MagicMirror With Face Recognition

[OliWer]

This looks pretty cool. Nice work with the styling.
Can you let me know which hardware you are using? Like the sensors and where is MM running on?

[Snille]

Nicely done!
What computer hardware are you using? RPi5?

[mchan]

@Snille @OliWer Here is the hardware for the project:

• Raspberry Pi 4
• Raspberry Pi Camera Module 3 (used for face recognition)
• GroveGesture Sensor (Used for swipe commands)
• I think the mirror was originally from IKEA. I swapped out the mirror with a piece of MirrorView glass

[monark]

@mchan hi man, is awesome mirror.
Can you explain how you did it with opencv?
i get to the point of installing that and then i stop and it messes up the system and i have to do it all over again every time. i use an rpi4 and now i have a v3 camera, before i had a v2 camera.
thank you for answer me

[cyberphox]

Get a GitHub and share that config! Wow!

[sdetweil]

@monark MMM-FaceReco-DNN has the whole setup to use CV and face database

[monark]

@sdetweil my cmd error

pip install face-recognition numpy dlib picamera2 opencv-python
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting face-recognition
  Downloading https://www.piwheels.org/simple/face-recognition/face_recognition-1.3.0-py2.py3-none-any.whl (15 kB)
Requirement already satisfied: numpy in /usr/lib/python3/dist-packages (1.19.5)
Collecting dlib
  Downloading https://www.piwheels.org/simple/dlib/dlib-19.24.6-cp39-cp39-linux_armv7l.whl (3.4 MB)
     |################################| 3.4 MB 1.3 MB/s 
Requirement already satisfied: picamera2 in /usr/lib/python3/dist-packages (0.3.12)
Collecting opencv-python
  Downloading opencv-python-4.10.0.84.tar.gz (95.1 MB)
     |################################| 95.1 MB 59 kB/s 
  Installing build dependencies ... done
  Getting requirements to build wheel ... done
    Preparing wheel metadata ... done
Requirement already satisfied: Pillow in /usr/lib/python3/dist-packages (from face-recognition) (8.1.2)
Collecting face-recognition-models>=0.3.0
  Downloading https://www.piwheels.org/simple/face-recognition-models/face_recognition_models-0.3.0-py2.py3-none-any.whl (100.6 MB)
     |################################| 100.6 MB 83 kB/s 
Requirement already satisfied: Click>=6.0 in /usr/lib/python3/dist-packages (from face-recognition) (7.1.2)
Requirement already satisfied: v4l2-python3 in /usr/lib/python3/dist-packages (from picamera2) (0.3.2)
Building wheels for collected packages: opencv-python
  Building wheel for opencv-python (PEP 517) ... error
  ERROR: Command errored out with exit status 1:
   command: /usr/bin/python3 /tmp/tmpxl4fq1u5_in_process.py build_wheel /tmp/tmpdgg843yi
       cwd: /tmp/pip-install-681jn0xe/opencv-python_e610009f30624d9ea2b1e3ef82a9824f
  Complete output (11 lines):
  patching file opencv/3rdparty/openexr/IlmImf/ImfSystemSpecific.cpp
  /tmp/pip-build-env-im9uh8sr/overlay/lib/python3.9/site-packages/cmake/data/bin/cmake: error while loading shared libraries: libssl.so.3: cannot open shared object file: No such file or directory
  Traceback (most recent call last):
    File "/tmp/pip-build-env-im9uh8sr/overlay/lib/python3.9/site-packages/skbuild/setuptools_wrap.py", line 639, in setup
      cmkr = cmaker.CMaker(cmake_executable)
    File "/tmp/pip-build-env-im9uh8sr/overlay/lib/python3.9/site-packages/skbuild/cmaker.py", line 145, in __init__
      self.cmake_version = get_cmake_version(self.cmake_executable)
    File "/tmp/pip-build-env-im9uh8sr/overlay/lib/python3.9/site-packages/skbuild/cmaker.py", line 102, in get_cmake_version
      raise SKBuildError(msg) from err
  
  Problem with the CMake installation, aborting build. CMake executable is /tmp/pip-build-env-im9uh8sr/overlay/lib/python3.9/site-packages/cmake/data/bin/cmake
  ----------------------------------------
  ERROR: Failed building wheel for opencv-python
Failed to build opencv-python
ERROR: Could not build wheels for opencv-python which use PEP 517 and cannot be installed directly

[monark]

@sdetweil maybe the problem is i have libcamera-still (rpi4, bulleye, 32bit, camera v3)

[sdetweil]

@monark library missing

[monark]

@sdetweil it’s strange because I’ve updated everything