MagicMirror Forum
    • Recent
    • Tags
    • Unsolved
    • Solved
    • MagicMirror² Repository
    • Documentation
    • 3rd-Party-Modules
    • Donate
    • Discord
    • Register
    • Login
    A New Chapter for MagicMirror: The Community Takes the Lead
    Read the statement by Michael Teeuw here.

    IR touch frame

    Scheduled Pinned Locked Moved Hardware
    touch ir frametouch
    9 Posts 5 Posters 8.9k Views 3 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • yawnsY Offline
      yawns Moderator
      last edited by

      I should’ve mentioned the TFT is 32" … I knew I forgot something important.
      I will try to contact one of these vendors to see if they can provide something for me.

      ? 1 Reply Last reply Reply Quote 1
      • ? Offline
        A Former User @yawns
        last edited by A Former User

        @yawns I’d never imagined how “Bigger-Touch-Frame-Than-Screen” works.
        How can it map the touch-coordination into the real-screen-coordination? Very interesting.

        brobergB 1 Reply Last reply Reply Quote 1
        • brobergB Offline
          broberg Project Sponsor @Guest
          last edited by

          @Sean There should be a calibration tool with all sorts of touch-methods, where you define at least three points on the screen so the drivers can calculate where you actually touch and not only a default setting.

          1 Reply Last reply Reply Quote 1
          • yawnsY Offline
            yawns Moderator
            last edited by

            Interesting thoughts, Sean and broberg. Makes me realize I basically know nothing about how IR touch frames work, how input is provided to the operating system and how coordinates are mapped. Looks like I need to read some more on this aspect before moving forward…

            1 Reply Last reply Reply Quote 0
            • yawnsY Offline
              yawns Moderator
              last edited by

              I picked this up again and checked with “Peau Productions”. This is their positive feedback:

              Hello Stefan,
              Yes this diagram looks like an ideal smartmirror setup. Usually the monitor is only using the upper half of the mirror. We can certainly get you a custom frame to match but I will need to know your exact Length x Width dimms and your diagonal dimm. I will also need to know how many touch points you would like supported “2,6, 12, 32, 50+” touch points. Once I have this info I can get you a mechanical drawing and a quote. Any other questions, please let me know.
              Best regards

              Hopefully I find some spare time during christmas break to find some measurements.

              strawberry 3.141S 1 Reply Last reply Reply Quote 1
              • cowboysdudeC Offline
                cowboysdude Module Developer
                last edited by

                When I got my 32" IR Touch frame I asked about calibration and they told me none was needed… that was my experience…

                1 Reply Last reply Reply Quote 1
                • strawberry 3.141S Offline
                  strawberry 3.141 Project Sponsor Module Developer @yawns
                  last edited by

                  @yawns said in IR touch frame:

                  I picked this up again and checked with “Peau Productions”. This is their positive feedback:

                  Hello Stefan,
                  Yes this diagram looks like an ideal smartmirror setup. Usually the monitor is only using the upper half of the mirror. We can certainly get you a custom frame to match but I will need to know your exact Length x Width dimms and your diagonal dimm. I will also need to know how many touch points you would like supported “2,6, 12, 32, 50+” touch points. Once I have this info I can get you a mechanical drawing and a quote. Any other questions, please let me know.
                  Best regards

                  Hopefully I find some spare time during christmas break to find some measurements.

                  that sounds interesting if it is not super expensive i might get this as well as my monitor will be also just a quarter of the mirror

                  Please create a github issue if you need help, so I can keep track

                  1 Reply Last reply Reply Quote 0
                  • 1 / 1
                  • First post
                    Last post
                  Enjoying MagicMirror? Please consider a donation!
                  MagicMirror created by Michael Teeuw.
                  Forum managed by Sam, technical setup by Karsten.
                  This forum is using NodeBB as its core | Contributors
                  Contact | Privacy Policy