MMM-OpenWeatherForecast - Replacement for MMM-DarkSkyForecast

chris1971

@sdetweil

yes - ich changed the mm.sh after stop all

my method for installation:

format SD card
install Bullseye
install sudo apt-get install xrdp (to get a remote connection via remote desktop)
install your scripts including screensaver/ pm2
install the modules
it worked once … I do not understand what changed after a restart…

sdetweil

@chris1971 and u checked the pm2 status

before doing npm start ?

you don’t reboot after pm2 stop all, as t will restart MM on boot (its job)

chris1971

@sdetweil this is the pm2 status

pi@raspberrypi:~/MagicMirror $ pm2 status
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name │ mode │ ↺ │ status │ cpu │ memory │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0 │ MagicMirror │ fork │ 0 │ online │ 0% │ 2.3mb │

with npm start I only have a black screen in the terminal - I can see the conten in the browser with http://192.168.178.35:8080/

sdetweil

@chris1971 pm2 stop all

then cd ~/MagicMirror

npm start

only can have ONE instance running at a time on the same config.js port: setting

sdetweil

@chris1971 yes, you have another instance running , so this one will fail

sdetweil

@chris1971 said in MMM-OpenWeatherForecast - Replacement for MMM-DarkSkyForecast:

with npm start I only have a black screen in the terminal - I can see the conten in the browser with http://192.168.178.35:8080/

you are looking at the one running under pm2

chris1971

@sdetweil

sdetweil 5 minutes ago

@chris1971 pm2 stop all

then cd ~/MagicMirror

npm start

ahhh… ok: with this I am able to see the scree in the terminal - but the weather module is still not loading in the terminal

Errors like before:

[31.03.2023 17:19.15.233] [LOG] Launching application.
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
…/…/buildtools/third_party/libc++/trunk/include/vector:1425: assertion __n < size() failed: vector[] index out of bounds[2465:0331/171918.392802:ERROR:gpu_process_host.cc(991)] GPU process exited unexpectedly: exit_code=6
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
…/…/buildtools/third_party/libc++/trunk/include/vector:1425: assertion __n < size() failed: vector[] index out of bounds[2465:0331/171919.478457:ERROR:gpu_process_host.cc(991)] GPU process exited unexpectedly: exit_code=6
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
…/…/buildtools/third_party/libc++/trunk/include/vector:1425: assertion __n < size() failed: vector[] index out of bounds[2465:0331/171920.679631:ERROR:gpu_process_host.cc(991)] GPU process exited unexpectedly: exit_code=6
[2509:0331/171921.424506:ERROR:command_buffer_proxy_impl.cc(128)] ContextResult::kTransientFailure: Failed to send GpuControl.CreateCommandBuffer.
[31.03.2023 17:19.25.235] [LOG] Create new calendarfetcher for url: https://calendar.google.com/calendar/ical/c.euro%40gmx.de/private-8dd63e4cddfec3349/basic.ics - Interval: 50000
[31.03.2023 17:19.25.774] [LOG] Create new newsfetcher for url: http://www.radiomuelheim.de/lokalnachrichten.xml - Interval: 300000
[31.03.2023 17:19.25.793] [LOG] Create new newsfetcher for url: http://www.tagesschau.de/xml/rss2 - Interval: 300000
[31.03.2023 17:19.25.813] [LOG] Working notification system. Notification: MMM-GOOGLE_MAPS_TRAFFIC-GET payload: { style: ‘standard’ }

have to go out for a beer now…:dizzy_face:

sdetweil

@chris1971 u have to enter the

export ELECTRON_DISABLE_GPU=1

EVERY time you open a new terminal window

so, then i’d look in the MM screen developers window as previously described

chris1971

@sdetweil I placed the “export ELECTRON_DISABLE_GPU=1” in the install.

Where do I have to place the “export ELECTRON_DISABLE_GPU=1” in the terminal window?

Info from console (red):

>Uncaught TypeError: Cannot read properties of undefined (reading ‘length’)
at script.onload (MMM-GoogleMapsTraffic.js:77:52)
MMM-OpenWeatherForecast.js:685 Uncaught (in promise) TypeError: console.log is not a function
at Class.addIcon (MMM-OpenWeatherForecast.js:685:13)
at Class.processWeatherData (MMM-OpenWeatherForecast.js:370:61)
at Class.socketNotificationReceived (MMM-OpenWeatherForecast.js:282:40)
at module.js:245:9
at Socket. (socketclient.js:38:4)
at Emitter.emit (index.mjs:136:20)
at Socket.emitEvent (socket.js:498:20)
at Socket.onevent (socket.js:485:18)
at MMSocket.socket.onevent (socketclient.js:32:11)
at Socket.onpacket (socket.js:455:22)
js?key=cccc:221 You have included the Google Maps JavaScript API multiple times on this page. This may cause unexpected errors.
js?key=uuuuu:217 Google Maps JavaScript API has been loaded directly without a callback. This is not supported and can lead to race conditions and suboptimal performance. For supported loading patterns please see https://goo.gle/js-api-loading
MMM-GoogleMapsTraffic.js:77 Uncaught TypeError: Cannot read properties of undefined (reading ‘length’)
at script.onload (MMM-GoogleMapsTraffic.js:77:52)

sdetweil

@chris1971 said in MMM-OpenWeatherForecast - Replacement for MMM-DarkSkyForecast:

Where do I have to place the “export ELECTRON_DISABLE_GPU=1” in the terminal window?

you just enter that command string and hit enter

sdetweil

@chris1971 said in MMM-OpenWeatherForecast - Replacement for MMM-DarkSkyForecast:

You have included the Google Maps JavaScript API multiple times on this page. This may cause unexpected errors.

