Read the statement by Michael Teeuw here.
Home Assistant Sensor
-
Re: MMM-HomeAssistant-Sensors (Development) - Show your HA Sensors on your Mirror
Hello all
looking for some help with Home assistant sensor
I’m getting “Error Fetching Stats” on the Magic Mirror
My Config is below{ module: 'MMM-homeassistant-sensors', position: 'bottom_left', config: { host: "10.10.28.134", port: "8123", https: false, token: "My Token" values: [ { sensor: "status.14928_acurite_00275rm_14928_t1", }, { sensor: "status.14928_acurite_00275rm_14928_b", }, ] }I have tried using a host name instead of the IP address same issue
If anyone has any thoughts please let me know
Thanks
-
@ChrisKelley can you look at the output where you start MM
if that is pm2, thenpm2 logs --lines=xxxx
xxxx is the number of most recent lines, default 15on another module to my HA
[2025-12-03 08:29:00.425] [INFO] [MMM-HomeAssistantDisplay] [ 'Conected to Home Assistant for module_20_MMM-HomeAssistantDisplay after 0 retries' ]one other thing, for config and logs, please use a code wrapper around the content
paste into editor, blank line above and below
select the text you just pasted, hit the </> button on the editor toolbar above
or manually
add a tripple backtic (left of the 1 key on the US keyboard) as the only chars on the line (the blank line above and below) -
Thanks for the fast response… here is the log file
0|MagicMir | [2025-12-03 13:22:44.738] [LOG] MMM-homeassistant-sensors - Connection Failed: undefined 0|MagicMir | [2025-12-03 13:23:11.668] [LOG] SONOS_UPDATE 0|MagicMir | [2025-12-03 13:23:35.496] [LOG] SONOS_UPDATE 0|MagicMir | [2025-12-03 13:23:38.618] [LOG] MMM-homeassistant-sensors - Connection Failed: undefined 0|MagicMir | [2025-12-03 13:23:41.668] [LOG] SONOS_UPDATE 0|MagicMir | [2025-12-03 13:23:44.748] [LOG] MMM-homeassistant-sensors - Connection Failed: undefined 0|MagicMir | [2025-12-03 13:24:11.668] [LOG] SONOS_UPDATE 0|MagicMir | [2025-12-03 13:24:35.713] [LOG] SONOS_UPDATE 0|MagicMir | [2025-12-03 13:24:38.845] [LOG] MMM-homeassistant-sensors - Connection Failed: undefined 0|MagicMir | [2025-12-03 13:24:41.668] [LOG] SONOS_UPDATE 0|MagicMir | [2025-12-03 13:24:44.818] [LOG] MMM-homeassistant-sensors - Connection Failed: undefined 0|MagicMir | [2025-12-03 13:24:59.257] [INFO] Newsfeed-Fetcher: Broadcasting 60 items. 0|MagicMir | [2025-12-03 13:24:59.258] [INFO] Newsfeed-Fetcher: Broadcasting 60 items. 0|MagicMir | [2025-12-03 13:25:03.630] [INFO] Newsfeed-Fetcher: Broadcasting 30 items. 0|MagicMir | [2025-12-03 13:25:11.669] [LOG] SONOS_UPDATE -
@ChrisKelley based on that error which I can’t see in the code
I think its one of two things
ipaddress of HA wrong
token to HA wrongcan you set this config option for the module
debuglogging:true,and recapture the log…
-
Ok… So i added the logging line as well as added .local to the url… this changed things see below… Still not working but error on screen is gone
chris@MagicMirror:~ $ pm2 logs [TAILING] Tailing last 15 lines for [all] processes (change the value with --lin es option) /home/chris/.pm2/pm2.log last 15 lines: PM2 | 2025-12-03T08:14:38: PM2 log: pid=4758 msg=process killed PM2 | 2025-12-03T08:14:38: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2025-12-03T08:14:38: PM2 log: App [MagicMirror:0] online PM2 | 2025-12-03T14:27:30: PM2 log: Change detected on path MagicMirror/c onfig/config.js for app MagicMirror - restarting PM2 | 2025-12-03T14:27:30: PM2 log: Stopping app:MagicMirror id:0 PM2 | 2025-12-03T14:27:30: PM2 log: App [MagicMirror:0] exited with code [0] via signal [SIGINT] PM2 | 2025-12-03T14:27:30: PM2 log: pid=5225 msg=process killed PM2 | 2025-12-03T14:27:30: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2025-12-03T14:27:30: PM2 log: App [MagicMirror:0] online PM2 | 2025-12-03T15:00:50: PM2 log: Change detected on path MagicMirror/c onfig/config.js for app MagicMirror - restarting PM2 | 2025-12-03T15:00:50: PM2 log: Stopping app:MagicMirror