Finally finished

Mykle1

More pictures and details please

Yeah, I’d like a story, too. And, at the very least, the dimensions and type of mirror glass you used and where you purchased it. (planning my next mirror) :-)

johnnyboy

This post is deleted!

johnnyboy

This post is deleted!

Mykle1

@johnnyboy said in Finally finished:

Lets hope support for MM lasts eh?

By then, “you’ll” be the support.

bluecaka69

So here’s a break down I used a 19" insignia tv monitor
The mirror is a two way smart mirror from http://www.twowaymirrors.com/smart-mirror/

The receptacle I used was a combo USB outlet. Is runs 5v 3.6a and powers the tv

From
http://m.homedepot.com/p/Leviton-15-Amp-Decora-Tamper-Resistant-Combination-Receptacle-and-USB-Charger-White-R02-T5631-00W/205730876?MERCH=REC-_-mobileweb_pip_rr-4-_-205092277-_-205730876-_-N

Raspberry pi3 to run magic mirror

Pir sensor from adafruit
https://www.adafruit.com/product/189

I used a three gang outlet box and since I only needed two spaces it allowed me to use a blank insert to mount the pir sensor in.

As for the leviton USB outlet I spliced into an outlet I had already installed I spliced into it to run the wires to a gang box behind the mirror. Leaving a seamless look.

I made the frame from poplar wood and stained it in ebony color

As for modules
I am using Wunderground
Random quotes
Flikr
Compliments
Date time

I kept it simply because i am really new at this but overall I love it

Sorry I don’t have more pics I didn’t even think about taking any during the process

Mykle1

@bluecaka69 said in Finally finished:

Sorry I don’t have more pics I didn’t even think about taking any during the process

Again, nice work! take more pictures on your next build. You know you’re gonna build another one.

Mykle1

@Mykle1 Is that glass or acrylic? And, 6mm or 3mm?

bluecaka69

@Mykle1 this is what I got it is glass and 1/4 in (6mm)

http://www.twowaymirrors.com/product/14x18-smart-mirror-sanded-edges/

johnnyboy

This post is deleted!

bluecaka69

@johnnyboy it was rather simply. I used https://github.com/paviro/MMM-PIR-Sensor

To run it just remember to use bcm numbering instead of gpio numbering

I did extend the wires and I used a ferrite bead to ensure there would be no interference…

Since me tv doesn’t have a true power saving I used
https://github.com/phrazelle/mm-pir-hide-all

To create the illusion it shuts off basically turns the screen black until the pir senses motion