[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

evroom

@sdetweil said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

no port specified, has camera ip that worked with vlc.

What bothers me, is the fact that vlc did not take the supplied user and password, but queried again for it.
omxplayer will not do that; will just fail to open.

sdetweil

@evroom i was looking at the standalone omxplayer commandline we asked him to execute, not the
config

Number_5

@evroom

i have done 2 things.

a) create the textfile and opened it in the vlc player on raspberry - then answered the querry (user and id)j, so i could saw the camerastream

b) followed your steps:
step 6
Add the module to the config.js (replace the initial one):
vi ~/MagicMirror/config/config.js
after execute the commando "vi ~/MagicMirror/config/config.js " in commandline , the config.js openend

evroom

@Number_5

Could you please change your admin password of your cam to something without characters like ! and & ?
When really needed, use + and/or _.

Perhaps omxplayer has a parsing problem.
Even tough we use single quotes to avoid this.
I get the same error when using ?.

Then try (with the changed password):

omxplayer --genlog --avdict rtsp_transport:tcp --win 786,424,1138,666 --live --video_queue 4 --fps 30 --no-osd 'rtsp://admin:roland_1971@192.168.2.108/cam/realmonitor?channel=2&subtype=0'

You can also try the vlc player ‘trick’.
IMHO it should not ask for user & password.

Also try to play with the port.
Either nothing, or :80 or :554.

Btw, 192.168.2.140.2.108 is not a valid IP address.
It is either 192.168.2.108 or 192.168.2.140.
I guess 192.168.2.140 is your MM / Rasperry Pi IP and 192.168.2.108 is your Dahua cam IP.

Good luck.

Number_5

ok, sorry,

a) create the textfile and opened it in the vlc player on raspberry - then answered the querry **(user and password),not id !!!so i could saw the camerastream

evroom

@Number_5 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

after execute the commando "vi ~/MagicMirror/config/config.js " in commandline , the config.js openend

Yes, sorry about that, vi is a text editor.
Close it with :q! or [ESC]:q! (where [ESC] is the escape key)
Then use the editor of your choice, like nano.

nano ~/MagicMirror/config/config.js

evroom

@Number_5 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

ok, sorry,

I am sorry too :-)

Did you change the actual password of your cam or just changed the text in the admin:roland!?1971 part ?

I do not have a Dahua cam, so I do not know where and how to set it.
Probably there is a GUI (a web page) where you can do this.
I guess you can open it like this:
http://192.168.2.108
But once you did set it to the password we are seeing right now, so you ought to know :-)

Number_5

Hello,
would like to give you an interim report.

password has been changed, none

!?

Stream with VlC programm possible, without query , :-)
no error in the log file, see below
i will try more on Friday or Saturday

pi@raspberrypi:~/MagicMirror $ omxplayer --genlog --avdict rtsp_transport:tcp --win 786,424,1138,666 --live --video_queue 4 --fps 30 --no-osd 'rtsp://xxx.xxx@192.168.2.108:80/cam/realmonitor?channel=2&subtype=0'
Vcodec id unknown: ad
have a nice day ;)

pi@raspberrypi:~/MagicMirror $ omxplayer --genlog --avdict rtsp_transport:tcp --win 786,424,1138,666 --live --video_queue 4 --fps 30 --no-osd 'rtsp://xxx.xxx@192.168.2.108/cam/realmonitor?channel=2&subtyp
e=0'
Vcodec id unknown: ad
have a nice day ;)

pi@raspberrypi:~/MagicMirror $ omxplayer --genlog --avdict rtsp_transport:tcp --win 786,424,1138,666 --live --video_queue 4 --fps 30 --no-osd 'rtsp://xxx.xxx@192.168.2.108:80/cam/realmonitor?channel=2&subtype=0'
Vcodec id unknown: ad
have a nice day ;)

pi@raspberrypi:~/MagicMirror $ omxplayer --genlog --avdict rtsp_transport:tcp --win 786,424,1138,666 --live --video_queue 4 --fps 30 --no-osd 'rtsp://xxx.xxx@192.168.2.108:554/cam/realmonitor?channel=2&su
btype=0'
Vcodec id unknown: ad
have a nice day ;)

