[Electron] display en screen after installing MMM-PIR-Sensor

RIKKO14

hre it is :
https://www.cjoint.com/c/JHvrPBCBgZT

RIKKO14

and this one (because i don’t if it it change something) : https://www.cjoint.com/c/JHvrUegIVzT after the command :

pm2 stop 0
pm2 flush 
pm2 start 0

and after only pm2 logs --lines=100

without pm2 status and pm2 stop 0

sdetweil

@RIKKO14 i see this
0|mm | [2020-08-21 19:37:58.395] [LOG] [LPCM16] WARN: arecord: pcm_read
:2145: erreur en lecture: Appel système interrompu
and this
0|mm | [2020-08-21 19:43:41.435] [LOG] [Error: failed to read sensor]

so we may have to look at t he browser dev window,
ctrl-shift-i on the mirror keyboard
select the tab labebled console,
and scroll up to see any errors, usually in red text

RIKKO14

ctrl+shift+i on the mirror keyboard : nothing displayed
ctrl+shift+i on my pc keyboard : this is displayed :
Sans titre.png

RIKKO14

ctrl+shift+i on the mirror keyboard : nothing displayed : because my screen is powered off : source of the issue…

sdetweil

@RIKKO14 too small to read

sdetweil

@RIKKO14 i think the ‘failed to read the sensor’ error lead to the power off command being issued…

but don’t know

RIKKO14

https://www.cjoint.com/c/JHvsIkBBC7T

sdetweil

@RIKKO14 that is dev window open on forum page, not MM page

RIKKO14

that’s te problem…
you ask me to do ctrl+shift+i on the mirror keyboard :
but the screen is powered off so nothing displayed, i don’t know if it’s displayed something, I can’t see it…
or i don’t anderstand to acceed MM page with my pc, I have only this :
Sans titre.png