Read the statement by Michael Teeuw here.
cannot get Raspberry pi 2 to run
-
@theaddies yep, can’t run bullseye on armv6l
must be the legacy image, buster
SOOO
reflash SD card w buster and run install againchromium is compiled for armv7, so instructions armv6 doesn’t have, this illegal instruction error
need to add another test to install
-
@sdetweil Oh wow. Sorry for all the trouble. What a pain.
-
@theaddies no worries.
I’ll update install to end if not buster on armv6l,
then u would have known -
@sdetweil Thanks for all the help. I have several pi4s I just want to use the model 2 because the mirror is a perfect application for the older computer.
-
@theaddies understood
-
@sdetweil After I run the install script, what do I do. Since the script disables the screen saver and configures the Mirror to autostart I thought I would not need to do anything else. However, pm2 status all reveals that there is nothing running. I run pm2 status all and it is blank.
I am not sure if I should follow the process in the link below.
https://howchoo.com/g/ntcymzbimjv/how-to-install-magic-mirror-on-your-raspberry-piWhen I reboot the mirror I get the magicmirror2 logo showing up and it seems to be booting up but then the screen goes blank and I have nothing. It is almost like it reboots the pi.
-
@theaddies send me the ~/install.log
and do the same chromium
and
./run-start.sh
testslsb_release -a
to confirm buster
-
@theaddies you should not need to do anything. it should be setup to autostart
-
lsb_release -a No LSB modules are available. Distributor ID: Raspbian Description: Raspbian GNU/Linux 10 (buster) Release: 10 Codename: buster -
@sdetweil for which chromium or which chromium-browswer I get nothing returned.
-
@theaddies interesting, log says one of them got installed
Unpacking chromium-browser (92.0.4515.98~buster-rpt2)
note u had an extra w in the text on last message
browswer
pm2 setup for autostart having trouble…you do
pm2 autostart
and it gives you the command to execute to make that happenthen it says it can’t find the systemd init system to update, after it just said that is the one to use…
will have to research and debug -
pi@raspberrypi:~/MagicMirror $ ./run-start.sh [07.04.2023 22:00.28.274] [LOG] Starting MagicMirror: v2.23.0 [07.04.2023 22:00.28.488] [LOG] Loading config ... [07.04.2023 22:00.28.652] [DEBUG] config template file not exists, no envsubst [07.04.2023 22:00.28.853] [LOG] Loading module helpers ... [07.04.2023 22:00.28.933] [LOG] No helper found for module: alert. [07.04.2023 22:00.29.513] [LOG] Initializing new module helper ... [07.04.2023 22:00.29.565] [LOG] Module helper loaded: updatenotification [07.04.2023 22:00.29.597] [LOG] No helper found for module: clock. [07.04.2023 22:00.29.659] [WARN] No /home/pi/MagicMirror/js/../modules/calendar_monthly/calendar_monthly.js found for module: calendar_monthly. [07.04.2023 22:00.29.722] [LOG] No helper found for module: calendar_monthly. [07.04.2023 22:00.41.528] [LOG] Initializing new module helper ... [07.04.2023 22:00.41.561] [LOG] Module helper loaded: calendar [07.04.2023 22:00.41.616] [WARN] No /home/pi/MagicMirror/js/../modules/random_quotes/random_quotes.js found for module: random_quotes. [07.04.2023 22:00.41.664] [LOG] No helper found for module: random_quotes. [07.04.2023 22:00.41.707] [LOG] No helper found for module: weather. [07.04.2023 22:00.42.663] [LOG] Initializing new module helper ... [07.04.2023 22:00.42.687] [LOG] Module helper loaded: newsfeed [07.04.2023 22:00.42.732] [WARN] No /home/pi/MagicMirror/js/../modules/MMM-Snow/MMM-Snow.js found for module: MMM-Snow. [07.04.2023 22:00.42.749] [LOG] No helper found for module: MMM-Snow. [07.04.2023 22:00.42.786] [WARN] No /home/pi/MagicMirror/js/../modules/MMM-Unsplash/MMM-Unsplash.js found for module: MMM-Unsplash. [07.04.2023 22:00.42.814] [LOG] No helper found for module: MMM-Unsplash. [07.04.2023 22:00.42.841] [LOG] All module helpers loaded. [07.04.2023 22:00.43.422] [LOG] Starting server on port 8080 ... [07.04.2023 22:00.44.420] [LOG] Server started ... [07.04.2023 22:00.44.470] [LOG] Connecting socket for: updatenotification [07.04.2023 22:00.44.531] [LOG] Starting module helper: updatenotification [07.04.2023 22:00.44.568] [LOG] Connecting socket for: calendar [07.04.2023 22:00.44.598] [LOG] Starting node helper for: calendar [07.04.2023 22:00.44.642] [LOG] Connecting socket for: newsfeed [07.04.2023 22:00.44.672] [LOG] Starting node helper for: newsfeed [07.04.2023 22:00.44.709] [LOG] Sockets connected & modules started ... [07.04.2023 22:00.44.744] [LOG] Ready to go! Please point your browser to: http://localhost:8080 Starting chromium browser now, have patience, it takes a minuteThe screen for the raspberry pi is blank. this output is from ssh.
I just typed it again and now I get
/usr/bin/chromium-broswersorry about that.
-
@theaddies screen black, yes, takes long time
increase swap space helps some
use Midori browser helps some more (have to install Midori, and set an env variable, see doc )
-
@sdetweil The screen has been black for an hour. When i reboot, the first thing I see is the MagicMirror logo. That is different than before. Before it booted into the raspian desktop and then the magicmirror loaded. It did take a while. Now, as I said above, I see the MagicMirror logo it seems to be loading and then the screen goes blank. It does not come back. ssh works, but the keyboard and mouse on the pi itself will not wake it up.
I did see the correct screen after I ran the command below, but I can’t do that now.
DISPLAY=:0 npm start -
@theaddies pm2 is not working for autostart for some reason
-
@theaddies reboot, then run the fixuppm2 script from my scripts page…
let me know
-
@theaddies ok, I was able to reproduce the problem
after reboot do this
pm2 startup
it will return a command to execute
copy paste that command and hit enter
it worked for me to manually enter the command
i opened this issue in pm2
https://github.com/Unitech/pm2/issues/5582 -
@theaddies i updated the install script to fail if the system is bullseye and this is an armv6l device
-
@sdetweil I cannot get the pi to display anything via hdmi. my only access to it now is via ssh.
-
@theaddies eh? not even the desktop?
I installed fresh on my pi0w, (all via ssh) and after fixing the pm2 issue it autostarts mm as expected
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login