[Electron] display en screen after installing MMM-PIR-Sensor

RIKKO14

ctrl+shift+i on the mirror keyboard : nothing displayed
ctrl+shift+i on my pc keyboard : this is displayed :
Sans titre.png

RIKKO14

ctrl+shift+i on the mirror keyboard : nothing displayed : because my screen is powered off : source of the issue…

sdetweil

@RIKKO14 too small to read

sdetweil

@RIKKO14 i think the ‘failed to read the sensor’ error lead to the power off command being issued…

but don’t know

RIKKO14

https://www.cjoint.com/c/JHvsIkBBC7T

sdetweil

@RIKKO14 that is dev window open on forum page, not MM page

RIKKO14

that’s te problem…
you ask me to do ctrl+shift+i on the mirror keyboard :
but the screen is powered off so nothing displayed, i don’t know if it’s displayed something, I can’t see it…
or i don’t anderstand to acceed MM page with my pc, I have only this :
Sans titre.png

sdetweil

@RIKKO14 edit the config.js on the mirror

change address and ipWhitelist like this

address:"0.0.0.0",
ipWhitelist:[],

restart mm…

now on your pc you can do
http://pi_ip:8080

and then u can open the dev window on that page

i thought you said earlier you had removed the command to make your mirror screen turn off
so you know which code is issuing the command… tell where that was

RIKKO14

But I have only acces to my MM with SSH, so how to edit the config.js on the mirror with ssh ?

sdetweil

@RIKKO14 on the ssh terminal, (its a terminal window, same as works on pi)

cd MagicMirror/config
nano config.js

fix the text (move the cursor with the arrow keys and type and backspace
then ctrl-o to write the changes back out and ctrl -x to exit nano
then type pm2 restart 0

for your windows box, get winscp, then u can connect to pi as both terminal window (for commands)
and a file system view, like windows, double click on folder to go in, or file to edit… use your favorite pc editor (I use notepad++_)