeuteluwe]

@sdetweil I have a Mac mini, i think wlan0 never exists on my Mac

[sdetweil]

This post is deleted!

[Stoffbeuteluwe]

@sdetweil hi Sam a month ago that was your post, you have shown me how it looks at your pi 😀
my Maschine is the same

[sdetweil]

This post is deleted!

[sdetweil]

@Stoffbeuteluwe so, can u go to one device and get its IP address somehow? so we can see if its on the same network address range…

also wonder if the code works on Mac… open the developers window and look at the console…
but u said it worked once…

maybe you can look in your router dhcp clients page

[sdetweil]

i can’t get alexa to discover any of virtual wemo devices