[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

bill22

@evroom

Allright! :thumbs_up:

i have a picture overlay with the omxplayer showing the live stream TV signal!

Unfortunately it runs for a second and stops, continuously . > (buffer, cache,…?)

Audio is not there correctly. It sounds like white noise for a second and stops continuously.

bill22

@evroom

FYI:

/usr/bin/omxplayer --genlog --hw --win '351 968 703 1210' 'rtsp://192.168.178.1:554/?avm=1&freq=394&bw=8&msys=dvbc&mtype=256qam&sr=6900&specinv=0&pids=0,16,17,18,20,266,593,594,595,598,1801,1802,1803'

shows:

Video codec omx-mpeg2 width 720 height 576 profile 4 fps 25.000000
Audio codec mp2 channels 2 samplerate 48000 bitspersample 16
Subtitle count: 1, state: off, index: 1, delay: 0
V:PortSettingsChanged: 720x576@25.00 interlace:3 deinterlace:1 anaglyph:0 par:1.42 display:0 layer:0 alpha:255 aspectMode:0

evroom

@bill22
Getting somewhere.
Now you need to slowly add additional parameters.
Like --live --video_queue 4

bill22

i might be wrong. I added it here and received the error message “…file not found”:

/usr/bin/omxplayer --genlog --hw --win --live --video_queue 4 '351 968 703 1210' 'rtsp://192.168.178.1:554/?avm=1&freq=394&bw=8&msys=dvbc&mtype=256qam&sr=6900&specinv=0&pids=0,16,17,18,20,266,593,594,595,598,1801,1802,1803'

Do i need to add those parameters somewhere else?

evroom

@bill22

/usr/bin/omxplayer --genlog --hw --live --video_queue 4 --win '351 968 703 1210' 'rtsp://192.168.178.1:554/?avm=1&freq=394&bw=8&msys=dvbc&mtype=256qam&sr=6900&specinv=0&pids=0,16,17,18,20,266,593,594,595,598,1801,1802,1803'

bill22

@evroom

Thanks!
OK, positive effect on the video, running pretty smooth now!
Audio still missing…

evroom

@bill22
With Buck Bunny you had audio, right?
Audio over hdmi or audio jack?

Try adding --audio_queue 4
Then try removing --hw

bill22

@evroom

yes with Buck Bunny the audio was there.

I use audio over HDMI.

adding

--audio_queue 4

didn’t change the behaviour .

removed

--hw

Audio is working smoothly together with video ! !

evroom

@bill22
Great!!

Now you could try to enable the RTSPStream module again.
Use

url: ''rtsp://192.168.178.1:554/?avm=1&freq=394&bw=8&msys=dvbc&mtype=256qam&sr=6900&specinv=0&pids=0,16,17,18,20,266,593,594,595,598,1801,1802,1803'',

It can be that you need to play a little.

single quote single quote < url > single quote single quote
double quote single quote < url > single quote double quote
single quote < url with & > single quote

I hope you understand what I mean.

Look at the pm2 log for clues.

Over and out for today.

bill22

@evroom

Thank you very much for your guidance getting it to this point !!!

Great that it is working so far!

Have a good evening and i will follow your recommendations and let you know the outcome!

Bill