cannot get Raspberry pi 2 to run

theaddies

@sdetweil I am loathed to start the pi2 over again for the fourth time. here is what I have right now. I think I got MagicMirror and mm removed from the pm2. I installed mm when I thought things were not working.

The HDMI output still does not work. I was thinking now I would run the pm2 startup command although I am sure I already did it and then I would run fixuppm2.

theaddies

@theaddies

sdetweil

@theaddies yes, it says spawining, so pm2 is not set to autostart

do

pm2 startup

it will output a command string, copy paste that command string (last line) and hit enter,
DO NOT USE MINE BELOW

pi@raspberrypi0:~ $ pm2 startup
[PM2] Init System found: systemd
[PM2] To setup the Startup Script, copy/paste the following command:
sudo env PATH=$PATH:/usr/local/bin /usr/local/lib/node_modules/pm2/bin/pm2 startup systemd -u pi --hp /home/pi

note the error in your post of running my fixuppm2 script
init system not found

THAT is the problem… for some reason it cannot figure out HOW to do the correct startup stuff…
BUT it just said what type to use…

theaddies

@sdetweil OK So I went ahead and did the whole thing over again for the fourth time with the exact method you outlined. It works. It would be nice to somehow let the next poor sod who wants to waste 2 days of their life of the right way to do this on a pi2.

sdetweil

@theaddies I am trying to get a fix for pm2. not our code, so nothing we can force

glad u got it working