Hubschra01

Hubschra01

Hi,
I use black folie like oracal foil. It’s quit good.

you don’t pause your work at the mirror to wait for the paint it´s dry.
you can use the space behind the foil for wires, the raspsberry …
you can adapt it very quick to another display if your actually is broken or you decide to put a bigger one behind.

Hubschra01

Hi,
I use black folie like oracal foil. It’s quit good.

you don’t pause your work at the mirror to wait for the paint it´s dry.
you can use the space behind the foil for wires, the raspsberry …
you can adapt it very quick to another display if your actually is broken or you decide to put a bigger one behind.

Hubschra01

@sdetweil

I Think the errors come if i reboot the Mirror by

sudo reboot

without to stop the mirror.
the log show

PM2| 2020-01-22T17:48:05: PM2 log: Stop watching MagicMirror
PM2| 2020-01-22T17:48:05: PM2 log: Stopping app:MagicMirror id:0
PM2| 2020-01-22T17:48:05: PM2 log: pid=802 msg=failed to kill - retrying in 100ms
PM2| 2020-01-22T17:48:05: PM2 log: App [MagicMirror:0] exited with code [0] via signal [SIGINT]
PM2| 2020-01-22T17:48:05: PM2 log: pid=802 msg=process killed
PM2| 2020-01-22T17:48:06: PM2 log: PM2 successfully stopped

If i do this

pm2 stop MagicMirror
sudo reboot

after reboot the log show this

PM2| 2020-01-22T17:51:13: PM2 log: pm2 has been killed by signal, dumping process list before exit...
PM2| 2020-01-22T17:51:13: PM2 log: Exited peacefully

I can´t post the log because Akismet mark this as spam… wierd

Hubschra01

@sdetweil
I restart the Mirror again an no there are no Errors in the Log. :-)
I can´t post the log because Akismet mark this as span… wierd

Thanks Sam

Hubschra01

@sdetweil
[TAILING] Tailing last 100 lines for [all] processes (change the value with --lines option)

Hubschra01

@sdetweil
if i understand you right your oppinion is that this error meassage is the shutdown message and not a start up error?

Hubschra01

@sdetweil
The Mirror start an work fine now. :-) Thanks to you
So i have to consider the error in the log as normal?

Hubschra01

@sdetweil
Strange…
I flushed the log and i remove the -x from the run-start.sh.
after reboot i see this in the log again.

/home/pi/.pm2/logs/MagicMirror-error.log last 15 lines:
0|MagicMir | npm ERR! code ELIFECYCLE
0|MagicMir | npm ERR! errno 1
0|MagicMir | npm ERR! magicmirror@2.10.1 start: `./run-start.sh`
0|MagicMir | npm ERR! Exit status 1
0|MagicMir | npm ERR!
0|MagicMir | npm ERR! Failed at the magicmirror@2.10.1 start script.
0|MagicMir | npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
0|MagicMir |
0|MagicMir | npm ERR! A complete log of this run can be found in:
0|MagicMir | npm ERR!     /home/pi/.npm/_logs/2020-01-21T16_37_02_810Z-debug.log

/home/pi/.npm/_logs/2020-01-21T16_37_02_810Z-debug.log
0 info it worked if it ends with ok
1 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'start' ]
2 info using npm@6.13.4
3 info using node@v10.18.1
4 verbose run-script [ 'prestart', 'start', 'poststart' ]
5 info lifecycle magicmirror@2.10.1~prestart: magicmirror@2.10.1
6 info lifecycle magicmirror@2.10.1~start: magicmirror@2.10.1
7 verbose lifecycle magicmirror@2.10.1~start: unsafe-perm in lifecycle true
8 verbose lifecycle magicmirror@2.10.1~start: PATH: /usr/lib/node_modules/npm/node_modules/npm-lifecycle/node-gyp-bin:/home/pi/MagicMirror/node_modules/.bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
9 verbose lifecycle magicmirror@2.10.1~start: CWD: /home/pi/MagicMirror
10 silly lifecycle magicmirror@2.10.1~start: Args: [ '-c', './run-start.sh' ]
11 silly lifecycle magicmirror@2.10.1~start: Returned: code: 1  signal: null
12 info lifecycle magicmirror@2.10.1~start: Failed to exec start script
13 verbose stack Error: magicmirror@2.10.1 start: `./run-start.sh`
13 verbose stack Exit status 1
13 verbose stack     at EventEmitter.<anonymous> (/usr/lib/node_modules/npm/node_modules/npm-lifecycle/index.js:332:16)
13 verbose stack     at EventEmitter.emit (events.js:198:13)
13 verbose stack     at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/npm-lifecycle/lib/spawn.js:55:14)
13 verbose stack     at ChildProcess.emit (events.js:198:13)
13 verbose stack     at maybeClose (internal/child_process.js:982:16)
13 verbose stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
14 verbose pkgid magicmirror@2.10.1
15 verbose cwd /home/pi/MagicMirror
16 verbose Linux 4.19.75-v7+
17 verbose argv "/usr/bin/node" "/usr/bin/npm" "start"
18 verbose node v10.18.1
19 verbose npm  v6.13.4
20 error code ELIFECYCLE
21 error errno 1
22 error magicmirror@2.10.1 start: `./run-start.sh`
22 error Exit status 1
23 error Failed at the magicmirror@2.10.1 start script.
23 error This is probably not a problem with npm. There is likely additional logging output above.
24 verbose exit [ 1, true ]

weird:pouting_face:

Hubschra01

@sdetweil
I think so, if this below is not an Error.
But what caused the error or what was the mistake?

