[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

BKeyport

@sdetweil If you read it, They’re renaming the OS.

sdetweil

@BKeyport yes, I knew they were renaming… but also that s mostly applied tot he 64 bit version.
whatever, commands in progress on my 4

BKeyport

@sdetweil I read it as “Going forward” - meaning all releases after the date of announcement. But, as it’s still debian based under the hood, the commands would be the same (Or apt-get instead)

BKeyport

You know, it figures… I say it’s stable, and it’s back to pre-PI 4 tricks. It’ll run for about two days before crashing, but that’s a lot better than pre-may2020 Buster - which was 5 minutes at the most.

sdetweil

@BKeyport wow… my pi4 has been booted solid for weeks… (last manual update boot)

dwburger

Updating didn’t solve the problem. Just wondering…I’ve seen recent references to using OMXplayer independent of MM2. Does this mean that the OMXplayer window is on top of the MM2 screen or somehow incorporated into it. Could someone give me a little push into understanding this?

evroom

@dwburger said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

Could someone give me a little push

When using the module or not, omxplayer always will be an overlay on top of your MM display.

Test if it works at all (example for an Axis IP camera):

$ omxplayer --avdict rtsp_transport:tcp --live --video_queue 4 --fps 30 --win "0 625 590 957" rtsp://user:password@192.168.178.56/axis-media/media.amp?resolution=640x360

With log:

$ omxplayer --genlog --avdict rtsp_transport:tcp --live --video_queue 4 --fps 30 --win "0 0 640 360" rtsp://user:password@192.168.178.56/axis-media/media.amp?resolution=640x360

The positioning of the stream can be a bit of a pain.
Size of video stream:
(x2 - x1) x (y2 - y1) = 640 x 360

To use it under control of pm2 (iso of vi you also can use nano):

$ cd /home/pi
$ vi axis.sh
#!/bin/bash
echo "Starting Axis stream ..."

# No rotation
omxplayer --avdict rtsp_transport:tcp --live --video_queue 4 --fps 30 --win "0 625 590 957" rtsp://user:password@192.168.178.56/axis-media/media.amp?resolution=640x360

$ pm2 start axis.sh
$ pm2 save

To see it run:

$pm2 status

To restart it:

$ pm2 restart axis

To stop it:

$ pm2 stop axis

To remove it from pm2:

$ pm2 delete axis

dwburger

@evroom said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

omxplayer --genlog --avdict rtsp_transport:tcp --live --video_queue 4 --fps 30 --win “0 0 640 360” rtsp://user:password@192.168.178.56/axis-media/media.amp?resolution=640x360

I’m just getting the “have a nice day” error. What would the most basic omxplayer command be? I just want to see the Wyze rtsp stream anywhere on the RPi 4 screen. I’ve tried: omxplayer rtsp://:@IP address and I get the “have a nice day” error.

evroom

@dwburger said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

I’m just getting the “have a nice day” error.

Can you see if the omxplayer.log gives a clue?
And what would your VLC url look like?

It can be that your cam or codec is not supported.

BKeyport

@dwburger Try this:

https://www.ispyconnect.com/man.aspx?n=Wyzecam

get a URL from them, then use that URL directly in OMXPlayer…

omxplayer [URL]

No other options, YET.

once you get that going, you can position and set FPS, etc.