id:0 PM2 | 2025-12-03T15:00:50: PM2 log: App [MagicMirror:0] exited with code [0] via signal [SIGINT] PM2 | 2025-12-03T15:00:50: PM2 log: pid=9835 msg=process killed PM2 | 2025-12-03T15:00:50: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2025-12-03T15:00:50: PM2 log: App [MagicMirror:0] online /home/chris/.pm2/logs/sonos-out.log last 15 lines: 1|sonos | 2025-12-03T12:51:12.492Z INFO Could not find file /home/chris/node- sonos-http-api/settings.json 1|sonos | 2025-12-03T12:51:12.696Z INFO Presets loaded: { 1|sonos | example: { 1|sonos | players: [ 1|sonos | { roomName: 'Bathroom', volume: 10 }, 1|sonos | { roomName: 'Kitchen', volume: 10 }, 1|sonos | { roomName: 'Office', volume: 10 }, 1|sonos | { roomName: 'Bedroom', volume: 10 }, 1|sonos | { roomName: 'TV Room', volume: 15 } 1|sonos | ], 1|sonos | playMode: { shuffle: true, repeat: 'all', crossfade: false }, 1|sonos | pauseOthers: false 1|sonos | } 1|sonos | } 1|sonos | 2025-12-03T12:51:13.727Z INFO http server listening on 0.0.0.0 port 5005 /home/chris/.pm2/logs/sonos-error.log last 15 lines: 1|sonos | Please migrate your code to use AWS SDK for JavaScript (v3). 1|sonos | For more information, check the blog post at https://a.co/cUPnyil 1|sonos | (Use `node --trace-warnings ...` to show where the warning was crea ted) 1|sonos | (node:985) NOTE: The AWS SDK for JavaScript (v2) is in maintenance mode. 1|sonos | SDK releases are limited to address critical bug fixes and securit y issues only. 1|sonos | 1|sonos | Please migrate your code to use AWS SDK for JavaScript (v3). 1|sonos | For more information, check the blog post at https://a.co/cUPnyil 1|sonos | (Use `node --trace-warnings ...` to show where the warning was crea ted) 1|sonos | (node:1035) NOTE: The AWS SDK for JavaScript (v2) is in maintenance mode. 1|sonos | SDK releases are limited to address critical bug fixes and securit y issues only. 1|sonos | 1|sonos | Please migrate your code to use AWS SDK for JavaScript (v3). 1|sonos | For more information, check the blog post at https://a.co/cUPnyil 1|sonos | (Use `node --trace-warnings ...` to show where the warning was crea ted) /home/chris/.pm2/logs/MagicMirror-error.log last 15 lines: 0|MagicMir | [2025-12-03 14:56:32.970] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states 0|MagicMir | [2025-12-03 14:56:35.439] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states 0|MagicMir | [2025-12-03 14:57:32.971] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states 0|MagicMir | [2025-12-03 14:57:35.435] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states 0|MagicMir | [2025-12-03 14:58:32.971] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states 0|MagicMir | [2025-12-03 14:58:35.456] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states 0|MagicMir | [2025-12-03 14:59:32.970] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states 0|MagicMir | [2025-12-03 14:59:35.446] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states 0|MagicMir | [2025-12-03 15:00:32.970] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states 0|MagicMir | [2025-12-03 15:00:35.444] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states 0|MagicMir | /home/chris/MagicMirror/node_modules/electron/dist/electron exited with signal SIGINT 0|MagicMir | [2025-12-03 15:00:52.085] [WARN] You're using a full whitelist con figuration to allow for all IPs 0|MagicMir | [2025-12-03 15:00:55.458] [ERROR] [MMM-Remote-Control] Could not fi nd main module js file for MMM-homeassistant-sensors-old 0|MagicMir | [2025-12-03 15:01:35.732] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states 0|MagicMir | [2025-12-03 15:02:35.439] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states -
@ChrisKelley can you show the end of the error—- build lines
-
Lets see if this is better… When I hit the </> button it moves half the code hard right…
@sde/home/chris/.pm2/logs/MagicMirror-error.log last 15 lines:
