Read the statement by Michael Teeuw here.
How I got my Magic Mirror working on a Raspberry Pi 0 (zero)
-
Hi everyone, I did not read all 16 pages of this thread but I successfully setup my MM on a Raspberry Pie Zero W, following this answer https://forum.magicmirror.builders/topic/1183/how-i-got-my-magic-mirror-working-on-a-raspberry-pi-0-zero/8
I decided to compile all instructions in a basic bash script since some of these steps can be quite long to execute: https://github.com/PipoloyJo/MMConfig/blob/master/setup-mirror.sh
Maybe someone else has already done the same, but I did not found it.
Only difference so far is the use of chromium over midori (I got some issues setting it up).
Thanks for this thread!
-
@lasharor did you using Raspberry Pi Zero W ?
-
@Andrius-ok Yes.
Tried the Image also. works fine after upgrading. Was not succesfull upgrading magicmirror however. Trying PipoloyJo solution now.
-
@lasharor ok tomorrow I will share the image
-
@PipoloyJo So I also tried this. Can you please specify which distro you are using? As this is not working on Jessie.
Also the script should contain apt-get upgrade in the beginning. Otherwise you’ll not be able to download most packages due to incorrect links.Trying now on stretch.
Edit: having problems with rpi-update (or upgrade), will not download the full image can’t run chrome in sandboxed mode. So tried to run MM by disabling sandboxed mode. End up with working Chrome but blank black screen.
:(
-
@lasharor I am using Raspbian Stretch. I also got issue with rpi-update, but I got MM to work without it.
-
@PipoloyJo If you don’t update you can’t launch Chromium in sandboxed mode, what are your flags for chrome?
@Andrius-ok Would be great if you could share.
-
@Andrius-ok said in How I got my Magic Mirror working on a Raspberry Pi 0 (zero):
@lasharor ok tomorrow I will share the image
Have you forgotten :(?
-
Hi @lasharor , my apologies. Yes I have forgotten, very sorry was on long vacation.
So there is my MM image with Chromium for Raspberry Pi Zero Whttps://www.dropbox.com/sh/kdo5q1pxjluca49/AACvP81YjZik6R90BHZNiSZ5a?dl=0
note: you have to configure WiFi by yoursefl and also all modules to work properly in Yours language.
-
@Andrius-ok Thank You! Worked Perfectly. Setup Wifi (your SSID and PW were still in there) and your config loaded. I am in the process of converting to my config.
