Online Radio

wishmaster270

@tanvir586 I will try to dig deeper the next days but I can not promise that I will have the time.
Maybe I can write a simple wrapper for vlc which ends the process when the streams stops or is unreachable and tries to start the process every few seconds.
Did not find any better solution til now.

wishmaster270

@tanvir586
I release a new version of MMM-MplayerRadio (0.0.10) a few minutes ago which contains a new script called “streamlinkWrapper.bash” script. This script uses the streamlink tool to wrap the stream and restarts it if the connection gets lost.
You will find a example configuration in the examples directory for streamlinkWrapper which contains the configuration needed for your case.

Make sure to install streamlink:

sudo apt -y update && sudo apt -y install streamlink

tanvir586

@wishmaster270 Thank you so much mate. Even if it’s doesn’t work for me I’m still happy that you made this effort for me. I’ll install the latest version today and will install streamlink

tanvir586

@wishmaster270 Just updated. Think I’m doing it right. First I’ve installed the streamlink. And then I went to the MMM-MplayerRadio folder and execute git pull.
I was bit confused about the streamlink. Didn’t understand where to install it , on the MMM-MplayerRadio folder or just normal installation. Finally I installed normally. Hope I’m doing it right.

wishmaster270

@tanvir586
Normal installation is the right thing. If you got sound with the new configuration everything is fine.
Hope the disconnect will be recognized correctly and your stream restarts now.

tanvir586

@wishmaster270 I’m not getting any sound.
config is right?

	{
		module: "MMM-MplayerRadio",
		header: "Radio",
		position: "top_center",
		config: {
			stations: [
				{
					title: "Almubarak",
					url: "https://relay.emasjidlive.uk/almubarakradio",
					logo: "https://almubarakradio.com/wp-content/uploads/2021/04/logorectangle-1024x326.png",
					customCommand: "/home/pi/MagicMirror/modules/MMM-MplayerRadio/scripts/streamlinkWrapper.bash",
					customCommandArgs: ["10", "30", "###URL###"],
				},
			],
		},
	},

I added this line aswell
customCommandArgs: [“-I”,“dummy”, “–http-reconnect”, “–http-continuous”, “###URL###”],

but didn’t work

tanvir586

@tanvir586 If I used this config then the sound works but open vlc in separate windows

{
	module: "MMM-MplayerRadio",
	header: "Radio",
	position: "top_center",
	config: {
		stations: [
			{
				title: "Almubarak",
				url: "https://relay.emasjidlive.uk/almubarakradio",
				logo: "https://almubarakradio.com/wp-content/uploads/2021/04/logorectangle-1024x326.png",

customCommand: “/usr/bin/vlc”,
customCommand: “/home/pi/MagicMirror/modules/MMM-MplayerRadio/scripts/streamlinkWrapper.bash”,
customCommandArgs: [“10”, “30”, “###URL###”],
},
],
},
},

tanvir586

If I use this config then vlc open is separate window and it’s looks like this.

	{
		module: "MMM-MplayerRadio",
		header: "Radio",
		position: "top_center",
		config: {
			stations: [
				{
					title: "Almubarak",
					url: "https://relay.livemasjid.com:8443/activestream",
					logo: "https://almubarakradio.com/wp-content/uploads/2021/04/logorectangle-1024x326.png",
					customCommand: "/home/pi/MagicMirror/modules/MMM-MplayerRadio/scripts/streamlinkWrapper.bash",
					customCommand: "/usr/bin/vlc",
					customCommandArgs: ["10", "30", "###URL###"],
				},
			],
		},
	},

picture ;-
20221025_185152 (1).jpg

wishmaster270

@tanvir586 Sorry, i am not at my pc at the moment. You only need the first customCommand line. The one with vlc is wrong.
You can try to run the run the command directly on the shell and see what happens.

/home/pi/MagicMirror/modules/MMM-MplayerRadio/scripts/streamlinkWrapper.bash 10 30 https://relay.emasjidlive.uk/almubarakradio

You can end it by pressing CRTL+c

tanvir586

@wishmaster270 Hi, it’s says this

tanvir@raspberrypi:~ $ /home/pi/MagicMirror/modules/MMM-MplayerRadio/scripts/streamlinkWrapper.bash 10 30 https://relay.emasjidlive.uk/almubarakradio
bash: /home/pi/MagicMirror/modules/MMM-MplayerRadio/scripts/streamlinkWrapper.bash: No such file or directory