Weatherunderground - currently - hourly - daily - configurable

RedNax

@CommanderB Thanks for cleaning up my messes! :)

The icons you seek are in the included weather-icons.css. I do agree you’d expect them in weather-icons-wind.css
However it’s entirely possible that MM uses the one weather-icons included in the vendor dir first. They’re not in that one.

.wi-wind-beaufort-0:before {
  content: "\f0b7";
}
.wi-wind-beaufort-1:before {
  content: "\f0b8";
}
.wi-wind-beaufort-2:before {
  content: "\f0b9";
}
.wi-wind-beaufort-3:before {
  content: "\f0ba";
}
.wi-wind-beaufort-4:before {
  content: "\f0bb";
}
.wi-wind-beaufort-5:before {
  content: "\f0bc";
}
.wi-wind-beaufort-6:before {
  content: "\f0bd";
}
.wi-wind-beaufort-7:before {
  content: "\f0be";
}
.wi-wind-beaufort-8:before {
  content: "\f0bf";
}
.wi-wind-beaufort-9:before {
  content: "\f0c0";
}
.wi-wind-beaufort-10:before {
  content: "\f0c1";
}
.wi-wind-beaufort-11:before {
  content: "\f0c2";
}
.wi-wind-beaufort-12:before {
  content: "\f0c3";

pugsly

if you put a copy of weather-icons-wind.css into the vendor/weather-icons folder that should fix it.

RedNax

@jagerpower You can set hourly to 0 in the config. This will remove the hourly forecasts… You can also adjust fcdaycount to the number of days you want to be shown.

jagerpower

@RedNax is it possible to remove the English translation in the alert?

RedNax

Could be done by manipulating the string, however this might break things when other languages are selected. Could even be dependent on your pws… I’ll have a go at making it configurable…

RedNax

It’s a bit of a hack, but after getting the new version from github you can define

alerttruncatestring: "english:"

in your config. The alerttext will hen be truncated at the defined word/string

paviro

@pugsly you should not let users add stuff to the vendor folder! Plugin should be self containing :)

pugsly

So I came home today and noticed that the weather had not refreshed in two days. When I did a pm2 mm restart it did refresh but now im wondering maybe its not refreshing on its own? is there a config setting for how often it does a refresh?

RedNax

@pugsly That’s strange! There is a setting, but it has a default 10 minute setting.
Did you look at the log for clues?

updateInterval: 10 * 60 * 1000, // every 10 minutes

djsunrise19

How can I find the locid? I try a few options but everytime I get an error in my console:

http://***:8080/modules/MMM-Wunderground//MMM-Wunderground.js
Failed to load resource: the server responded with a status of 404 (Not Found)

Also with: pws: ‘pws:IUTRECHT148’, OR pws: ‘NY/New_York’ OR pws: ‘locid:NLXX8014;loctype:1’

RedNax

Could you post the relevant config.js section? Could you also check on your pi if /modules/MMM-Wunderground/MMM-Wunderground.js actually exists?

djsunrise19

File exists! Config output (actually uncomment):

	//{
	//	module: 'MMM-Wunderground',
	//	position: 'top_right',  // This can be any of the regions.
	//								// Best results in left or right regions.
	//	config: {
	//		// See 'Configuration options' for more information.
	//		apikey: 'c4fbdf2a7b44d2bd', // private; don't share!
	//		pws: 'NY/New_York',
	//		//lang: 'DE', 
	//		fctext: '1',
	//			fcdaycount: "5",
	//			fcdaystart: "0",
	//			hourly: '1',
	//			hourlyinterval: "3",
	//				hourlycount: "2",
	//				alerttime: 10000,
	//				alerttruncatestring: "english:" // truncate the alertstring ath this word//

	//	}
	//},

RedNax

Any log available? At this point i have no clue why it would stall…

pugsly

Its been ok since I restarted so I am keeping an eye on it.

On another note, why do some configuration items use " ", some use ’ ’ and others don’t have any quotation marks at all?

I changed all of mine to ’ ’

djsunrise19

Thanks @pugsly, I checked that again, only with the following config:

	{
		module: 'MMM-Wunderground',
		position: 'top_right',
		config: {
			apikey: 'XXXXXX',
			pws: 'locid:NLXX8014;loctype:1'
		}
	},

Result is still a black screen. I can see that error on the console (on my computer):
Cannot GET /modules/MMM-Wunderground//MMM-Wunderground.js

But the file is in the folder. Weird!

djsunrise19

Perhaps I found something: The Filename is: MMM-WunderGround.js. Tha app is looking for MMM-Wunderground.js. If I change the filename to MMM-Wunderground.js, the mirror starts, but the Module don’t work.

I only see this:
0_1464276980611_upload-f8788a81-cd89-4a52-806e-da102ea6f282

djsunrise19

Any ideas?

djsunrise19

I cloned your repo to MMM-WunderGround and edited the module name also. Now it works. You should change your Readme.

Thanks for the cool module ;).

RedNax

@djsunrise19 Thanks for spotting my mistake :D I’ve modified the readme accordingly. Enjoy!

MagicCrumps1

it’s taking me forever but How do i change pws: ‘locid:’ for san francisco? I cant find the location ID for my city using google