MMM-Strava

hattlegr

@ianperrin I went right back to the beginning and started the installation again to ensure I save each step.
During the process I picked up on an error I did not follow up on. After installing --production I had to run ‘npm audit fix’

After running this I tried the authentication again. This time the process did add the token.js file to the MMM=Strava module.

I believe it is working now. I have logged off and rebooted to confirm and the Strava module was working correctly.


pi@raspberrypi:~/MagicMirror/modules/MMM-Strava $ git checkout develop && git pull
Branch develop set up to track remote branch develop from origin.
Switched to a new branch 'develop'
Already up-to-date.
pi@raspberrypi:~/MagicMirror/modules/MMM-Strava $ npm install --production
npm WARN conflict A git conflict was detected in package-lock.json. Attempting to auto-resolve.
npm WARN conflict To make this happen automatically on git rebase/merge, consider using the npm-merge-driver:
npm WARN conflict $ npx npm-merge-driver install -g
npm WARN deprecated nomnom@1.8.1: Package no longer supported. Contact support@npmjs.com for more info.
added 55 packages from 67 contributors and audited 3075 packages in 32.396s
found 1 moderate severity vulnerability
  run `npm audit fix` to fix them, or `npm audit` for details // Was important to run this command to make authentication process work correctly


pi@raspberrypi:~/MagicMirror/modules/MMM-Strava $ npm audit fix
npm WARN deprecated nomnom@1.8.1: Package no longer supported. Contact support@npmjs.com for more info.
added 537 packages from 583 contributors in 92.726s
fixed 1 of 1 vulnerability in 3075 scanned packages
pi@raspberrypi:~/MagicMirror/modules/MMM-Strava $ npm audit
                                                                                
                       === npm audit security report ===                        
                                                                                
found 0 vulnerabilities
 in 3075 scanned packages
pi@raspberrypi:~/MagicMirror/modules/MMM-Strava $

// Config 
{
			module: "MMM-Strava",
			position:  "center",
			config: {
				client_id: "3---6",
				client_secret: "f22b--------------------0d9f7",
				mode: "chart",
				auto_rotate: "true",
				units: "imperial"
			}

lavolp3

@ianperrin said in MMM-Strava:

@zerodegree79 , @Val07300, @ctatos (and others I may have missed).

A new (beta) version of the module with support for Strava’s new authentication flow is available.

Just wanted to report that the module is working fine until now using the development branch.

What I would like to implement is some kind of a record panel showing the fastest 1k, 5k, 10k for running 20k, 40k, for cycling etc.
I can’t see this in the API. Does anyone know a way to extract these values?

Lorenz

When i use the new development branch the api for profile switcher isn’t working anymore. (the notification from MMM-Remote to be exact)

lavolp3

Hi all, Hi @ianperrin

I love hunting for segments and for that I would like to include some kind of “crown board” calculating golden, silver and bronze crowns for first, second and third places in segments.
At a later stage I can imagine including more information, e.g. some kind of notification if you lose a first pace to someone else.
However, it’s not easy to get these numbers via the API.

So, to summarise: I need the count of podium places for segments in running and cycling. These can change over time! So need to be checked and counted regularly.

For these I need all segments the athlete has competed in.

My approach would be:
Go through ALL activities, pick segment ID’s, combine these and search through each segment leaderboard for the athlete’s name.
However, this would be a LOT of API calls. And these are limited to 600 in 15 min. With a few hundred activities these can be exceed easily.
So the call would somehow need to be stretched and used not with every other call.

Any other ideas or input for this idea?

Thanks for every input, as always!

lavolp3

Hi all, hi @ianperrin ,it’s me again.

I’m coding a lot with this module trying to build a bigger version of it, and stumbled upon some odd thing. I have included some console logs and found that for some reason the socket notification “SET_CONFIG” is received twice when the module starts, leading to two api calls directly after another. I can only see one send in the browser console from MMM-Strava.js, but two notification receives in the npm logs. Can someone duplicate our even explain this odd behavior?
Thanks!

dnovacik

Don’t forget that Strava is switching to using refresh tokens from 15th October 2019 and won’t be supporting forever tokens anymore. I started writing a little Strava api library in js, currently with only 2 endpoints and going to add up more ofc.

https://github.com/dnovacik/strava-minimal-api

lavolp3

@dnovacik Well this module uses the strava-v3 nodejs library by unboundev.
github link.
I guess that is where the new token procedure should be implemented isn’t it?
Care to take a look?