0|MagicMir | [2025-12-03 15:00:35.444] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | /home/chris/MagicMirror/node_modules/electron/dist/electron exited with signal SIGINT
0|MagicMir | [2025-12-03 15:00:52.085] [WARN] You’re using a full whitelist con figuration to allow for all IPs
0|MagicMir | [2025-12-03 15:00:55.458] [ERROR] [MMM-Remote-Control] Could not fi nd main module js file for MMM-homeassistant-sensors-old
0|MagicMir | [2025-12-03 15:01:35.732] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:02:35.439] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:03:35.542] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:04:35.450] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:05:35.449] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:06:35.564] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:07:35.437] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:08:35.680] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:09:35.585] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:10:35.488] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:11:36.010] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
tweil -
@ChrisKelley did you change the config to .local??
Can you ping that from the MagicMirror system
i have grandson duty for 2 hours now
Then I will install that module -
Yep that works…
chris@MagicMirror:~ $ ping 10.10.28.134
PING 10.10.28.134 (10.10.28.134) 56(84) bytes of data.
64 bytes from 10.10.28.134: icmp_seq=1 ttl=64 time=0.027 ms
64 bytes from 10.10.28.134: icmp_seq=2 ttl=64 time=0.032 ms
64 bytes from 10.10.28.134: icmp_seq=3 ttl=64 time=0.029 ms
64 bytes from 10.10.28.134: icmp_seq=4 ttl=64 time=0.062 ms
64 bytes from 10.10.28.134: icmp_seq=5 ttl=64 time=0.036 ms
64 bytes from 10.10.28.134: icmp_seq=6 ttl=64 time=0.035 ms
64 bytes from 10.10.28.134: icmp_seq=7 ttl=64 time=0.022 ms
64 bytes from 10.10.28.134: icmp_seq=8 ttl=64 time=0.022 ms
64 bytes from 10.10.28.134: icmp_seq=9 ttl=64 time=0.025 ms
64 bytes from 10.10.28.134: icmp_seq=10 ttl=64 time=0.025 mscode_text -
@ChrisKelley ping by name?
-
Yep sorry that makes more sense
chris@MagicMirror:~ $ ping homeassistant.local
PING homeassistant.local (10.10.28.211) 56(84) bytes of data.
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=1 ttl=64 time=2.91 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=2 ttl=64 time=3.81 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=3 ttl=64 time=4.07 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=4 ttl=64 time=3.88 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=5 ttl=64 time=1.18 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=6 ttl=64 time=3.95 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=7 ttl=64 time=4.10 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=8 ttl=64 time=1.52 ms -
@ChrisKelley no issue, it’s useful as we know it generates the same address
-
@ChrisKelley so I installed, did npm install in the module folder
here is my config , two sensors from my entities list in HAso now all I can think is your token string is bad…
{ module: 'MMM-homeassistant-sensors', position: 'top_left', classes: "page4", config: { host: "homeassistant.local", port: "8123", https: false, token: " my fresh token ", values: [ { sensor: "binary_sensor.athom_garage_door_status", }, { sensor: "sensor.foo_battery_percentage", }, ] } }, -
@sdetweil
Sam
Thank you for all the help… I tried deleting the token. I made a new token in HA and used that one still nothing… I deleted the module from MM and I will try again this afternoon. Which fork did you use for your test? There are at least two just want to make sure I use the same one as you did…
Thanks
Chris -
@ChrisKelley I used this one
-
SAM!!!
Thank You!! It works… I was using a different fork then the one you used… plus I think my sensor strings were malformed. but all good now!Thank You Again!
-
@ChrisKelley woohoo… great news… thanks for the feedback!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login