Read the statement by Michael Teeuw here.
PI Zero module issues for this beginner
-
was able to get it to work. only issues is screensaver continues to active.
tried this with no lucksudo nano /etc/xdg/lxsession/LXDE/autostart
add the following lines:
@xset s noblank
@xset s off
@xset -dpms
Save and close, using the commands CTRL-O and CTRL-X.Go to lightdm.conf:
sudo nano /etc/lightdm/lightdm.conf
add the following lines:
xserver-command=X -s 0 -dpms
-
@wagon40 I noticed that too.
Do this
bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/screensaveroff.sh)" -
@sdetweil said in PI Zero module issues for this beginner:
bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/screensaveroff.sh)”
looks like it worked! working on a my-commute issue at this time.
-
@wagon40 thanks… i’ve copied the same process steps over to the installer… thought I had done that.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login