PI Zero module issues for this beginner

sdetweil

@wagon40 from the page I referenced

bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)"

you can do that over ssh, or on the pi monitor terminal session

it will prompt you about autostart with pm2 and turning off screensaver

wagon40

@sdetweil
all was going well until the dependencies stopped it. tired to send the code using </> or :: but it blanks out the submit button?

wagon40

@wagon40

npm WARN grunt-stylelint@0.13.0 requires a peer of stylelint@^12.0.0 but none is installed. You must install peer dependencies yourself.

npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! electron-chromedriver@1.8.0 install: `node ./download-chromedriver.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the electron-chromedriver@1.8.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2020-02-05T21_24_22_985Z-debug.log
Unable to install dependencies!

sdetweil

@wagon40 hm… I don’t see that on my pi 0…

And electron is optional, so there should be no need for chrome driver

wagon40

Same issue I had with the other download. any suggestion?


npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! electron-chromedriver@1.8.0 install: `node ./download-chromedriver.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the electron-chromedriver@1.8.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2020-02-05T22_31_04_266Z-debug.log

sdetweil

@wagon40 I will have to look. It will be a couple hours. Have grandson now

wagon40

Tried to npm start and it states that i dont have a config.js. went to the desktop and i can navigate to the magicmirror file and open the config sample. not sure why it isnt loading? did a reboot and it is not starting MM.

sdetweil

@wagon40 because the install didn’t finish… copy config.js.sample to config.js

can u show me the ~/install.log?

other things might fail too… as it didn’t complete the install steps…

i am trying again right now on my pi 0, but on jessie (as thats the OS level I have installed there at the moment)

wagon40

nothing for install.log. tried a few different ways. I was able to make a copy but just a black screen on npm start up. not sure what to do.

wagon40

I ran this command and got that

npm run config:check

npm ERR! code ENOENT
npm ERR! syscall open
npm ERR! path /home/pi/package.json
npm ERR! errno -2
npm ERR! enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm ERR! enoent This is related to npm not being able to find a file.
npm ERR! enoent

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2020-02-06T00_34_33_299Z-debug.log

sdetweil

@wagon40 did u run my script? it creates a log file…

npm run config:check

gotta be IN the MagicMirror folder

to get the base config

cd ~/MagicMirror/config
cp config.js.sample config.js

but the system is a mess right now… hang on I am testing a fixed installer…

wagon40

I appreciate your help and putting up with a noob

pi@raspberrypi:~/MagicMirror/config $ npm run config:check

> magicmirror@2.10.1 config:check /home/pi/MagicMirror
> node tests/configs/check_config.js

Checking file...  /home/pi/MagicMirror/config/config.js
Your configuration file doesn't contain syntax errors :)

sdetweil

erase the current MagicMirror folder (rm -rf MagicMirror )

and run the install script again , they changed some upstream library to hard fail…
but we didn’t need it anyhow…

sdetweil

@wagon40 said in PI Zero module issues for this beginner:

I appreciate your help and putting up with a noob

we were all noobs once…

sdetweil

@sdetweil my test of installer on buster on pi 0, comes up running fine now

wagon40

was able to get it to work. only issues is screensaver continues to active.
tried this with no luck

sudo nano /etc/xdg/lxsession/LXDE/autostart

add the following lines:

@xset s noblank
@xset s off
@xset -dpms
Save and close, using the commands CTRL-O and CTRL-X.

Go to lightdm.conf:

sudo nano /etc/lightdm/lightdm.conf

add the following lines:

xserver-command=X -s 0 -dpms

sdetweil

@wagon40 I noticed that too.

Do this

bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/screensaveroff.sh)"

wagon40

@sdetweil said in PI Zero module issues for this beginner:

bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/screensaveroff.sh)”

looks like it worked! working on a my-commute issue at this time.

sdetweil

@wagon40 thanks… i’ve copied the same process steps over to the installer… thought I had done that.