ianperrin

@dnovacik

The develop branch for the module contains the changes to support the new authentication approach - I’ll merge that back into the master branch in the coming weeks so the module can continue to be used

@lavolp3

I extended the Strava-v3 package (see https://github.com/ianperrin/MMM-Strava/blob/develop/strava_api.js) to support the new authentication methods. I guess these could be incorporated into a pull request for the core package now that it is active again ;)

dnovacik

@ianperrin gj then, can’t wait to try out the module!

zolabus

I can’t use the module anymore
If I try to reauthorize i have this error

{“message”:“Bad Request”,“errors”:[{“resource”:“Authorize”,“field”:“scope”,“code”:“invalid”}]}

Any help please?
Thanks

ianperrin

@zolabus said in MMM-Strava:

I can’t use the module anymore
If I try to reauthorize i have this error

{“message”:“Bad Request”,“errors”:[{“resource”:“Authorize”,“field”:“scope”,“code”:“invalid”}]}

Any help please?
Thanks

@zolabus - I’ve just released version 2.0.0 of the plugin which is available via the Master branch. Can you try this version?

When updating please make sure you run npm install --production from the MMM-Strava directory.

If you continue to get these errors, please check the Authorization Callback Domain in your Strava API Settings (https://www.strava.com/settings/api) matches the IP address/URL used to access MagicMirror

zolabus

@ianperrin
Hi I updated the module
When I restart the Magic Mirror I receive this
MMM-Strava: “Received notification: SET_CONFIG”
MMM-Strava: “Legacy config in use for module_14_MMM-Strava”
MMM-Strava: “Getting data for module_14_MMM-Strava”
MMM-Strava: “Access token not found for module_14_MMM-Strava”

zolabus

@ianperrin
Issue resolved thanks

MisterT

Hi everybody,
I posted in troubleshooting section but i don’t know if it’s visible. That’s why i post here. I don’t understand the step 2 and the step 5 in Tutorial about MMM-Strava. I have a ID and a secret but i don’t know what i write in case:

APi Name
Category
Club
WebSite
Description
and Callback domain

In Website and Callback domain what i write?
In callback domain, i put my IP to my magic mirror like 192.128.1.99:8080 but nothing happen

Can anybody help me please?

ianperrin

@MisterT

When creating your Strava API Application in Step 2, the key value is the Authorisation Callback Domain. This needs to the IP address or domain name you use to access the MagicMirror otherwise subsequent steps will fail. So in your case it looks like you should use 192.128.1.99

Once the API Application is created, add the module to your config.js file with the client_id and client_secret then restart the mirror.

The module should then state Client id unauthorised and provide a link to the authorisation process. At which point you should be able to follow step 5

Here’s two screenshots which might help:
Strava API Settings

Strava API id and secret

MisterT

ok thanks ianperrin for your help
Step 2 is ok because on magic mirror, i have the link on magic mirror : client unauthorized see /MMM-Strava/auth/

but now in step 5, i make:
in webpage, and magic mirror starting i put
http://192.128.1.99:8080/MMM-Strava/Oauth/
but nothing happen. The webpage says:
host unreachable
ERR_CONNECTION_REFUSED

have you an idea?

ianperrin

@MisterT is it possible you’re typing in the wrong url. Try using
http://192.128.1.99:8080/MMM-Strava/auth/ or simply clicking the link displayed by the module on the mirror.

If that fails, are you able to access your mirror via http://192.128.1.99:8080/ ?

Finally, can you make sure you ran npm install --production in step 1 and restarted the mirror?

MisterT

hI @ianperrin
It Works !!!
Nice explanations.
My mistake is when i launched a webpage to write the url i stoped the MM by Ctrl+Q. Now with MM start and a webpage opened. Everything is alright

Thanks for your help

MisterT

hI @ianperrin
I have another problem with MMM-Strava.
I use it with MMM-Pages and MMM-Pages indicator. When i place the module in the config.js MMM-Pages settings, the Rotation of MMM-Pages doesn’t work and i have a error on Magic mirror when i press CTRL+SHIFT+i.
See Thread below for mox explanations

MMM-Pages no rotate

Have you an idea?

ianperrin

@MisterT thanks for the report.

I don’t have any experience with MMM-Pages so will have to install it and take a look if I experience the same issues.

Have you any idea what might be causing it?