Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert

spitzlbergerj

@OberfragGER
Thanks for the compliments!
I will put the radar sensor outside the body either on top or on the bottom. I have printed a white housing for it with the 3D printer, which I can mount accordingly. Let’s see where it responds better

cyberphox

That’s next level stuff right there! Great job!

spitzlbergerj

@cyberphox Thanks for the compliments!

spitzlbergerj

Hi everybody,

and here are the photos of the interior of the right door:

The screen is already fixed through the cutout of the Alu Dibond plate. With a little tape it is actually already fixed enough. For safety I have attached 4 angles, which press it additionally in. The Raspberry is mounted on a 3D printed plate. The cable routing is done via damp room cable boxes.

right door - interieur

spitzlbergerj

Hi all,

you could find a 3D model here

Regards
Josef

lxne

Awesome work!
Are the mirrors just glued onto the doors?
And did you use the chrome spy for both sides?

Best wishes,
Alex (Lower Bavaria)

spitzlbergerj

@lxne Thanks!
yes they are just glued
you see my method of glueing better in this post https://forum.magicmirror.builders/topic/9154/bathroom-magic-mirror
No, I don’t use chrome spy, I bought the mirrors here https://www.glas-star.de/spionspiegelnachmass/chrome-spy-spiegel/