pi@raspberrypi:~/MagicMirror $ more omxplayer.log
18:31:12 T:1550613812   DEBUG: DllBcm: Using omx system library
18:31:12 T:1550615108   DEBUG: DllOMX: Using omx system library
18:31:12 T:1550615746   DEBUG: DllAvFormat: Using libavformat system library
18:31:12 T:1550617254   DEBUG: DBus connection succeeded
18:31:12 T:1550618196   DEBUG: Keyboard: DBus connection succeeded
18:31:12 T:1550618346   DEBUG: OMXThread::Create - Thread with id -1388339520 started
18:31:12 T:1550618446   DEBUG: DllAvUtilBase: Using libavutil system library
18:31:12 T:1550618468   DEBUG: DllAvCodec: Using libavcodec system library
18:31:12 T:1550618487   DEBUG: DllAvFormat: Using libavformat system library
18:31:12 T:1550618829   DEBUG: COMXPlayer::OpenFile - avformat_open_input rtsp://xxx.xxx@192.168.2.108:554/cam/realmonitor?channel=2&subtype=0
18:31:12 T:1550714583   DEBUG: COMXPlayer::OpenFile - avformat_open_input enabled SEEKING
18:31:13 T:1551680437   DEBUG: COMXCoreComponent::Initialize OMX.broadcom.clock input port 80 output port 81 m_handle 0x6d6140
18:31:13 T:1551681127   DEBUG: OMXClock::OMXStop
18:31:13 T:1551681450   DEBUG: OMXClock::OMXSetSpeed(0.00) pause_resume:1
18:31:13 T:1551681918   DEBUG: DllAvUtilBase: Using libavutil system library
18:31:13 T:1551681973   DEBUG: DllAvCodec: Using libavcodec system library
18:31:13 T:1551682018   DEBUG: DllAvFormat: Using libavformat system library
18:31:13 T:1551682225   DEBUG: OMXClock::OMXStop
18:31:13 T:1551684333   DEBUG: OMXThread::Run - Exited thread with  id -1388339520
18:31:13 T:1551684932   DEBUG: OMXThread::StopThread - Thread stopped
18:31:13 T:1551688082   DEBUG: COMXCoreComponent::Deinitialize : OMX.broadcom.clock handle 0x6d6140

Thanks for your help

Number_5

Hello,
thats the logfile without a port:

omxplayer --genlog --avdict rtsp_transport:tcp -pi@raspberrypi:~/MagicMirror $ omxplayer --genlog --avdict rtsp_transport:tcp --win 786,424,1138,666 --live --video_queue 4 --fps 30 --no-osd 'rtsp://xxx:xxx@192.168.2.108/cam/realmonitor?channel=2&subtype=0'

Vcodec id unknown: ad
have a nice day ;)

pi@raspberrypi:~/MagicMirror $ more omxplayer.log
20:09:20 T:18446744072557925778   DEBUG: DllBcm: Using omx system library
20:09:20 T:18446744072557926899   DEBUG: DllOMX: Using omx system library
20:09:20 T:18446744072557927508   DEBUG: DllAvFormat: Using libavformat system library
20:09:20 T:18446744072557928896   DEBUG: DBus connection succeeded
20:09:20 T:18446744072557929631   DEBUG: Keyboard: DBus connection succeeded
20:09:20 T:18446744072557929778   DEBUG: OMXThread::Create - Thread with id -1388339520 started
20:09:20 T:18446744072557929873   DEBUG: DllAvUtilBase: Using libavutil system library
20:09:20 T:18446744072557929894   DEBUG: DllAvCodec: Using libavcodec system library
20:09:20 T:18446744072557929910   DEBUG: DllAvFormat: Using libavformat system library
20:09:20 T:18446744072557930230   DEBUG: COMXPlayer::OpenFile - avformat_open_input rtsp://xxx:xxx@192.168.2.108/cam/realmonitor?channel=2&subtype=0
20:09:20 T:18446744072558104967   DEBUG: COMXPlayer::OpenFile - avformat_open_input enabled SEEKING
20:09:21 T:18446744072559101936   DEBUG: COMXCoreComponent::Initialize OMX.broadcom.clock input port 80 output port 81 m_handle 0x79d170
20:09:21 T:18446744072559102429   DEBUG: OMXClock::OMXStop
20:09:21 T:18446744072559102650   DEBUG: OMXClock::OMXSetSpeed(0.00) pause_resume:1
20:09:21 T:18446744072559103080   DEBUG: DllAvUtilBase: Using libavutil system library
20:09:21 T:18446744072559103130   DEBUG: DllAvCodec: Using libavcodec system library
20:09:21 T:18446744072559103172   DEBUG: DllAvFormat: Using libavformat system library
20:09:21 T:18446744072559103634   DEBUG: OMXClock::OMXStop
20:09:21 T:18446744072559115423   DEBUG: OMXThread::Run - Exited thread with  id -1388339520
20:09:21 T:18446744072559115981   DEBUG: OMXThread::StopThread - Thread stopped
20:09:21 T:18446744072559118051   DEBUG: COMXCoreComponent::Deinitialize : OMX.broadcom.clock handle 0x79d170

evroom

@Number_5

Can you try this, to try to see what codec is used?

omxplayer --info --genlog --avdict rtsp_transport:tcp --win,424,1138,666 --live --video_queue 4 --fps 30 --no-osd 'rtsp://xxx.xxx@192.168.2.108:554/cam/realmonitor?channel=2&subtype=0'