starter problem # 2

kurt

Hi
( I guess I put the Raspberry too quick away from the electricity, which caused a total colapse of the Raspberry- so all you newbies like me, beware of that step!).
I open this new topic, because after the new installation of the MM I get this message below and this has nothing to do with the problems in my older topic.
Also tried to google a solution for the npm bugs magicmirror, but couldn’t find a right solution for me.
I just installed MM and only changed the url in the newsfeed and the weather destination in the config.js
So I hope someone here can help me to do the next step.

Thanks a lot
Kurt

pi@raspi:~ $ cd ~/MagicMirror
pi@raspi:~/MagicMirror $ DISPLAY=:O npm start

> magicmirror@2.1.0 start /home/pi/MagicMirror
> electron js/electron.js


npm ERR! Linux 4.4.38-v7+
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "start"
npm ERR! node v6.9.4
npm ERR! npm  v3.10.10
npm ERR! code ELIFECYCLE
npm ERR! magicmirror@2.1.0 start: `electron js/electron.js`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the magicmirror@2.1.0 start script 'electron js/electron.js'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the magicmirror package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     electron js/electron.js
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs magicmirror
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls magicmirror
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/MagicMirror/npm-debug.log
pi@raspi:~/MagicMirror $

tosti007

Did you do npm install in your ~/MagicMirror folder?

kurt

@tosti007
No, I just followed the complete setup tutorial by KirAsh4
so do I have to install it?
Thank you

kurt

@tosti007
That’s what I got

pi@raspi:~ $ cd ~/MagicMirror
pi@raspi:~/MagicMirror $ npm install
npm WARN grunt-yamllint@0.2.0 requires a peer of grunt@~0.4.0 but none was installed.
pi@raspi:~/MagicMirror $

morozgrafix

@kurt are you running raspbian jessie or Jessie lite?

If you are running regular jessie with graphical interface then I believe you need to run npm start in the terminal. DISPLAY=:0 npm start is used when you are connected over SSH from remote system, if I’m not mistaken.

If you are running jessie lite then make sure you have minimal X window GUI installed. Full guide is here https://github.com/MichMich/MagicMirror/wiki/Jessie-Lite-Installation-Guide

kurt

@morozgrafix
Thanks for the help
The for me funny thing is, if I do it with SSH and the DISPLAY=:0 npm startthe MM starts (exept the rss fees and the amer. calender…both loading), but when I try to start it from the Raspberry with the npm start I get some error messages.
When I reboot,the MM routine starts but does not finish and i’m back in The PIXEL surface.
Do you think I should try the Auto Starting Mirror tool?
https://github.com/MichMich/MagicMirror/wiki/Auto-Starting-MagicMirror
Any ideas?
Thanks

morozgrafix

@kurt said in starter problem # 2:

from the Raspberry with the npm start I get some error messages.

What error messages are you getting when you running npm start from the RasPi terminal? (I’m assuming that you still have PIXEL loaded at that time)

I would hold off on auto starting for now, until you can start it cleanly from the shell.

kurt

@morozgrafix
hey by now the MM startet without error massages! kind of strange, but I get used to it.
Then I copied the confi.js file to send it to you, maybe you can find a mistake.
But after that all of my MM folder is gone ! this what happened to me 3 days ago.
Can#t believe, but that’s how it is . everything gone.
I can only blame FileZilla for that. Iguess I have to go to the Install routine for the third time. and I’m thru with Filzilla…
What do you think about it? can I restore something? I searched in all folders but coudn’t find anything.
Man I expected a hard way to go, but this is boring. What to do?
Thanks for waiting
Kurt

kurt

@morozgrafix
here that last try

Last login: Wed Jan 25 19:03:13 on ttys000
Kurt-Matyuss-iMac:~ kurt$ cd ~/MagicMirror
-bash: cd: /Users/kurt/MagicMirror: No such file or directory
Kurt-Matyuss-iMac:~ kurt$ `

too bad

roramirez

Hey @kurt !, the last sentence you are run in your Mac not in your Raspberry