Is adding Home Assistant the right way to go?

British_Kiwi

@sdetweil the default calendar isn’t working either! I have commented out ext3, I have reduced the calendar entries on the default calendar to just Australian holidays in case Google is having a fit! It just says loading. I had not touched any of this code in the config at all. I have seen there have been cases of calendar’s not loading last January and few again now. Is it worth me raising it on the github discussion or issue list?

https://github.com/MMRIZE/MMM-CalendarExt3/issues ?

sdetweil

@British_Kiwi can you look at the output of npm start to see if an error is reported

British_Kiwi

@sdetweil not sure if I am doing this right. I thought I had made notes about how to check logs etc, but after some googling I have this (which I don’t think you were after):

admin@raspberrypihome:~/MagicMirror $ npm run config:check

> magicmirror@2.33.0 config:check
> node js/check_config.js

[2025-10-10 07:21:14.145] [INFO]  Checking config file /home/admin/MagicMirror/config/config.js ...
[2025-10-10 07:21:14.197] [INFO]  Your configuration file doesn't contain syntax errors :)
[2025-10-10 07:21:14.198] [INFO]  Checking modules structure configuration ...
[2025-10-10 07:21:14.258] [ERROR] This module configuration contains errors:
undefinedmust be object

Not too sure which module this is referring too.

Here are the pm2 logs. I’ve removed yesterdays stuff. All I have done this morning is pm2 restart 0 --updated-env (as it keeps saying something about environment variables which I haven’t seen prior to a few days ago.

admin@raspberrypihome:~/MagicMirror $ pm2 logs
[TAILING] Tailing last 15 lines for [all] processes (change the value with --lines option)
/home/admin/.pm2/pm2.log last 15 lines:
PM2        | 2025-10-10T07:15:02: PM2 log: Stopping app:MagicMirror id:0
PM2        | 2025-10-10T07:15:03: PM2 log: App [MagicMirror:0] exited with code [0] via signal [SIGINT]
PM2        | 2025-10-10T07:15:03: PM2 log: pid=617000 msg=process killed
PM2        | 2025-10-10T07:15:03: PM2 log: App [MagicMirror:0] starting in -fork mode-
PM2        | 2025-10-10T07:15:03: PM2 log: App [MagicMirror:0] online

/home/admin/.pm2/logs/MagicMirror-error.log last 15 lines:
0|MagicMir | [2025-10-10 07:15:04.251] [ERROR] This module configuration contains errors:
0|MagicMir | undefinedmust be object
0|MagicMir | [2025-10-10 07:15:04.252] [ERROR] WARNING! Could not load config file. Starting with default configuration. Error found: TypeError: Cannot read properties of undefined (reading 'module')

/home/admin/.pm2/logs/MagicMirror-out.log last 15 lines:
0|MagicMir | - VERSIONS: electron: 38.1.2; used node: 22.19.0; installed node: 22.18.0; npm: 10.9.3; pm2: 6.0.13
0|MagicMir | - ENV:      XDG_SESSION_TYPE: tty; MM_CONFIG_FILE: undefined
0|MagicMir |             WAYLAND_DISPLAY:  wayland-0; DISPLAY: :0; ELECTRON_ENABLE_GPU: undefined
0|MagicMir | - RAM:      total: 8059.20 MB; free: 6557.28 MB; used: 1501.92 MB

It does it look like there is an issue with a module, but I can’t work out which module. Any ideas on how to work it out?

At the moment I have commented out calendarext3, home assistant display, but I do have iframe showing on one of the pages.

sdetweil

@British_Kiwi if you start a private chat with me, you can paste your config and I will look at it. I agree on the ‘this’ module is unclear!..

sent you a message

sdetweil

@British_Kiwi said in Is adding Home Assistant the right way to go?:

This module configuration contains errors:
undefinedmust be object

accidental extra comma between modules (commented out module, but the trailing comma was on a sep line)

    { 
     module:"foo",
    }.
     .    <--- that guy
    {
      module:"bar",
    }

this is a bug,
opened issue
https://github.com/MagicMirrorOrg/MagicMirror/issues/3910

as a separate way to avoid this, you can add

   disable:true,

after the module: line
to disable a module without having to comment it out

disabled: false,

makes it active again