no result from mvgmunich modul

andyyy

@thedoorsfanatic
That is a workaround for now. I wondering if this is a sole module issue or a config issue/problem with the MM or OS itself. Sooner or later we need update mvgmunich module though.

thedoorsfanatic

@andyyy
Ok, I got it working again. Since I am a beginner this might be a little bit unusual but that’s what I did:
1.) in my modules folder I renamed the existing folder to “mvgmunich_alt”
2.) then I did a new install as described here in step 1 and step 2: https://github.com/mrVragec/MMM-mvgmunich
3.) I skipped step 3 but I copied the whole configuration block from step 4 to my config.js
4.) Then I put in my information like haltestelle, etc. and it worked again
5.) I discovered that the ignoreStations part did not work but after putting in the name exactly like stated in https://www.mvg.de/dienste/abfahrtszeiten.html, for example “Moosach Bf. U S” everything was like before.

Hope that helps!

andyyy

@thedoorsfanatic
This approach doesn’t work for me. Now I have both versions installed. Running the old version from the config.js it works as aspected but if I change the directory to the latest version of the module doesn’t load the table/stations. I have no clue what to do next.

Babene1

I found the solution, it’s not a bug, it’s a new feature :-)

It is undocumented feature, some missing parts in configuration.
Now you able to filter some line unfortunately the filter is by default active. switch off the filter now it works.

lineFiltering: {
					"active": false, 			
					"filterType": "whitelist", 	
					"lineNumbers": ["U1, U3, X50"] 
				},

With this config it should be worked :

{
			module: 'mvgmunich',
			position: 'top_right',
			header: 'MVG',
			config: {
				haltestelle: 'Vaterstetten',
				maxEntries: 4,  
				updateInterval: 60000,  
				showIcons: true,
				transportTypesToShow: {
					"ubahn": false,            
					"sbahn": true,            
					"bus": false,              
					"regional_bus": false,     
					"tram": false              
				},
				lineFiltering: {
					"active": false, 			
					"filterType": "whitelist", 	
					"lineNumbers": ["U1, U3, X50"] 
				},
				ignoreStations: [],       
				timeToWalk: 0,             
				showWalkingTime: false,     
				showTrainDepartureTime: true,     
				trainDepartureTimeFormat: "relative",  
				walkingTimeFormat: "relative",    
				showInterruptions: true,
    			showInterruptionsDetails: true,
    			countInterruptionsAsItemShown: true,
			}
		},

andyyy

Good catch and thank you very much. That solved my issue too (at the moment at least). I knew that feature were introduced with the last update, but it is a bit strange to have this enabled by default.