a new problem with fhem

kusselin

o.k. thanks all for the good job to me. I will always better in Magic Mirror. Now i have installed the fhem module with:

cd ~/MagicMirror/modules
git clone https://github.com/BenRoe/MMM-FHEM

without npm install

then i go to the config an i put this into:

{
    module: 'MMM-FHEM',
    position: 'bottom_bar',
    config: {
      host: 'my IP',
      port: '8083',
      https: false,
      devices: [
                  { deviceName: 'Temperatur_Feuchte_Speicher',
                    deviceReadings: [
                                      { name: 'temperature', icon: 'wi wi-thermometer', suffix: '&deg;' },
                                      { name: 'humidity', icon: 'wi wi-humidity', suffix: '%' },
                                    ],
                  },
              
                ],
    },
  },

this is the device name of my sensor
but when i restart the mirror, my mirror is black on screen :-(

Fozi

@kusselin You must insert the IP-address of your FHEM in

host: 'my IP',

Check also if it is running on port 8083 or on another port.

If ‘npm install’ is required by the author of the module then it is advisable to do so (at least that is required so in the README.MD on github)

Just to make sure: This module is not supported anymore (as stated on the github repo).

thedoorsfanatic

Can’t spot a mistake at first glance. Does the mirror work if you deactivate the module? For example, with disabled: true,

Kann auf den ersten Blick keinen Fehler entdecken. Funktioniert der Spiegel, wenn du das Modul deaktivierst? Z.B. mit disabled:true,

kusselin

@Fozi said in a new problem with fhem:

@kusselin You must insert the IP-address of your FHEM in
host: 'my IP',
Check also if it is running on port 8083 or on another port.

If ‘npm install’ is required by the author of the module then it is advisable to do so (at least that is required so in the README.MD on github)

Just to make sure: This module is not supported anymore (as stated on the github repo).

Hi fozi, instead of IP NAS I of course wrote my IP 192.168.xxx.xx and the port is also 8083 standard

Fozi

@kusselin Have you deactivated the module like @thedoorsfanatic recommended? Alternatively you can also comment the module in config.js. Just to make sure that there are no other side-effects.

/*
….
…..
…..
*/

kusselin

Sorry, i Havent. Give me Time tomorrow please.

kusselin

@thedoorsfanatic said in a new problem with fhem:

disabled:true,

yes than i can see the mirror again and i have the npm install in the fhem directory make.
but so the mirror is not show again

Fozi

@kusselin said in a new problem with fhem:

yes than i can see the mirror again and i have the npm install in the fhem directory make.
but so the mirror is not show again

If the mirror is working again after deactivating the module, then remove the module from the /modules directory and re-install it from scratch.

$ sudo rm -R MMM-FHEM
$ git clone https://github.com/BenRoe/MMM-FHEM
$ cd MMM-FHEM
$ npm install

kusselin

@Fozi said in a new problem with fhem:

sudo rm -R MMM-FHEM

whats that!!

pi@raspberrypi:~ $  sudo rm -R MMM-FHEM
rm: das Entfernen von 'MMM-FHEM' ist nicht möglich: Datei oder Verzeichnis nicht gefunden
pi@raspberrypi:~ $ cd ~/MagicMirror/modules/MMM-FHEM
pi@raspberrypi:~/MagicMirror/modules/MMM-FHEM $ sudo rm -R MMM-FHEM
rm: das Entfernen von 'MMM-FHEM' ist nicht möglich: Datei oder Verzeichnis nicht gefunden
pi@raspberrypi:~/MagicMirror/modules/MMM-FHEM $

thedoorsfanatic

@kusselin
Du kannst den Ordner ja auch händisch über den Dateiexplorer löschen