Fresh install but pm2 error

sdetweil

@Hubschra01 said in Fresh install but pm2 error:

0|MagicMir | ./run-start.sh: Zeile 68: Syntaxfehler beim unerwarteten Wort `fi’

there is the problem, syntax error…

can show the run-start.sh

I have to leave in about 15 minutes for the rest of the day

Hubschra01

@sdetweil

here is the run-start.sh

#!/bin/bash -x
  # use bash instead of sh
./untrack-css.sh

if [ -z "$DISPLAY" ]; then #If not set DISPLAY is SSH remote or tty
	export DISPLAY=:0 # Set by default display
fi
# get the processor architecture
arch=$(uname -m)
false='false'

# get the config option, if any
# only check non comment lines
serveronly=$(grep -v '^\s//'  config/config.js | grep -i serveronly: | awk '{print tolower($2)}' | tr -d ,\"\')
# set default if not defined in config
serveronly=${serveronly:-false}
# check for xwindows running
xorg=$(pgrep Xorg)
#check for macOS
mac=$(uname)
#
# if the user requested serveronly OR 
#    electron support for armv6l has been dropped OR
#    system is in text mode
#
if [ "$serveronly." != "false." -o  "$arch" == "armv6l" ] ||  [ "$xorg." == "." -a $mac != 'Darwin' ]; then

	# if user explicitly configured to run server only (no ui local)
	# OR there is no xwindows running, so no support for browser graphics
	if [ "$serveronly." == "true." -o "$xorg." == "." ]; then
	  # start server mode, 
	  node serveronly
	else 
		# start the server in the background
		# wait for server to be ready
		# need bash for this
		exec 3< <(node serveronly)

		# Read the output of server line by line until one line 'point your browser'
		while read line; do
			 case "$line" in
			 *point\ your\ browser*)
					echo $line 
					break
					;;
			 *)
					echo $line
					#sleep .25
					;;
			 esac
		done <&3

		# Close the file descriptor
		exec 3<&-	

		# lets use chrome to display here now
		# get the server port address from the ready message
		port=$(echo $line | awk -F\: '{print $4}')	
		# start chromium 
		echo "Starting chromium browser now, have patience, it takes a minute"
		chromium-browser -noerrdialogs -kiosk -start_maximized  --disable-infobars --app=http://localhost:$port  --ignore-certificate-errors-spki-list --ignore-ssl-errors --ignore-certificate-errors 2>/dev/null
		exit		  
	fi 
else  
	# we can use electron directly	
	electron js/electron.js $1;
fi

sdetweil

@Hubschra01 i don’t know… weird… don’t have more time today

sdetweil

Are u running two copies?

pm2 status

Hubschra01

No it is only one to see…

pi@raspberrypi:~/MagicMirror $ pm2 status
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0  │ MagicMirror        │ fork     │ 0    │ online    │ 0%       │ 2.4mb    │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@raspberrypi:~/MagicMirror $

sdetweil

@Hubschra01 weird… delete that instance

pm2 delete 0

then run my fixup script

bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/fixuppm2.sh)"

Hubschra01

@sdetweil

PM2        | 2020-01-21T11:38:39: PM2 log: Node.js version      : 10.18.1
PM2        | 2020-01-21T11:38:39: PM2 log: Current arch         : arm
PM2        | 2020-01-21T11:38:39: PM2 log: PM2 home             : /home/pi/.pm2
PM2        | 2020-01-21T11:38:39: PM2 log: PM2 PID file         : /home/pi/.pm2/pm2.pid
PM2        | 2020-01-21T11:38:39: PM2 log: RPC socket file      : /home/pi/.pm2/rpc.sock
PM2        | 2020-01-21T11:38:39: PM2 log: BUS socket file      : /home/pi/.pm2/pub.sock
PM2        | 2020-01-21T11:38:39: PM2 log: Application log path : /home/pi/.pm2/logs
PM2        | 2020-01-21T11:38:39: PM2 log: Worker Interval      : 30000
PM2        | 2020-01-21T11:38:39: PM2 log: Process dump file    : /home/pi/.pm2/dump.pm2
PM2        | 2020-01-21T11:38:39: PM2 log: Concurrent actions   : 2
PM2        | 2020-01-21T11:38:39: PM2 log: SIGTERM timeout      : 1600


