Read the statement by Michael Teeuw here.
cannot get Raspberry pi 2 to run
-
@sdetweil The screen has been black for an hour. When i reboot, the first thing I see is the MagicMirror logo. That is different than before. Before it booted into the raspian desktop and then the magicmirror loaded. It did take a while. Now, as I said above, I see the MagicMirror logo it seems to be loading and then the screen goes blank. It does not come back. ssh works, but the keyboard and mouse on the pi itself will not wake it up.
I did see the correct screen after I ran the command below, but I can’t do that now.
DISPLAY=:0 npm start -
@theaddies pm2 is not working for autostart for some reason
-
@theaddies reboot, then run the fixuppm2 script from my scripts page…
let me know
-
@theaddies ok, I was able to reproduce the problem
after reboot do this
pm2 startup
it will return a command to execute
copy paste that command and hit enter
it worked for me to manually enter the command
i opened this issue in pm2
https://github.com/Unitech/pm2/issues/5582 -
@theaddies i updated the install script to fail if the system is bullseye and this is an armv6l device
-
@sdetweil I cannot get the pi to display anything via hdmi. my only access to it now is via ssh.
-
@theaddies eh? not even the desktop?
I installed fresh on my pi0w, (all via ssh) and after fixing the pm2 issue it autostarts mm as expected
-
@sdetweil I just followed the procedure on a pi4 and everything worked great.
-
@theaddies cool
my pi0w test
flash sd card with legacy full desktop, 32gb sd card
edit the wap_supplicant file to enable wifi
boot
auto run update
enable ssh
change machine name (add a 0) (have others running on the network , pi3, pi4, pi42…)reboot
logon via ssh
paste my install script url
run
select yes to pm2
select yes to screen saver offpm2 install failed
fixuppm2 script failedreboot
logon via ssh
run the pm2 startup command
copy/paste the output to execute pm2 setup again
worked this time
run fixuppm2 to add mm as an app…mm starts
reboot
mm starts
-
@sdetweil I am loathed to start the pi2 over again for the fourth time. here is what I have right now. I think I got MagicMirror and mm removed from the pm2. I installed mm when I thought things were not working.
The HDMI output still does not work. I was thinking now I would run the pm2 startup command although I am sure I already did it and then I would run fixuppm2.