/home/pi/.pm2/logs/MagicMirror-error.log last 15 lines:
0|MagicMir | + arch=armv7l
0|MagicMir | + false=false
0|MagicMir | ++ grep -i serveronly:
0|MagicMir | ++ awk '{print tolower($2)}'
0|MagicMir | ++ tr -d ',"'\'''
0|MagicMir | ++ grep -v '^\s//' config/config.js
0|MagicMir | + serveronly=
0|MagicMir | + serveronly=false
0|MagicMir | ++ pgrep Xorg
0|MagicMir | + xorg=429
0|MagicMir | ++ uname
0|MagicMir | + mac=Linux
0|MagicMir | + '[' false. '!=' false. -o armv7l == armv6l ']'
0|MagicMir | + '[' 429. == . -a Linux '!=' Darwin ']'
0|MagicMir | + electron js/electron.js

Hubschra01

@sdetweil

PM2        | 2020-01-21T11:38:39: PM2 log: Node.js version      : 10.18.1
PM2        | 2020-01-21T11:38:39: PM2 log: Current arch         : arm
PM2        | 2020-01-21T11:38:39: PM2 log: PM2 home             : /home/pi/.pm2
PM2        | 2020-01-21T11:38:39: PM2 log: PM2 PID file         : /home/pi/.pm2/pm2.pid
PM2        | 2020-01-21T11:38:39: PM2 log: RPC socket file      : /home/pi/.pm2/rpc.sock
PM2        | 2020-01-21T11:38:39: PM2 log: BUS socket file      : /home/pi/.pm2/pub.sock
PM2        | 2020-01-21T11:38:39: PM2 log: Application log path : /home/pi/.pm2/logs
PM2        | 2020-01-21T11:38:39: PM2 log: Worker Interval      : 30000
PM2        | 2020-01-21T11:38:39: PM2 log: Process dump file    : /home/pi/.pm2/dump.pm2
PM2        | 2020-01-21T11:38:39: PM2 log: Concurrent actions   : 2
PM2        | 2020-01-21T11:38:39: PM2 log: SIGTERM timeout      : 1600


/home/pi/.pm2/logs/MagicMirror-error.log last 15 lines:
0|MagicMir | + arch=armv7l
0|MagicMir | + false=false
0|MagicMir | ++ grep -i serveronly:
0|MagicMir | ++ awk '{print tolower($2)}'
0|MagicMir | ++ tr -d ',"'\'''
0|MagicMir | ++ grep -v '^\s//' config/config.js
0|MagicMir | + serveronly=
0|MagicMir | + serveronly=false
0|MagicMir | ++ pgrep Xorg
0|MagicMir | + xorg=429
0|MagicMir | ++ uname
0|MagicMir | + mac=Linux
0|MagicMir | + '[' false. '!=' false. -o armv7l == armv6l ']'
0|MagicMir | + '[' 429. == . -a Linux '!=' Darwin ']'
0|MagicMir | + electron js/electron.js

/home/pi/.pm2/logs/MagicMirror-out.log last 15 lines:
0|MagicMir | [11:38:49.100] [LOG]    Module helper loaded: calendar
0|MagicMir | [11:38:49.101] [LOG]    No helper found for module: currentweather.
0|MagicMir | [11:38:49.103] [LOG]    No helper found for module: weatherforecast.
0|MagicMir | [11:38:49.191] [LOG]    Initializing new module helper ...
0|MagicMir | [11:38:49.192] [LOG]    Module helper loaded: newsfeed
0|MagicMir | [11:38:49.193] [LOG]    All module helpers loaded.
0|MagicMir | [11:38:49.195] [LOG]    Starting server on port 8080 ...
0|MagicMir | [11:38:49.218] [LOG]    Server started ...
0|MagicMir | [11:38:49.220] [LOG]    Connecting socket for: updatenotification
0|MagicMir | [11:38:49.222] [LOG]    Connecting socket for: calendar
0|MagicMir | [11:38:49.223] [LOG]    Starting node helper for: calendar
0|MagicMir | [11:38:49.225] [LOG]    Connecting socket for: newsfeed
0|MagicMir | [11:38:49.226] [LOG]    Starting module: newsfeed
0|MagicMir | [11:38:49.227] [LOG]    Sockets connected & modules started ...
0|MagicMir | [11:38:49.889] [LOG]    Launching application.

0|MagicMirror  | [11:38:53.980] [LOG]
0|MagicMirror  | Create new calendar fetcher for url

Hubschra01

No it is only one to see…

pi@raspberrypi:~/MagicMirror $ pm2 status
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0  │ MagicMirror        │ fork     │ 0    │ online    │ 0%       │ 2.4mb    │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@raspberrypi:~/MagicMirror $

Hubschra01

@Hubschra01

Best posts made by Hubschra01

Latest posts made by Hubschra01