/home/pi/.pm2/logs/MagicMirror-error.log last 15 lines:
0|MagicMir | + arch=armv7l
0|MagicMir | + false=false
0|MagicMir | ++ grep -i serveronly:
0|MagicMir | ++ awk '{print tolower($2)}'
0|MagicMir | ++ tr -d ',"'\'''
0|MagicMir | ++ grep -v '^\s//' config/config.js
0|MagicMir | + serveronly=
0|MagicMir | + serveronly=false
0|MagicMir | ++ pgrep Xorg
0|MagicMir | + xorg=429
0|MagicMir | ++ uname
0|MagicMir | + mac=Linux
0|MagicMir | + '[' false. '!=' false. -o armv7l == armv6l ']'
0|MagicMir | + '[' 429. == . -a Linux '!=' Darwin ']'
0|MagicMir | + electron js/electron.js

/home/pi/.pm2/logs/MagicMirror-out.log last 15 lines:
0|MagicMir | [11:38:49.100] [LOG]    Module helper loaded: calendar
0|MagicMir | [11:38:49.101] [LOG]    No helper found for module: currentweather.
0|MagicMir | [11:38:49.103] [LOG]    No helper found for module: weatherforecast.
0|MagicMir | [11:38:49.191] [LOG]    Initializing new module helper ...
0|MagicMir | [11:38:49.192] [LOG]    Module helper loaded: newsfeed
0|MagicMir | [11:38:49.193] [LOG]    All module helpers loaded.
0|MagicMir | [11:38:49.195] [LOG]    Starting server on port 8080 ...
0|MagicMir | [11:38:49.218] [LOG]    Server started ...
0|MagicMir | [11:38:49.220] [LOG]    Connecting socket for: updatenotification
0|MagicMir | [11:38:49.222] [LOG]    Connecting socket for: calendar
0|MagicMir | [11:38:49.223] [LOG]    Starting node helper for: calendar
0|MagicMir | [11:38:49.225] [LOG]    Connecting socket for: newsfeed
0|MagicMir | [11:38:49.226] [LOG]    Starting module: newsfeed
0|MagicMir | [11:38:49.227] [LOG]    Sockets connected & modules started ...
0|MagicMir | [11:38:49.889] [LOG]    Launching application.

0|MagicMirror  | [11:38:53.980] [LOG]
0|MagicMirror  | Create new calendar fetcher for url

sdetweil

@Hubschra01 that looks good now, right?

Hubschra01

@sdetweil
I think so, if this below is not an Error.
But what caused the error or what was the mistake?

/home/pi/.pm2/logs/MagicMirror-error.log last 15 lines:
0|MagicMir | + arch=armv7l
0|MagicMir | + false=false
0|MagicMir | ++ grep -i serveronly:
0|MagicMir | ++ awk '{print tolower($2)}'
0|MagicMir | ++ tr -d ',"'\'''
0|MagicMir | ++ grep -v '^\s//' config/config.js
0|MagicMir | + serveronly=
0|MagicMir | + serveronly=false
0|MagicMir | ++ pgrep Xorg
0|MagicMir | + xorg=429
0|MagicMir | ++ uname
0|MagicMir | + mac=Linux
0|MagicMir | + '[' false. '!=' false. -o armv7l == armv6l ']'
0|MagicMir | + '[' 429. == . -a Linux '!=' Darwin ']'
0|MagicMir | + electron js/electron.js

sdetweil

@Hubschra01 u can remove the -x from run-start.sh 1st line.

That is just debugging

Hubschra01

@sdetweil
Strange…
I flushed the log and i remove the -x from the run-start.sh.
after reboot i see this in the log again.