I haven’t seen that one before

I xxx’ed out your api key in the debug info

chris1971

@sdetweil thanks for xxx
What is your recommendation? Delete maps and new install?
Can you explain why I see the MM in the terminal correct, if I stop all and start npm? Is ist possible to delete PM2?

sdetweil

@chris1971 delete pm2, sure, see the

pm2 --help

output

no idea why u are having trouble

try this

instead of npm start
do
npm run server
then access from the remote and see what happens

chris1971

@sdetweil
npm run server - no success

I deleted pm2 - then I was able to start MM from the console without black screen with npm start. But then MM didn’t start on the mirror.

Maybe I will setup a new system tomorrow … thanks for your input until now - cheers

sdetweil

@chris1971 hm… are you trying to display mm on multiple monitors at once?

if so

this is built in function

edit the config.js to allow access from outside the mm machine

address:'0.0.0.0'
ipWhitelist:[],

then on the mm machine, in a terminal window, do

ip addr

and remember that value
then

npm start

then on your other machine, use a browser
(Chrome, Edge, Firefox, Midori, Safari)

and open http://ip_address_from_above:8080

chris1971

@sdetweil
Short summary: I installed MM new with your script - I agreed to the installation of pm2 and disable screensaver. To get a connection to my WIN 10 via remote desktop computer I need to install sudo apt-get install xrdp. Without this installation I’m not able to start the remote desktop connetcion - Only via putty.
After the installation I am not able to run npm start without getting a black screen. I have to pm2 stop all - then npm start again and I see the MM screen on my computer to update the modules, config, etc.
This is what we have seen before:

[31.03.2023 14:13.31.869] [LOG] Starting server on port 8080 …

[31.03.2023 14:13.31.892] [WARN] You’re using a full whitelist configuration to allow for all IPs

[31.03.2023 14:13.31.940] [ERROR] Whoops! There was an uncaught exception…

[31.03.2023 14:13.31.961] [ERROR] Error: listen EADDRINUSE: address already in use 0.0.0.0:8080

at Server.setupListenHandle [as _listen2] (node:net:1432:16)

at listenInCluster (node:net:1480:12)

at doListen (node:net:1629:7)

at process.processTicksAndRejections (node:internal/process/task_queues:84:21) {

code: ‘EADDRINUSE’,

errno: -98,

syscall: ‘listen’,

address: ‘0.0.0.0’,

port: 8080

}

With this error MM is running on the Mirror screen without problems.

When I install MMM-GoogleMapsTraffic I get following message:

npm ERR! code ERESOLVE
npm ERR! ERESOLVE could not resolve
npm ERR!
npm ERR! While resolving: MMM-GoogleMapsTraffic@1.0.0
npm ERR! Found: stylelint@14.16.1
npm ERR! node_modules/stylelint
npm ERR! peer stylelint@“14.x” from grunt-stylelint@0.18.0
npm ERR! node_modules/grunt-stylelint
npm ERR! dev grunt-stylelint@“latest” from the root project
npm ERR!
npm ERR! Could not resolve dependency:
npm ERR! dev stylelint-config-standard@“latest” from the root project
npm ERR!
npm ERR! Conflicting peer dependency: stylelint@15.4.0
npm ERR! node_modules/stylelint
npm ERR! peer stylelint@“^15.4.0” from stylelint-config-standard@32.0.0
npm ERR! node_modules/stylelint-config-standard
npm ERR! dev stylelint-config-standard@“latest” from the root project
npm ERR!
npm ERR! Fix the upstream dependency conflict, or retry
npm ERR! this command with --force, or --legacy-peer-deps
npm ERR! to accept an incorrect (and potentially broken) dependency resolution.
npm ERR!
npm ERR! See /home/pi/.npm/eresolve-report.txt for a full report.

npm ERR! A complete log of this run can be found in:
npm ERR! /home/pi/.npm/_logs/2023-04-01T11_07_55_012Z-debug-0.log

After installation of MMM-GoogleMapsTraffic the Openweather is not loading anymore.

sdetweil

@chris1971 we have two different problems going on.

when u start MagicMirror, it will display on the monitor attached to the system. NOT any remote console.
it IS a mirror on the wall after all

IF you want to show the mirror screen on a remote system, phone, laptop, tablet, desktop
then you use a browser on that other device to show the mm screen from it’s server on the mirror system.

you do not start another running copy of MagicMirror . you do not need rdp to do this.
just a browser.

IF you want to display MagicMirror over your rdp session, then you would open a browser thru the rdp session and use the url
http://localhost:8080
as rdp makes it like you are at the local desktop

I’ll look at the Googlemapstraffic problem

chris1971

@sdetweil many thanks - but I have to install/ modify the Mirror from my computer. That’s the reason why I would like to connect via WIFI and get easy access to the modules/ config, etc.
With Putty I only have access to the terminal - not to the PI Explorer…

Your recommendation is not to install sudo apt-get install xrdp - it seems that this install mekes the trouble with 2 systems…

sdetweil

@chris1971 yes, rdp is fine to access the console.

but from the remote system u just use a browser to see the mm contents

same as if you used putty to edit the config.js

try it. that is the whole point of pm2, start the mirror/web server without user intervention

as u have removed pm2, use putty to logon and npm start. , then disconnect putty

now use your browser on windows to access the mm web server BEFORE STARTING rdp, using the same IP address as you used for putty
and port 8080 (the port number in mm config.js)

if u make a change and restart mm. then hit refresh on the browser page

chris1971

@sdetweil Thanks for your support - a solution for the maps issue would be really nice!!!

The 1st topic with the remote desktop is my minor challenge