cannot get Raspberry pi 2 to run

[theaddies]

@sdetweil

/usr/bin/chromium-browser
Illegal Instruction

[sdetweil]

@theaddies ok, so there is that problem

oh, which raspi os image are you using?

MUST be the legacy image, 32 bit

lsb_release - a

will tell us

if buster is legacy

[theaddies]

@sdetweil ```
No LSB modules are available.
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseye

[sdetweil]

@theaddies yep, can’t run bullseye on armv6l

must be the legacy image, buster

SOOO
reflash SD card w buster and run install again

chromium is compiled for armv7, so instructions armv6 doesn’t have, this illegal instruction error

need to add another test to install

[theaddies]

@sdetweil Oh wow. Sorry for all the trouble. What a pain.

[sdetweil]

@theaddies no worries.

I’ll update install to end if not buster on armv6l,
then u would have known

[theaddies]

@sdetweil Thanks for all the help. I have several pi4s I just want to use the model 2 because the mirror is a perfect application for the older computer.

[sdetweil]

@theaddies understood

[theaddies]

@sdetweil After I run the install script, what do I do. Since the script disables the screen saver and configures the Mirror to autostart I thought I would not need to do anything else. However, pm2 status all reveals that there is nothing running. I run pm2 status all and it is blank.

I am not sure if I should follow the process in the link below.
https://howchoo.com/g/ntcymzbimjv/how-to-install-magic-mirror-on-your-raspberry-pi

When I reboot the mirror I get the magicmirror2 logo showing up and it seems to be booting up but then the screen goes blank and I have nothing. It is almost like it reboots the pi.

[sdetweil]

@theaddies send me the ~/install.log

and do the same chromium
and
./run-start.sh
tests

lsb_release -a

to confirm buster