/home/pi/.pm2/logs/MagicMirror-error.log last 15 lines:
0|MagicMir | npm ERR! code ELIFECYCLE
0|MagicMir | npm ERR! errno 1
0|MagicMir | npm ERR! magicmirror@2.10.1 start: `./run-start.sh`
0|MagicMir | npm ERR! Exit status 1
0|MagicMir | npm ERR!
0|MagicMir | npm ERR! Failed at the magicmirror@2.10.1 start script.
0|MagicMir | npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
0|MagicMir |
0|MagicMir | npm ERR! A complete log of this run can be found in:
0|MagicMir | npm ERR!     /home/pi/.npm/_logs/2020-01-21T16_37_02_810Z-debug.log

/home/pi/.npm/_logs/2020-01-21T16_37_02_810Z-debug.log
0 info it worked if it ends with ok
1 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'start' ]
2 info using npm@6.13.4
3 info using node@v10.18.1
4 verbose run-script [ 'prestart', 'start', 'poststart' ]
5 info lifecycle magicmirror@2.10.1~prestart: magicmirror@2.10.1
6 info lifecycle magicmirror@2.10.1~start: magicmirror@2.10.1
7 verbose lifecycle magicmirror@2.10.1~start: unsafe-perm in lifecycle true
8 verbose lifecycle magicmirror@2.10.1~start: PATH: /usr/lib/node_modules/npm/node_modules/npm-lifecycle/node-gyp-bin:/home/pi/MagicMirror/node_modules/.bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
9 verbose lifecycle magicmirror@2.10.1~start: CWD: /home/pi/MagicMirror
10 silly lifecycle magicmirror@2.10.1~start: Args: [ '-c', './run-start.sh' ]
11 silly lifecycle magicmirror@2.10.1~start: Returned: code: 1  signal: null
12 info lifecycle magicmirror@2.10.1~start: Failed to exec start script
13 verbose stack Error: magicmirror@2.10.1 start: `./run-start.sh`
13 verbose stack Exit status 1
13 verbose stack     at EventEmitter.<anonymous> (/usr/lib/node_modules/npm/node_modules/npm-lifecycle/index.js:332:16)
13 verbose stack     at EventEmitter.emit (events.js:198:13)
13 verbose stack     at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/npm-lifecycle/lib/spawn.js:55:14)
13 verbose stack     at ChildProcess.emit (events.js:198:13)
13 verbose stack     at maybeClose (internal/child_process.js:982:16)
13 verbose stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
14 verbose pkgid magicmirror@2.10.1
15 verbose cwd /home/pi/MagicMirror
16 verbose Linux 4.19.75-v7+
17 verbose argv "/usr/bin/node" "/usr/bin/npm" "start"
18 verbose node v10.18.1
19 verbose npm  v6.13.4
20 error code ELIFECYCLE
21 error errno 1
22 error magicmirror@2.10.1 start: `./run-start.sh`
22 error Exit status 1
23 error Failed at the magicmirror@2.10.1 start script.
23 error This is probably not a problem with npm. There is likely additional logging output above.
24 verbose exit [ 1, true ]

weird:pouting_face:

sdetweil

@Hubschra01 and the mirror did not start?

Hubschra01

@sdetweil
The Mirror start an work fine now. :-) Thanks to you
So i have to consider the error in the log as normal?

sdetweil

@Hubschra01 i wonder if that is the shutdown log, on the reboot…

but there should be more on restart

Hubschra01

@sdetweil
if i understand you right your oppinion is that this error meassage is the shutdown message and not a start up error?

sdetweil

@Hubschra01 yes
do

pm2 logs --lines=100

Hubschra01

@sdetweil
[TAILING] Tailing last 100 lines for [all] processes (change the value with --lines option)

sdetweil

@Hubschra01 said in Fresh install but pm2 error:

yeh,
there are two launches,

1 ended at 2020-01-21T16_37_02_810Z
1 still running,

Hubschra01

@sdetweil
I restart the Mirror again an no there are no Errors in the Log. :-)
I can´t post the log because Akismet mark this as span… wierd

Thanks Sam

sdetweil

@Hubschra01 no problem… glad we got it working…

–lines=nnn only shows the last nnn lines, so old errors could be above that