MMM-AdminPanel get problem
Hello, I applied all steps and follow ipWhiteList rules.
https://github.com/ItayXD/MMM-Admin-Interface![alt text](![image url](![image url](image url)))
When i try in over browser
It says with white screen
Cannot GET /MMM-Admin-Interface/
1- git clone projects
2- adding module in config js
3- My internal Ip is 192.168.0.29
ipWhitelist: [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “192.168.0.29” , “::ffff:192.168.0.29”], // Set  to allow all IP addresses bla bla
Thanks for helping me, what is the point here?
from your pc open the mm?
assuming 192.168.0.29 is your PC address?
@emrah_asl localhost means from this machine, so browser running on mm machine
where do you do this from?
note that the ipWhitelist addresses are not correct
if using ipv4, its address/mask
I usually make ipWhilelist:,
to allow anyone on my local network to access, until I get it the way I want
i added module and default config,
and (my MM on port 8090 as another app is using 8080)
so I would blank out the ipWhitelist to
Yeah you right again ! When I leave blanks ipWhitelist, It is works.
Bu interesting, what should do coorect restrictons about this point.
I’m connecting my rpi over VNC servier with 192.168.0.29 in my windows.
@emrah_asl what is your windows pc IP address
ipWhitelist: [ windows_ip/32 ],
my windows IP is 192.168.2.106, so would be
that means, ipv4 addresses are 32 bits wide (4 chars)
so, allow this address windows_ip, and use all 32 bits for address matching
you can match the local network
windows_ip/24 which would be
any system with address starting with 192.168.0
@emrah_asl also, vnc vs mm. mm implements its own network security . so vnc connection has nothing to do with mm connection