Electron quit periodically

[sdetweil]

@jefftse ok, this is related to the Wayland compositor

can you switch back to X11

use the raspi-config app

sudo raspi-config

advanced

Wayland

X11

you will have to reboot after that

[jefftse]

@sdetweil ok, i just did it and will report back. I guess i lost VNC from switching.

[jefftse]

@sdetweil it did just crash with this

0|mm | /home/jeff/MagicMirror/node_modules/electron/dist/electron exited with signal SIGSEGV
PM2 | App [mm:0] exited with code [1] via signal [SIGINT]
PM2 | App [mm:0] starting in -fork mode-
PM2 | App [mm:0] online
0|mm | > magicmirror@2.29.0 start
0|mm | > DISPLAY=“${DISPLAY:=:0}” ./node_modules/.bin/electron js/electron.js

[sdetweil]

@jefftse different vnc setup on x11

i use ssh to avoid all this graphical crud.

see this topic on using other tools from Windows
https://forum.magicmirror.builders/topic/19193/best-way-to-develop-from-windows-machine

[sdetweil]

@jefftse said in Electron quit periodically:

0|mm | /home/jeff/MagicMirror/node_modules/electron/dist/electron exited with signal SIGSEGV

what was before that line?

[jefftse]

@sdetweil 0|mm | MEMORY-ERROR: electron[3627]: GSlice: assertion failed: sinfo->n_allocated > 0
0|mm | /home/jeff/MagicMirror/node_modules/electron/dist/electron exited with signal SIGABRT

[sdetweil]

@jefftse ok, the issues I found referencing that problem all resulted in app code failure (using parms wrong, not freeing memory, a faulty image format, …) not electron problems…

I don’t see an module doing graphics in your setup… but I don’t know what they all do exactly…

[jefftse]

@sdetweil my setup is pretty simple and its freshly built yesterday. here is my config…

deleted

[sdetweil]

@jefftse please use code marker around logs and config

paste the text into the forum editor, blank line above and below
select the text you pasted
push the </> button

as I said, I don’t SEE anything causing this…

but…

only way is to disable one module at a time to see if we can find it

add

disabled:true,

after the module: line

[jefftse]

@sdetweil I might have found the problem. it’s the backgroundslideshow. I disabled resizing and it hasn’t crashed yet. we will report again!

[sdetweil]

@jefftse cool…

[karsten13]

@jefftse

I deleted your config posted above because you published all your secrets in it …

[jefftse]

@karsten13 Ha! thank you!!! i totally overlooked it!! appreciated it!

[jefftse]

@sdetweil

my setup is pretty simple.