MM won't run, blank screen with cursor showing after updating

[sdetweil]

@jmartin1009 sure

cd ~
npm uninstall rrule

[jmartin1009]

@sdetweil how do i fix this?

pi@raspberrypi:~/MagicMirror $ npm install rrule
npm WARN acorn-jsx@5.0.1 requires a peer of acorn@^6.0.0 but none is installed. You must install peer dependencies yourself.
npm WARN grunt-stylelint@0.10.1 requires a peer of stylelint@^9.0.0 but none is installed. You must install peer dependencies yourself.

+ rrule@2.6.2
added 2 packages from 2 contributors and audited 2431 packages in 49.239s
found 4 vulnerabilities (2 low, 2 high)
  run `npm audit fix` to fix them, or `npm audit` for details
pi@raspberrypi:~/MagicMirror $ npm audit fix
npm WARN acorn-jsx@5.0.1 requires a peer of acorn@^6.0.0 but none is installed. You must install peer dependencies yourself.
npm WARN grunt-stylelint@0.10.1 requires a peer of stylelint@^9.0.0 but none is installed. You must install peer dependencies yourself.

up to date in 51.138s
fixed 0 of 4 vulnerabilities in 2431 scanned packages
  2 package updates for 4 vulns involved breaking changes
  (use `npm audit fix --force` to install breaking changes; or refer to `npm audit` for steps to fix these manually)

Thanks for all your help btw

[sdetweil]

@jmartin1009 said in MM won't run, blank screen with cursor showing after updating:
it says

run npm audit fix to fix them

many times you cannot fix them all… so, after one try, ignore it

[jmartin1009]

@sdetweil Okay! Do you know anything about MM-voice? having issues with that for some reason and i can’t figure out why.

[sdetweil]

@jmartin1009 yes, what troubles? i have it installed on one of my MagicMirror systems…

[jmartin1009]

@sdetweil I have it installed but when i run MM, the little microphone says initializing, then ERROR. I used debug: true, and the file said

1
1
1
1
1
1

[sdetweil]

@jmartin1009 ok. usually this is the device name of the mic…

run

arecord -l

to get the list of mic devices

make sure that is in the MMM-Voice config, mine is

       config: {
              microphone: '1,0',

[jmartin1009]

@sdetweil

pi@raspberrypi:~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 1: Snowball [Blue Snowball], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

does this mean it is 1 or 1,0?

[sdetweil]

@jmartin1009

card 1
device 0

1,0

you can also test the mic with

arecord -D hw:1,0 test.wav

ctrl-break , ctrl-c, or ctrl-z after saying something

then

aplay test.wav

to hear the recorded voice back

[jmartin1009]

@sdetweil should i change it in MM’s config file? or MM-voice’s file:MM-voice.js? and if the second, where?